Repository navigation
SafeKeepVault v1.47
Release Date: October 19, 2026
Build: v1.47 · build 291 · 1ddc94b · 2026-10-19
SafeKeep can now update itself from a signed file, without reflashing and without touching your vault. Getting there takes one last reflash, onto a flash drive of 8 GB or more. Earlier changes are in the v1.46 release notes.
Sticks set up with v1.46 or earlier have the older layout and can't update in place.
To move to v1.47:
Make an Encrypted Backup.
Copy it off the stick.
Flash v1.47 onto a flash drive of 8 GB or more.
Restore.
The update guide walks you through it.
If your stick is smaller than 8 GB, flash v1.47 onto a new one and keep the old stick until you've checked the new one.
🔄 Update SafeKeep, without reflashing
A new section in Device Options. To update:
Copy a signed update file (SafeKeep-Update-v….tar) onto the Transfer Drive.
Click Check for update.
Click Install, then Restart now.
Checks: it installs only if the file carries the maintainer's signature (checked with the key built into the stick) and is newer than what you're running.
Before installing, it shows the version, the build stamp and the app's SHA-256, to compare with the release's SHA256SUMS.
Your vault and Transfer Drive are never touched.
If an install fails, the version you're running is unchanged, and Show update log says why.
The first update file will come with v1.48. No v1.46-or-older stick can use one, so none ships with this release.
💾 Two copies of the system
The stick now holds two copies of SafeKeep's operating system.
An update is written into the spare copy and checked before it's switched on. A power cut or a bad file never leaves a stick that won't start.
The version you updated from stays available as previous version in the start-up menu.
New layout:
a 3.5 GB system partition;
a 2.5 GB Transfer Drive, big enough for an update file.
The image is 6.7 GB, so it needs an 8 GB stick, but the download is still about 1.3 GB.
🔊 A sound for each QR code read
Every scanner in the app plays the soft hover tick when it reads a QR code.
For an animated QR, it ticks again for each new frame, so you can hear a transaction coming in.
It follows the sound settings in Device Options.
🎲 Check Verifiable Dice on Ian Coleman's tool
The Verifiable Dice panel now explains how to check your words on Ian Coleman's BIP39 tool:
choose entropy type Base 10 (its Dice type counts a 6 as 0 and gives different words);
set the same word count.
Do this only with practice rolls, or with the tool's offline copy on a computer that never goes online again.
✅ Verifying This Release
The USB image (SafeKeep-Release-v1.47.zip):
Download SafeKeep-Release-v1.47.zip, SHA256SUMS.txt and SHA256SUMS.txt.asc.
Verify the signature:
gpg --verify SHA256SUMS.txt.asc SHA256SUMS.txt
Expect a good signature from Anton anton@safekeepbitcoin.com, key fingerprint A333 EB82 6F70 A79A 736F 0994 8EA7 DD8C EDBA 86C2.
Unzip, then check the image hash:
shasum -a 256 -c SHA256SUMS.txt
Expected: 9f280d363fa6b2b99dee9bdbf533abd3fe18d3ffff2738bf076bac870deab4b7 SafeKeep-Release-v1.47.img
The app on its own (boot.html; its checksum file is SHA256SUMS, without .txt):
sha256sum -c SHA256SUMS
gh attestation verify boot.html -R Pasalon0404/SafeKeepVault
gpg --verify SHA256SUMS.asc SHA256SUMS
Expected: e65b81f4bf45f4c70e83b6aa5073cf926354620a896a6da82d5f2266a2a3ae62 boot.html
The boot.html inside the USB image is byte-for-byte this release's boot.html. See VERIFYING.md for every check.