Skip to content

AirGradient GO v1.0

Choose a tag to compare

@Gingerman1996 Gingerman1996 released this 24 Aug 03:54
· 17 commits to main since this release

First official hardware release of the AirGradient GO — a portable, battery-powered air quality monitor.

Boards in this release

Board Version Layers Production set
Main board (PCB/airgradient-go-main/) 1.0 4 Airgradient-GO_1.0
LED + touch controller (PCB/led-touch/) 1.0 2 AG-GO-LED_1.0
Touch pad (PCB/touch-pad/) 1.0 2 Touch_sensor_v1.0
SCD4x module — optional (PCB/scd4x-module/) 0.1 2 SCD4x_module_0.1

Highlights

  • MCU: ESP32-C5-MINI-1 (Wi-Fi)
  • Sensors: Sensirion SPS30 (PM), Senseair S12 (CO₂), SGP41 (VOC/NOx), SHT4x (T/RH), DPS368 (pressure), LIS2DH12 (accelerometer)
  • GPS: TAU1113 receiver with dedicated antenna
  • Display & UI: 2.13″ black-and-white e-paper, RGB LED indicators, capacitive touch controls
  • Power: 505060 Li-Po pouch cell, USB-C charging (BQ25628), fuel gauge (BQ27427), TPS63802 buck-boost, TPL5010 hardware watchdog
  • Storage: W25N512 NAND flash (with alternative footprint option)
  • The SCD4x daughterboard is an optional CO₂ alternative; the standard configuration uses the on-board Senseair S12.

Production files

Ready-to-order Gerber/BOM/CPL sets (JLCPCB-compatible, LCSC part numbers) are in each board's production/ directory and attached to this release.

Design files

KiCad 10. All libraries are bundled in libraries/ and referenced project-relative — the projects open with no extra setup.

License

Open-source hardware under CC BY-SA 4.0.