Skip to content

Releases

v0.3.5

Choose a tag to compare

@github-actions github-actions released this 14 Nov 05:11
5624011

The CLI now asks the Switch which CLI version exists instead of reading the public release list, so a release can be scheduled ahead of its announcement. Against a Switch that does not report the route, the CLI reads the release list as before.

A running Claude Code session now survives past the 7-day sign-in deadline instead of ending when the device token cannot be refreshed.

Every launcher's credential command now records the stable prizmal path.

Harness input names are declared in each harness's own package.

Full changelog: v0.3.4...v0.3.5

v0.3.4

Choose a tag to compare

@github-actions github-actions released this 12 Nov 04:32
8f0ac86

prizmal login on a device whose key is still approved now says so instead of pretending a browser approved it. It prints "This device is already approved until ." and no approval link. "Approved in your browser." appears only after an approval actually happened.

prizmal login --reapprove renews an approved device when you ask it to, and pushes the 7-day deadline back. A plain prizmal login never starts an approval on its own.

prizmal auth token and the login wait now say to run prizmal login when the Switch reports the device was revoked.

Full changelog: v0.3.3...v0.3.4

v0.3.3

Choose a tag to compare

@github-actions github-actions released this 11 Nov 23:06
814907d

prizmal login asks the Switch where to approve a device. The approval link now comes from the Switch the CLI talks to, so the approval page and the Switch can't belong to different deployments. When the Switch doesn't report a page, the CLI uses the default approval page and says so. PRIZMAL_APP_URL and the config file's app_url are retired. A config file that still has app_url loads, and the CLI ignores the field.

A revoked device gets a new key. When the Switch says this device was revoked, prizmal login says so and offers to back up the old key (to device.key.revoked-<UTC timestamp>, mode 0600). It then makes a new key and starts a normal approval. With no terminal, it backs the key up without asking and prints the path. prizmal auth token and the login wait now say to run prizmal login when the device was revoked.

The CLI sends its version to the Switch in x-prizmal-client-version.

A --model you type is sent to the Switch even when the model list leaves it out.

Kilo's input modalities are read from the capability vocabulary.

--help documents the config file's per-harness launch arguments.

Full changelog: v0.3.2...v0.3.3

v0.3.2

Choose a tag to compare

@github-actions github-actions released this 05 Nov 21:04
3266813

Device login works without an environment setting

prizmal login and prizmal auth token no longer read or send PRIZMAL_DEVICE_ENV. The refresh signature binds the device and the timestamp, and the Switch supplies the environment from its own deployment. A config file with base_url and app_url is all a login needs.

Remove the variable from any shell profile. The CLI ignores it now.

Release notes come from the tag again

The release workflow now fetches the annotated tag before publishing, so each release body contains the message written for it.

Full changelog: v0.3.1...v0.3.2

v0.3.1

Choose a tag to compare

@github-actions github-actions released this 05 Nov 18:32
a8215cd

Device login reads the app URL from your config

prizmal login now takes the consent page from the app_url field in ~/.prizmal/config.json, with $PRIZMAL_APP_URL ahead of it. A switch other than the production API no longer opens the production page, and when the switch names another environment with neither setting present, login stops and reports both settings it needs.

The config file's app_url pairs with its own base_url. If --url or $PRIZMAL_SWITCH_URL points at a different switch, set $PRIZMAL_APP_URL too. A config file this build cannot parse now stops the login instead of falling back to the default switch.

--pick keeps config options this build does not recognize

Saving the config used to rewrite the file through a struct that declared only the fields this build knows, so picking a model deleted any other top-level option you had added. Unknown options now survive every save, and the CLI prints one warning per key it kept.

Full changelog: v0.3.0...v0.3.1

v0.3.0

Choose a tag to compare

@github-actions github-actions released this 04 Nov 23:09
b0fdd2f

v0.3.0

This release adds Kilo Code and brings device login to Codex, OpenCode and Cline. Every model picker now leads with the tier aliases your tenant holds.

Features

  • Kilo Code. prizmal kilo launches Kilo Code against the Switch. The launch starts a per-session loopback relay for your credential, so a device login refreshes on every request. --api responses or --api anthropic picks another wire API.
  • Codex runs on a device login. The launch sets a command-backed provider auth that runs prizmal auth token, and it runs the helper again after a 401. A Codex launch also doesn't write a profile or catalog under ~/.codex. It runs with --no-daemon and gives Codex the system prompt of its installed version's default model.
  • Codex's /model lists the same rows as the prizmal picker, in the same order, with the Switch's labels and descriptions, the low, medium and high reasoning efforts, and a 1,000,000-token context window. Tier rows read Sol, Terra, Luna and Astra.
  • Cline lists your model names in its /model picker and runs on a device login through the relay. The launch also installs a local prizmal_search plugin. Provider state follows --data-dir or CLINE_DATA_DIR.
  • OpenCode runs on a device login and refreshes the token before each request.
  • Tier rows in every picker. The picker leads with the tier aliases your tenant holds (frontier, core, flash, premier), and each harness labels them in its own words. A model with a tier appears in that tier's row, and a tenant with no tiers sees its models by name.
  • --relay routes any harness through a per-session loopback relay. The harness receives a placeholder credential, and the relay sends the real one on each request.
  • --api picks the wire API: chat, responses or anthropic.
  • Harness arguments in config. A harnesses section in ~/.prizmal/config.json adds arguments to every launch of a harness, keyed by the integration name.
  • A saved default only when you ask. A model you choose in the picker during a plain launch runs that launch only. Press ctrl+s, or pass --pick, to save it. A machine that signed in with a device key can save a default too. prizmal login also recovers from an expired sign-in instead of stopping.
  • --subagent-model with Codex. Codex now receives the flag as its agents.default_subagent_model setting, the same way Claude Code already did.

Fixes

  • A non-interactive launch with no model stops with an error that lists the names --list returns.
  • A launch never sends the default placeholder. The placeholder no longer appears in the picker or in --list.
  • A model grouped under a tier still shows its own name in the picker.
  • prizmal builds the Switch URL in one place, so a URL with a trailing slash no longer produces /v1/v1.
  • prizmal login starts polling for approval as soon as the consent URL prints.
  • A Windows launch stops after 7 minutes with an error that reports the timeout.
  • The CLI no longer carries a built-in non-production API host. A login against https://api.prizmal.ai opens https://app.prizmal.ai, and another host uses the PRIZMAL_APP_URL you set.

Release prepared by cc-gentle-okapi-28.

v0.2.0

Choose a tag to compare

@github-actions github-actions released this 07 Oct 22:15
4f83e90

Changelog

  • a2559dd Capture Claude Code's /usage screen as a terminal baseline (#12)
  • 382ece7 Compact the Claude Code session at 90% of the stated context window (#55)
  • a67f209 Declare the Codex context window instead of deriving it from nothing (#22)
  • aff0509 Drop ghost modules with no production caller (#19)
  • 722386b Let one module own ~/.prizmal/config.json (#18)
  • 428707c Make --list report the tier aliases a launch can route to (#20)
  • f4e6efb Offer an upgrade before a launch when a newer release exists (#54)
  • b53f835 Record Codex's terminal screens as baselines against a pinned Codex (#47)
  • f02d578 Run Pi from a device login through a token-refreshing extension (#53)
  • 84fe65c Sign in with a device key instead of a pasted switch key (#13)
  • 5efe8a7 Start haiku-tier Claude Code sessions in auto mode, with a 1M window (#14)
  • 4f83e90 Stop the update test from racing its own temp-directory cleanup (#56)

v0.1.2

Choose a tag to compare

@github-actions github-actions released this 01 Oct 00:30
65bec01

Changelog

  • 3c054d3 Add the attach-screenshots skill for agents
  • 34c9edf Break the Claude Code command in the README onto one line per variable
  • e835c54 Document how to run Claude Code against the Switch without prizmal
  • c579906 Give each baseline capture its own mktemp directory
  • f7a10a0 Merge pull request #5 from PrizmalAi/test/terminal-baselines
  • aece09c Merge pull request #6 from PrizmalAi/fix/claude-default-opus-model
  • efcf79b Merge pull request #7 from PrizmalAi/docs/claude-code-without-cli
  • 2572fa0 Merge pull request #8 from PrizmalAi/remove-websearch-capability-mark
  • ef7dde1 Merge pull request #9 from PrizmalAi/fix/picker-help-line-filter-keys
  • e133d95 Name the README section after the Prizmal CLI
  • 65bec01 Offer the four Claude tiers first, labelled by the configs that serve them (#11)
  • b0270ab Read a symlink as its target in the ticket-reference scan
  • 7672f36 Read the README with CRLF line endings in the Claude Code test
  • 1fc7af2 Remove the README test for the Claude Code section
  • e4efb29 Run each tier-named model in Claude Code as the tier it names (#10)
  • 8d3c6f1 Run every harness against a stub switch, one workflow per harness
  • e324b8c Show only the picker's active keys on the help line
  • cbc1c20 Show the pinned model in the /model picker's Default row
  • d4d18eb Stop setting CLAUDE_CODE_MODEL_CAPABILITIES on a Claude Code launch
  • 7d514e2 Tell agents to check the screenshot rule before opening the PR

v0.1.1

Choose a tag to compare

@github-actions github-actions released this 28 Sep 17:20
39caf18

Changelog

  • 05fcab6 Merge pull request #1 from PrizmalAi/readme-brew-install
  • 23cf9e1 Merge pull request #2 from PrizmalAi/cmd-prizmal
  • 9bb6572 Merge pull request #3 from PrizmalAi/pin-pr-body-action
  • 39caf18 Merge pull request #4 from PrizmalAi/cask-postflight-steps
  • c9fafbf Move the command to cmd/prizmal so go install names the binary prizmal
  • 92fe780 Pin gh-pr-body-action to v1.2.1, which pins its own setup-node
  • cfcd28c Put the install steps first in the README, with brew install on top
  • 03ce2eb Strip the cask's quarantine flag with postflight_steps

v0.1.0

Choose a tag to compare

@github-actions github-actions released this 28 Sep 16:24

Changelog