Skip to content

v2.0.0b17

Pre-release
Pre-release

Choose a tag to compare

View all tags
@GreenGrassBlueOcean GreenGrassBlueOcean released this 03 Nov 23:38
· 20 commits to v2-phase1-architecture since this release
2.0.0b17
eb3457e
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.

🚀 Pre-Release: v2.0.0b17 — In Traces We Find The Truth (Field-Testing Beta)

61 pull requests since b16, on OWNd 2.0.0b13. Requires Home Assistant 2026.3 or newer.

"In traces we find the truth."
Once again, our community of testers and trace contributors has proven that building rock-solid OpenWebNet integrations cannot be done by guessing or assuming protocol behavior. It is only when authentic on-wire bus frames are captured, analyzed against firmware oracle verdicts, and deterministically replayed in CI that edge cases vanish and true hardware fidelity is reached.

⚠️ Behaviour changes: covers (WHO 2), #770, #778, #837, #847

  • Timed covers: open_cover, close_cover, scope runs, and wall-switch full runs now settle on travel_time + 2 s from known positions too. Previously only set_cover_position: 0 / 100 and runs from unknown settled on the travel timer, while full runs from a known position waited for the actuator's own *2*0*WHERE## stop status (~60 s at factory M=0, 120 s at M=1 on F411 actuators driving 60–86 s shutters in #770, or never on M=4 / gateways that do not relay it). Every full run of a timed cover now reports 0 % / 100 % (closed / open) once the stored travel time plus 2 s has passed, and recomputes the remaining settle delay if myhome.set_cover_travel_time or myhome.reset_cover_travel_time is called mid-run (#834).
  • Timed covers: the actuator's own stop up to 0.5 s before the stored travel time is the end stop. On a full run from a known position (own open_cover / close_cover, a scope run, a wall-switch run) a plain *2*0*WHERE## that arrives within 0.5 s before travel_time now settles the cover at 0 % / 100 % at once instead of freezing the timed estimate one or two percent short of the end (measured on live F461 / F411/2 at 5.82 s: limit stop came 5.74–5.76 s after motor start and left open 1 % / open 98 %) (#847).
  • Configurable min_position_delta (1–5 %, default 2 %). Requested in discussion #770 by @eC0y0te for tall shutters and fine slat angle adjustments where 1 % motor increments (~0.5 s) are physically meaningful (#778).
  • WHO 2 command-translation stop frames (*2*1000#0*WHERE##) stop active timed runs. Gateways such as MyHomeServer1 occasionally relay a keypad or scenario stop only as *2*1000#0*WHERE## without trailing plain status (#645); timed covers now freeze position and cancel settle timers on translated stops (#834).
  • myhome.calibrate_cover refuses every configurator run-time limit, not only 60 s. Runs ending near whole-minute limits (59–65 s, 119–130 s on F411 at M=1, up to 10 min) are rejected immediately as actuator_limit failures rather than stored as false travel times (#837, #843).

⚠️ Other behaviour changes

  • Lighting: fine dimmer preset echo & coarse curve alignment. Fixed preset echo synchronization on fine dimmers (WHAT 101–199) and autodiscovered dimmers (#851, #852), and aligned coarse preset curve values with hardware dimming levels (#828).
  • Climate: 3550 99-zone Central Unit hydration & diagnostics. Full mode hydration, active setpoint management, and diagnostic attributes for BTicino 3550 master panels following real-plant traces from Discussion #819 (#845, #846).
  • Climate: Thermo actuator switch platform. New manual switch entities (switch) to directly actuate heating solenoids on demand (Issue #785, #817).
  • Binary Sensors: UI inverted state option. Added per-entity UI option to invert binary sensor states (Issue #826, #829).

Other changes

  • Engine & Gateways: Pinned upstream OWNd 2.0.0b13 (#848); added profile alias for Legrand 067292 gateway (Issue #832, #854); per-firmware startup requests (#794); manual gateway model identification in config flow (#804); resolved flaky multi-gateway dispatcher callbacks (#850); door-entry WHO 6 gateway boundary enforcement (#835).
  • Audio (WHO 16 / 22): F500 FM tuner entities now support band, preset, and frequency controls with live HL4684 trace replay (#839); stored station frequency range checks and Dimension 10 bounds (#844); fixed-feed amplifier volume (#774).
  • Burglar Alarm (WHO 5): Added HomeKit arm-away read-only mode (#842); integrated live BTicino 3486 central unit alarm trace replay (#841).
  • Lighting & Actuators: Clean coexistence when a lighting actuator and motion detector share the same SCS address WHERE (#777, #781); Dimension 22 guard form crash fix (#849); bus-truthful state updates and resync coordinator (#771).
  • Covers: Unknown start position handling (#795); cover device class refinements (#796); scope member settle travel recompute (#820).
  • Home Assistant 2026.11 / 2026.12 Readiness: Entity compat_name registry preservation (#772); logger compatibility (#769); deprecation guards active across test suites (#790).
  • Trace Replay CI Engine: Over 5,300 automated tests passing with 100% statement coverage (5,324 tests), backed by new on-wire plant fixtures across F461, HL4684, Legrand 067292, F454, MH200N, and MH201.

👥 Heartfelt Thanks to Our Reviewers, Contributors & Trace Providers

Our deepest thanks to everyone who makes this project possible:

  • Reviewers & Maintainers:
    • @anotherjulien for establishing the foundations of MyHOME on Home Assistant.
    • @fedem95 and @Interstellar0verdrive for continuous deep code reviews, timing insights, and platform guidance.
    • @gdluck for outstanding engineering, invaluable ideas, and rigorous physical F461 plant measurements.
  • Trace Contributors & Testers:
    • @TheDarkWizard for crucial CEN+ wire address captures (KW8011), WHO 1001 diagnostics, and tireless real-world hardware testing across Living Now controls and MyHomeServer1 setups.
    • @wave68runner for the authentic HL4684 touchscreen captures, BTicino 3550 thermoregulation sweeps, and tuner diagnostics (#818, #839).
    • @simo72mast-lab for the BTicino 3550 / MH200N thermoregulation traces and mode diagnostic captures (Discussion #819, #845).
    • @manfredgittmaier-afk for detailed MH200N + F411 timing reports that shaped the end-stop settle engine (#770, #834, #847).
    • @eC0y0te for the F454 + F401 Venetian slat captures that led to min_position_delta (#770, #778).
    • @lionelser for the Legrand 067292 gateway diagnostics that closed Issue #832 (#853, #854).
    • @marcob79 for the MH201 + F414 dimmer traces (#824, #827).
    • @f18m for the BTicino 3486 central burglar alarm traces (#841).
    • @caiosweet for the MH200N dimmer traces (#776).

Docs: https://openwebnet-ha.github.io/MyHOME/beta/

Feedback and logs: https://github.com/orgs/OpenWebNet-HA/discussions/856

Assets 3
Loading