Repository navigation
opendash 0.4.3 — the adapter's address from its own network
Context: one change on top of 0.4.2. A new release of the manufacturer's software asks
SM3 owners to update the adapter's Wi-Fi module, and the module firmware that update
installs does not contain the address the app has always used,192.168.81.1.Deliverable:
android-arm64-v8a-release.apkandandroid-x86_64-release.apk,
versionCode 7, versionName 0.4.3, minSdk 26, three languages (en/es/de). Signed with the
same key as 0.4.0–0.4.2, so it installs over them and keeps presets, scans and recordings.
1. The change
Until now the adapter's address was a fixed setting, 192.168.81.1 unless changed by hand.
The Link screen, under Adapter, now has Address from the adapter's DHCP, on by
default. When Connect is pressed, the app takes the address from the adapter's network:
- The DHCP server of that network, which is the adapter itself (Android 11 and newer).
- Otherwise, its default gateway.
- Otherwise, the address typed in, now labelled Fallback address.
The address found is shown on the screen and in the section summary.
This is how the manufacturer's own app finds the adapter. It keeps working if a Wi-Fi
module firmware moves the access point to another subnet.
2. Which network is asked
- The network the app joined itself, if there is one.
- Otherwise, a Wi-Fi network the system has not validated as having internet.
The adapter's access point never has internet, and a home router always does. So a phone on
its home Wi-Fi never takes the router for the adapter, and falls back to the typed address.
Turn it off to always use the typed address: for an emulator, or a bridge reached over
an ordinary network.
3. What the Wi-Fi module update changes, and what it does not
Checked against the manufacturer's software 2.21.35, 2.22.3 and 2.22.4, and against the
module firmware itself:
- The frames are the same in all three versions: port 777, the 16-byte header, the
h4
CRC and theh8sum. - The module does not look inside them. It is a TCP-to-UART bridge for one client at a
time, so the update changes nothing the app sends. - What was left unproven was the address, and this release stops depending on it.
Host tests unchanged and passing. Release APKs built from the tagged commit and checked
against 0.4.2's signing certificate. Not yet run against an adapter with the updated Wi-Fi
module.