Skip to content

LoRa-OTA bootloader rev 8

Pre-release
Pre-release

Choose a tag to compare

@Passaita Passaita released this 28 Oct 00:48
· 3 commits to main since this release

LoRa-OTA bootloader rev 8 for the RAK3401 (OTAFIX 2.3-BP1.4 fork, SoftDevice S140 6.1.1). It applies the firmware a MeshCore
LoRa-OTA repeater downloaded over LoRa. The app is in MeshCore-LoRa-OTA.

New in rev 8: the RAK13302 1 W booster stays off while the bootloader runs. Before, it could brown out a board on a weak battery
when Bluetooth DFU started, and the DFU request was lost. Everything of rev 7 is kept: LZMA apply from the slot, bootloader over LoRa,
Bluetooth into the slot (fw pull-ble), 5-minute DFU timeout, triple-click RST, stock apps up to 792 KiB.

File Use
LoRa-OTA-bootloader-rev8_s140_6.1.1-ONBOARD.zip by Bluetooth from the stock OTAFIX bootloader (start ota); upload the app zip right after
LoRa-OTA-bootloader-rev8-bootloader_only.zip by Bluetooth from an older LoRa-OTA bootloader; upload the app zip right after
LoRa-OTA-RAK3401-bootloader-rev8.lota over LoRa: nodes take it from a neighbour (fw blupdate bl-rev-8), app kept
LoRa-OTA-bootloader-rev8.hex SWD (program ... verify, never a mass erase)
LoRa-OTA-bootloader-rev8-update.uf2 UF2 drag and drop

fw bl on the node shows rev 8, served image crc32 E0BC335E. Host test: 5153 power-cut checks. Rebuilds byte for byte (see the
README). A Bluetooth or USB bootloader update erases the app, so always upload the app zip right after. Over LoRa the app is kept.

Experimental community firmware, not an official Adafruit, OTAFIX or RAKwireless release.