Repository navigation
Releases
0.4.2-rc1 - Drebin (pre-release)
PS2 Memory Card Inspector 0.4.2-rc1 "Drebin" (pre-release)
This is a release candidate. Everything below passes the host test suite
(with ASan/UBSan) and the PS2 build, and the signed/encrypted formats are
byte-identical to MemcardRex and Apollo Save Tool. None of the new card
write paths have been run on real hardware yet. Keep a backup of any card
you use with it, and please report results.
Fixed
.ps2ECC now matches PCSX2 and mymc. 0.4.0/0.4.1 left bit 7 set in the
second ECC byte of about half of all 128-byte chunks. New exports are
standard; older Drebin images still verify and restore (reported as
ecc=legacy-drebin-0.4).- Save titles decode.
icon.systitles are Shift-JIS byte strings; they
were read as 16-bit values, so nearly every title fell back to the folder
name. - The title resolver now uses the same superblock rules as the image browser.
New
- Import almost any save container, detected by content (the extension
is only a hint):- PS2:
.psu,.max/.pws,.cbs,.sps/.xps,.psv - PS1 saves:
.mcs/.ps1,.psx/.mcb/.mcx/.pda,.psv, raw saves - PS1 cards:
.mcd/.mcr/.mc/.bin/.ddf, POPStarter.VMC,
.gme/.dex,.mem/.vgs,.vmp, encrypted.mcx
- PS2:
- PS1 memory cards as import targets. Card images import all of their
saves or none. - Convert on USB with a choice of output: PS2 →
.psu/ signed.psv;
PS1 save →.mcs/ signed.psv/.psx; PS1 card →.mcd/.gme/
.vgs/ signed.vmp/ encrypted.mcx. - Raw PS1 saves: the save name is shown and editable on the pad, with a
product-code check and a guess from the file name. - Replace file in save: swap one raw data file inside a PS2 save, after a
verified.psubackup, through a verified temporary copy. - SHA-256 of every image, and
.mci.txtsidecar v2 with superblock health
(bad blocks, backup blocks, card flags). Existing keys are unchanged.
Things to know
- On a PS1 card, the memory-card driver clears deleted-but-recoverable save
entries whenever a save is created. The import screen warns about this. - A bad PSV/VMP signature or MCX checksum is reported, not fatal: edited
saves are often unsigned. - Files carried over from MAX saves get the card's own creation time (the
format stores none). - A PS3 has not yet been shown to accept a Drebin-signed PS2
.psv.
Hardware checks wanted
- Export a
.ps2;mymcplusplus ecc_checkis clean andsha256in the
sidecar matchessha256sum. - Restore an old 0.4.1
.ps2image. - Import a GameFAQs
.max,.cbs,.spsand.psv; the game loads them. - Import a
.mcsand a.gmeonto a PS1 card; a PS1 game sees the saves. - Name conflicts and a full PS1 card are refused before any write.
- Replace a file inside a PS2 save; the backup appears and the game loads it.
- Convert a
.gmeto.mcdand load it in POPStarter or an emulator.
Release assets
MC_INSPECTOR-0.4.2-rc1-Drebin.ELF- the programMC_INSPECTOR-0.4.2-rc1-Drebin.zip- the ELF plus third-party notices and
license texts
Full details: CHANGELOG.md, docs/SAVE_TRANSFER.md, docs/CARD_TOOLS.md.
0.4.1 - Drebin
PS2 Memory Card Inspector 0.4.1 "Drebin"
0.4.1 is a focused bugfix release for the 0.4.0 Drebin line.
Fixed
- Prevented FMCB installation from corrupting the USB FAT filesystem with
fragments of diagnostic text. - Extended exclusive
mass:ownership across the complete FMCB
revalidation/installation attempt, including MagicGate IOP handoffs. - Retained each successfully preflight-bound KELF in EE RAM and reused it
during the transaction, so the installer no longer repeatedly rebuilds the
security IOP/USB stack after the recovery journal has become active. - Kept PADMAN out of the temporary MagicGate security personality because the
CardAuth path does not need a controller server. - Fixed the false initial
RAM ring corruption at slot=0diagnostic by
initializing the checksum for the pre-populated session line. - Clarified that
fileXioSync()on the current PS2SDK USBHDFSD/vfat stack is
not a real durability barrier when the driver returns the observed EIO path.
Hardware validation
The corrected installer was re-tested on real PlayStation 2 hardware and no
longer damaged the USB filesystem during FMCB installation.
Release asset
This maintenance release intentionally publishes only:
MC_INSPECTOR-0.4.1-Drebin.ELF
No benchmark, Performance Lab, async/NOWAIT, raw-batch A/B or alternate
transport binaries are included.
0.4.0 - Drebin
PS2 Memory Card Inspector 0.4.0 "Drebin"
Drebin is the first full write-capable release of PS2 Memory Card Inspector.
It promotes the hardware-validated MagicGate/CardAuth work into a transactional
cross-region FreeMcBoot installer and adds Card Tools, recovery, persistent
settings and the production P0 optimization pass.
Release profile
0.4.0 ships as one production build:
-O2 -G0
-mtune=r5900 on measured hot objects
P0 synchronous production batching
The release intentionally does not publish:
- USB speed-test variants;
- async/NOWAIT candidates;
- raw batch-size A/B builds;
- Performance Lab binaries;
- synthetic R5900 benchmark builds.
Highlights
- Full cross-region FMCB installation from a user-supplied package.
- Preflight binding of every distinct selected KELF before the first card write.
- Persistent rollback journal with card identity checking.
- Full close/reopen/read-back verification for installation writes.
- Compatibility profiles for retail CEX, real DEX, MechaPwn DEX/CEX,
unqualified DEX-like state and PSX/DESR classification. - Real-hardware-qualified MechaPwn DEX exception for CEX-only ENDVDPL.
- Legacy recovery-journal v1 reader and safe v1 -> v2 conversion.
- Card image export, verify and exact restore.
- Filesystem-aware image browser and save-transfer workflows.
- Persistent versioned Settings config.
- Native/480p/576p/720p/1080i display modes.
- P0 production improvements retained without release benchmark variants.
- R5900 tuning retained on measured hot objects.
- Improved Drebin logging with mass-storage ownership guards and ring-integrity
diagnostics.
FMCB installer
The installer discovers a complete FMCB 1.966 package recursively from USB.
Before touching the card it:
- identifies the ROM/MechaCon/MechaPwn profile;
- selects the appropriate cross-region manifest;
- checks card filesystem health and free space;
- bind-probes every distinct selected KELF source on the actual target
hardware.
Only after those gates pass does the transaction begin.
Each destination follows:
capture/backup
-> read source
-> KELF bind when required
-> write
-> close
-> reopen
-> full read-back verification
-> commit
Any failure keeps or executes recovery state rather than silently leaving a
partially installed card.
Cross-region policy
Drebin prepares real regional copies for the I/A/E/C system folders rather than
using classic Multi-Install filesystem crosslinks.
Early-Japanese boot files and HDD-support resources are retained in the package
model for compatibility with old boot ROMs.
MechaPwn / DEX ENDVDPL exception
Real-hardware qualification on a MechaPwn SCPH-50000 profile showed:
- FMCB.XLF binds successfully;
- OSDSYS.XLF binds successfully;
- OSD110.XLF binds successfully;
- the 128-byte CEX ENDVDPL.XRX is rejected at
DOWNLOAD HEADERbefore
Kbit/Kc/CardAuth.
Reference FMCB already omits ENDVDPL from its DEX table.
Drebin therefore omits this CEX-only payload for:
- a real DEX ROM profile;
- a positively fingerprinted MechaPwn DEX-mode profile.
A generic DEX-like state is not enough to trigger the exception automatically.
MagicGate and card compatibility
Drebin keeps the hardware-proven logical/physical port rule:
libmc mc0/mc1 = 0/1
SECR/SIO2 MC channels = 2/3
Translation occurs only at the SECR boundary.
The release does not reject cards by branding or nominal capacity. Real
hardware confirmed that a non-Sony card with functional MagicGate can complete
FMCB installation and boot successfully.
Cards without functional MagicGate can still be ordinary PS2 storage but fail
the CardAuth/KELF gate as expected.
Recovery
The v2 recovery journal records:
- captured destinations;
- backups where existing files must be restored;
- created system/config directories;
- target card identity;
- transaction state.
Recovery verifies the same card before restoring or deleting anything.
The installer can also read old v1 journals and convert them in RAM after
validating their original checksum.
Card Tools
0.4.0 includes:
- full-card image export;
- image verification;
- exact restore;
- card/image filesystem browser;
- selected save import/export;
- PSU transfer support;
- backup-aware force format;
- hot-swap-aware card workflows.
Persistent Settings
SQUARE on the Settings page writes a versioned text config:
mass:/MCI/MCINSPECTOR.CFG
Saved values:
- video mode;
- filesystem-test profile;
- preserve-existing-CNF policy;
- installer read-back verification mode.
Save is performed through a temporary file, full read-back comparison, rename
and device sync.
P0 production pass
The public release retains the safe P0 production choices:
- synchronous raw-card streaming;
- fixed production batch sizes;
- reduced unnecessary copies where the 0.4 architecture already supports it;
- R5900-specific fast-copy path;
-mtune=r5900on measured hot objects;-O2global optimization baseline.
Experimental USB throughput variants, async fileXio candidates and Performance
Lab executables remain development-only.
Hardware qualification
Real-hardware testing established, among other cases:
- Sony 8 MiB cards with functional MagicGate;
- a non-Sony MagicGate-capable card with successful FMCB install and boot;
- a third-party non-MagicGate card correctly rejected by CardAuth while
remaining usable for normal storage; - successful rollback after an intentionally failing ENDVDPL transaction;
- repaired recovery readiness after security-personality IOP rebuilds;
- cross-file logger/recovery corruption fixes around fileXio/USB ownership.
Settings and payloads are not bundled
The project does not redistribute FreeMcBoot or Sony ROM payloads.
Provide your own complete FMCB package. See docs/FMCB_PACKAGE.md.
Build and provenance
Canonical release environment:
ps2dev/ps2dev:v2.0.0
Pinned PS2SDK security-source revision:
a13b5971ec0e39c7ba8b8559b80a4e81c8425352
The release archive contains the ELF, SHA-256, source provenance, project
license, PS2SDK AFL-2.0 text, credits and third-party notices.
Known scope
- PSX/DESR is classified by the compatibility layer but its separate X* manifest
and twin-sign install path are not enabled in this PS2 release. - ROM 2.30+ native OSD-update autoboot is classified as blocked; preparing a
card for another console/bootstrap is a separate capability. - Unknown modchips and odd MechaCon states are resolved conservatively by real
selected-KELF preflight rather than model-name heuristics.
0.2.0 - Briscoe
PS2 Memory Card Inspector 0.2.0 "Briscoe"
Briscoe is the first stable release of PS2 Memory Card Inspector with a real-hardware-validated MagicGate/CardAuth capability probe built on the modern PS2SDK 2.0 SECRMAN 1.4 stack.
Highlights
- Hardware-validated, RAM-only MagicGate/KELF capability probe.
- Modern PS2SDK 2.0
secrman_special1.4 with matching SECRSIF and card-side modules. - Critical SECR/SIO2 port fix:
mc0logical0 -> 2,mc1logical1 -> 3at the SECR boundary only. - In-path GET_KBIT diagnostics without replaying authentication commands.
- Correct distinction between ordinary filesystem compatibility and real CardAuth/MagicGate capability.
- Read-only FreeMcBoot package preflight from USB.
- Known-good Sony ROM X memory-card stack retained for ordinary card I/O.
- Normal card environment rebuilt after every isolated MagicGate attempt.
Hardware validation
| Card | Filesystem | MagicGate |
|---|---|---|
| Sony 8 MB #1 | PASS | FUNCTIONAL |
| Sony 8 MB #2 | PASS | FUNCTIONAL |
| Third-party 64 MB with functional MagicGate | PASS | FUNCTIONAL |
| Third-party 64 MB without functional MagicGate | PASS | NOT SUPPORTED / NO CARD AUTH ACK |
The PS2SDK 2.0 SECRMAN 1.4 backend reproduced both the positive and negative controls used during development. The probe therefore detects functional CardAuth/KELF behavior rather than manufacturer, capacity, or a printed MagicGate logo.
Important implementation fix
libmc identifies memory cards as logical ports 0 and 1, while SECRMAN CardAuth consumes physical SIO2 channel numbers. Memory cards use channels 2 and 3.
Briscoe keeps ordinary libmc traffic on 0/1 and translates only SECR RPCs carrying a card port:
mc0 logical 0 -> SIO2 2
mc1 logical 1 -> SIO2 3
This was the root cause of the earlier repeatable stat6c=0001D100 / id=FF / st=FF failures on known-good cards.
Negative-control behavior
The known non-MagicGate 64 MB card reaches Mechacon preparation but does not ACK the first real CardAuth command:
pre=1/1
command=0x50
tr=1
stat6c=0001D100
id=FF
st=FF
It is reported as:
NOT SUPPORTED / NO CARD AUTH ACK
Safety model
- Ordinary filesystem testing uses a temporary 4 KiB file and verifies cleanup.
- MagicGate/KELF probing is RAM-only.
- The user-supplied FreeMcBoot package is scanned read-only.
- Formatting remains explicit and requires a second destructive confirmation chord.
- FreeMcBoot installation writes are not enabled in 0.2.0.
The next development milestone is a controlled bind -> write -> reopen -> read-back -> verify -> rollback transaction before any general installer mode is enabled.
Build provenance
Release source commit:
35fde3a8a7dd18c892cf4b1dc36b0f29cd1f5a43
Pinned PS2SDK security source:
a13b5971ec0e39c7ba8b8559b80a4e81c8425352
Release ELF SHA-256:
7cce84e8e9c354323da872b7e714e2f935c2090ee14db11612e2df080625f0a0 MC_INSPECTOR.ELF
Release ZIP SHA-256:
304e882beefb6abb45bc9caed89ca6f6fed598967834569a3ea31d61f76bbd8d PS2-Memory-Card-Inspector-0.2.0-Briscoe.zip
The release package includes the project MIT license, credits, third-party notices, PS2SDK AFL-2.0 license text, source provenance, release notes, and SHA-256 checksum.