Repository navigation
Releases
MiniFuse 2 for Linux v0.1.1 — testing
MiniFuse 2 for Linux 0.1.1
Download the application package for your distribution:
- CachyOS: minifuze2-0.1.1-1-cachyos-x86_64.pkg.tar.zst
- Arch Linux: minifuze2-0.1.1-1-arch-linux-x86_64.pkg.tar.zst
- Ubuntu 24.04: minifuze2_0.1.1-1_amd64.deb
To use hardware switches and meters, also install the optional DKMS package:
Arch/CachyOS ·
Ubuntu.
Matching kernel headers and a separate setup step are required. If you already
installed the module manually, read the migration instructions first.
Install the application package with sudo pacman -U ./FILE.pkg.tar.zst or
sudo apt install ./FILE.deb. See the installation and migration guide.
There is no project package repository or automatic update service yet.
This version adds English and Russian desktop language selection and improves
readability in both themes. Change the language under Settings → Appearance →
Language and reopen the window. The fallback web panel remains in Russian;
system dialogs and some detailed errors may use their original language.
This is an independent application for the Arturia MiniFuse 2. It has been
physically tested with one device on CachyOS at 48 kHz with automatic buffer
settings. Other distributions, sample rates, small buffers and long sessions
need more testing. Please report issues with your distribution, kernel, PipeWire
version and steps to reproduce at GitHub Issues.
Remove serial numbers, private paths and audio from reports. Firmware updating
and physical MIDI DIN transfer remain unsupported or unverified.
SHA-256 checksums
a7b3a81b6af633af1f07aebb86afe036f8ca405504bbb6c199f43d59afb42217 minifuze2-0.1.1-1-arch-linux-x86_64.pkg.tar.zst
3ab98f6e1cc3084724adfea50fd21609b9fbf25d39ed0e8414db4f285083043f minifuze2-0.1.1-1-cachyos-x86_64.pkg.tar.zst
8991436c16cbcdfc5eea00f96b61a184712a59d1fb544fca18113d2e0a76b5de minifuze2_0.1.1-1_amd64.deb
885425b3a6b8d12693ab30f7e56d8418785f4852d0df5a29334cbb552d700539 minifuze2-ctl-dkms-0.2.0-1-any.pkg.tar.zst
17d81ef9da9103a49df3878b0fec0476ef98ac1c3d49bfd3b1bfed565f4d6be7 minifuze2-ctl-dkms_0.2.0-1_all.deb
Run sha256sum FILE and compare the output with the corresponding value.
MiniFuse 2 for Linux v0.1.0
MiniFuse 2 for Linux 0.1.0
An independent Linux mixer and control panel for Arturia MiniFuse 2. This
release brings the compact GTK desktop, software mixing and tested hardware
controls together in an installable application.
- Compact dark mixer with an optional light theme and a master strip that stays visible.
- Three stereo mixes, source gain/pan/Mute/Solo, master Mute and Dim (−20 dB).
- Numeric level entry, double-click reset and 32-step Undo/Redo.
- Portable Linux presets, working-mix recovery, names, input Link and channel visibility.
- Four stereo playback endpoints and four recording endpoints in PipeWire.
- INST 1/2, shared +48V, Direct Mono, hardware loopback controls and input meters through the separate control module.
- Owned-file installation and update with rollback. Closing the window keeps the audio service running.
- Clearer control-device errors and installation guidance for selecting a card across USB ports.
Downloads and installation
Native application packages are available for Ubuntu 24.04 amd64, Arch Linux
x86_64 and CachyOS x86_64. The optional minifuze2-ctl-dkms 0.2.0 package
is separate. Each download has a SHA256 sidecar. Download the package for your
system and install it with sudo apt install ./FILE.deb or
sudo pacman -U ./FILE.pkg.tar.zst; dependencies come from your distribution.
Arch and CachyOS binaries are built separately because their library ABIs may
differ. AUR-ready source bundles are included; AUR submission and a project
update repository remain future work.
See package installation and migration
before replacing a script/manual installation. Packages do not restart a running
mixer, reload the control module or select a device during installation. After a
fresh DKMS install, use sudo minifuze2-ctl-setup --user YOUR_DESKTOP_ACCOUNT
to select one connected MiniFuse and grant access. Matching kernel headers are
required. Existing differing settings are retained for review.
The native packages use the original application source commit 676bec2;
package metadata also records the later packaging revision. The original
source/binary archives and v0.1.0 tag are retained.
Use the Ubuntu 24.04 x86_64 archive on Ubuntu 24.04, or build the source
archive on another supported Linux setup. The binary archive uses system
libraries; it is not a universal Linux package. Both archives include source,
installation tools, licenses and a BUILD-INFO.json recording version and
source commit. SHA256 sidecars and an internal file manifest accompany the files.
Verify the downloaded archive before extracting it:
sha256sum -c minifuze2-0.1.0-ubuntu-24.04-x86_64.tar.gz.sha256
tar -xzf minifuze2-0.1.0-ubuntu-24.04-x86_64.tar.gz
cd minifuze2-0.1.0
sha256sum -c SHA256SUMS
bash tools/install_desktop.shRun the application installer as your desktop user. For an existing managed
installation, close the window and use bash tools/install_desktop.sh --update.
The mixer briefly restarts; presets and service settings are retained. Extra
hardware controls need the separate 0.2.0 kernel module and matching kernel
headers. See docs/installation.md and the Russian docs/quickstart.ru.md.
Tested scope
Physical qualification uses one MiniFuse 2 with firmware 1.5.0, CachyOS
x86_64 and kernel 7.3.1-1-cachyos. The qualified audio mode is 48 kHz
with automatic rate/buffer settings. Ubuntu 24.04 receives CI build, software,
GTK, archive and kernel compilation checks; physical Ubuntu qualification is
not available.
Hardware evidence covers analog loopback, headphone playback, Main Mute/Dim,
XLR microphone recording with +48V, direct mono/stereo and software monitoring,
and an Ardour 9.8 playback/recording session. USB reconnect and port changes,
installed service updates, host PipeWire restart and one suspend/resume cycle
also recovered the mixer. The control module must already use serial selection
for hardware controls to follow a USB-port change. Detailed results and their
limits are in docs/hardware-validation.md.
The installed 0.1.0 also completed a 20-minute playback observation: 238 state
checks and 40 complete one-second digital buffers with no clipping. The operator
confirmed clean music. The test sampled audio periodically and restarted the
file between passes; it does not claim gapless playback or zero xruns.
The final installed-version check on 7.3.4-1-cachyos verified both 0.1.0
executables against their installation manifest. A complete one-second digital
monitor buffer contained stereo music without clipping. The 15-second microphone
file contained exactly 720,000 stereo 24-bit frames at 48 kHz, with no clipped
samples. Input 1 peaked at −0.19 dBFS; slightly lower hardware gain is recommended
for more headroom. The operator confirmed clean music and recorded voice in both
headphones. Mix, selected card, engine process, default devices and clock settings
were retained. The operator enabled +48V before recording, and that setting was
retained. No voice recording or personal data is included in this release. See the
final audio report.
Known limits
- Disconnecting USB or restarting PipeWire interrupts audio. Ardour's JACK engine needed reconnection after the host PipeWire restart; its saved project was retained.
- Firmware updates and physical MIDI DIN transfer are not supported by this application.
- Other sample rates, small buffers, repeated suspend and other distributions/devices still need physical qualification. After a real upgrade to kernel 7.3.4-1-cachyos, DKMS, serial-selected control and hardware meters were checked. Final headphone music playback and a 15-second XLR microphone recording/replay also passed at 48 kHz Auto; the operator confirmed clean stereo music and voice in both headphones. A new DAW session on that kernel remains untested. Compiling a module for another kernel does not qualify operation on it.
- The desktop currently uses Russian. English translation, accessibility and broader HiDPI testing remain future work.
- Linux presets retain Solo/Dim/master Mute; Windows
.mfpexport requires disabling those controls and an imported Windows template. Back up presets before returning to an older application: this release writes Linux document version 4. - Presets do not switch +48V/INST, select a device or change shared PipeWire rate/buffer settings. Manual clock changes affect the host and are refused while another physical audio device is active.
This project is independent of Arturia. The kernel control module is optional
for standard ALSA audio and does not implement firmware writing.
MiniFuse 2 for Linux v0.1.0-rc.1
MiniFuse 2 for Linux 0.1.0-rc.1
This release candidate adds a compact studio mixer and independent Linux presets.
- Graphite desktop by default, with a light studio theme in Settings. Existing theme preferences are retained.
- Master channel stays visible while source channels scroll. Hardware switches are in the bottom bar; device selection and loopback settings are in the Device menu.
- Solo per source, master Mute and Dim (−20 dB), precise numeric gain entry, and double-click reset for faders and pan.
- Undo/Redo for the last 32 software changes, Ctrl+Z / Ctrl+Shift+Z, Ctrl+S and Ctrl+O.
- Names, input Link and virtual-channel visibility work immediately without a Windows preset.
- Open/save portable Linux
.jsonpresets, including all three mixes and presentation. Versions 1–3 of the earlier state files remain readable. - A mixer draft survives reconnection to the service. Hardware commands are not replayed after a connection failure.
bash tools/install_desktop.sh --updateupdates owned files, keeps settings and restores previous files if updating fails.
Build from the source archive with the dependencies in README.md, or use the
Ubuntu 24.04 x86_64 binary archive on that system. Its binaries link to Ubuntu's
system libraries; it is not a universal Linux package. Run
bash tools/install_desktop.sh without sudo. For an existing managed installation,
close the window and use --update; an active owned mixer service briefly stops
and restarts. Reopen the desktop afterwards.
Solo, Dim and master Mute apply to the selected software mix. Mute takes priority
over Solo. They are preserved in Linux presets. Turn them off before Windows
.mfp export; export needs an imported Windows template to retain its unknown fields.
Presets never switch +48V/INST or change the global sample rate and buffer.
This candidate has local automated software and isolated GTK coverage, plus a
48 kHz OUTPUT L → INPUT 2 measurement on MiniFuse 2 firmware 1.5.0. Gain, pan,
Solo, Dim, Mute, presets, engine restart, owned-link repair and same-port USB
reconnect passed. Hardware switch readback and an actual user-service update
also passed; +48V was left off. Listening and ordinary DAW acceptance remain.
MIDI DIN transfer, firmware updates, small-buffer qualification and
additional distribution/hardware combinations remain outside the supported claims.
The separate kernel module remains version 0.2.0.
Detailed scope and numeric reports are in docs/hardware-validation.md.
Verify archive hashes using the accompanying .sha256 file. Source archives also
include an internal SHA256SUMS manifest. The release workflow publishes a
prerelease after both Ubuntu application tests and kernel compilation pass.