Skip to content

CleanWRT 25.12.5-R2.1

Latest

Choose a tag to compare

@github-actions github-actions released this 10 Nov 13:59
6b90e6f

CleanWRT 25.12.5-R2.1 for the Arcadyan AW1000 (OpenWrt 25.12.5, qualcommax/ipq807x).

What this release is

The second stable release of the OpenWrt 25.12.5 base. R1 is the release before it. The package
set is R1's with one move: the phone port goes from AWvoice 1.1.3 to 1.1.5, and no other line of
the manifest differs between the two releases. The image also carries two changes around the
new-firmware notice: it is on from the first boot, and the Attended Sysupgrade pages are no longer
in the menu.

This is not marked as a prerelease.

What changed since 25.12.5-R1

  • AWvoice 1.1.5. A refused call no longer leaves the line busy: the audio path stands by again
    instead of running for silence, which showed on the Health card and in the load average. The
    work before it made an idle line cost nothing, set a factory modem in PCM master mode to slave by
    itself, let a call go out on either voice domain, kept the page's send level under its ceiling,
    and put the serving cell and one signal line on the Health card.
  • The new-firmware notice is on out of the box. LuCI's Status → Overview asks whether it may
    look for a newer CleanWRT, and stores the answer in
    attendedsysupgrade.client.login_check_for_upgrades. files/etc/uci-defaults/52-cw-upgrade-check
    writes that answer, and only when it is absent. A fresh flash therefore has the notice on, while
    an answer you gave — either way — is kept across upgrades. The number 52 matters: the package's
    own 50-attendedsysupgrade creates the config file first, and a write below 50 would be
    overwritten. Stop showing upgrade alerts remains the way off.
  • The Attended Sysupgrade pages are out of the menu, both the parent node and the two pages
    under it, with their views. The check itself stays and reads the site's version file; it never
    installs anything.

What is in the image

AWvoice 1.1.5 (awvoice-phoned, luci-app-awvoice and kmod-awvoice-fxs at 1.1.5-r1), the phone
port's SIP side with the web phone, the scanned provisioning code and quiet hours, Footstrap as the
default look with Argon and Alpha beside it, luci-app-cw-led 1.0.0-r1 with the page's surfaces
taken from the active theme, the six patches to the LAN SIP service, and the vendor VoIP engine
kept off the boot path.

Install

From stock, the first install uses the initramfs image and the TFTP steps in the installation guide.
The layout must be the expanded one the README describes: this image needs 514 UBI PEBs for its
volumes, where the stock 100 MiB layout leaves 316.

From R1, flash the sysupgrade image:

scp cleanwrt-25.12.5-r2.1-qualcommax-ipq807x-arcadyan_aw1000-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/
ssh root@192.168.1.1 "sysupgrade -v /tmp/cleanwrt-25.12.5-r2.1-qualcommax-ipq807x-arcadyan_aw1000-squashfs-sysupgrade.bin"

The call log, the recordings, the messages and your greeting live under /etc/awvoice/, and the
phone package ships a keep-list entry for that directory, so a keep-settings sysupgrade carries
them across and sysupgrade -b includes them. The file names carry the version in lower case, as
OpenWrt writes them.

Verify before you flash

sha256sum -c sha256sums.cw

That is the whole file, images and provenance bundle together, once provenance.tar.gz has been
unpacked beside it: twelve lines, the three images and the nine provenance files. The bundle holds
the full build .config, the seed, the pinned feeds and local packages, this build's package
manifest, and provenance.txt, which names the commit the build ran from:
6b90e6fdcf4967e7980eb5a859775517c15c006c. The sysupgrade image is 129,014,038 bytes against a
130 MiB gate.

A stable release, with the same limits

R2.1 is a stable release of this base, not a certification. The image is for the Arcadyan AW1000
with the expanded flash layout and nothing else. The phone port is not equipment for emergency
calls: it works while the router has power, the modem is registered for VoLTE and the operator
carries the call, and there is no battery backup. QModem, which the 5G stack and the SIP service
come with, carries a non-commercial clause — read the licence
notices
before any business use. The
known limits are collected at
https://pr0luci.github.io/cleanwrt-aw1000/docs/faq/#known-limits.

If something is wrong, report it with the version from cat /etc/openwrt_release and, for the phone
port, the output of apk list --installed | grep awvoice. Do not paste passwords or keys.