Repository navigation
Releases
v0.1.8
Install: download one zip, unzip it, close LED-Next, LaunchBox and BigBox, then double-click Install LED-Next.cmd. It installs to D:\LED-Next (or C:\LED-Next) and keeps your settings when updating.
LED-Next-*-win-x64.zip: small, needs the .NET 8 Desktop Runtime (x64).LED-Next-*-win-x64-self-contained.zip: bigger, needs nothing else.LED-Next-LaunchBox-plugin-*.zip(for LaunchBox/BigBox, added after the build): unzip it into the same folder before running the installer.
PacLED64 boards also need Ultimarc's PacDrive64.dll in the install folder (from Ultimarc's PacDrive SDK).
Full Changelog: v0.1.7...v0.1.8
v0.1.7
What's new in 0.1.7
Light shows (new Animations tab; all off until you turn them on)
- Idle animation: after the controls haven't been touched for a set time, the panel plays one of ten animations (rainbow wave, comet, twinkle, player colours, scanner, ripple, fire, rain…) or a random one with cross-fades. Any button, key, joystick, gamepad, mouse or trackball ends it, and the selected game lights again. It never runs during a game. BigBox's own attract mode doesn't end it.
- Follow the sound: during the idle animation the lights pulse with whatever is playing on the PC (LED-Next only reads Windows' level meter; nothing is recorded). Two animations react to the sound themselves: Sound meter and Beat flash.
- Start-up and shut-down animations when BigBox (optionally LaunchBox) starts and closes.
- "Try" buttons play each animation on the panel.
Known lamps (new Lamps tab): every lamp output a game sends (lamps, LEDs, recoil…) is saved per emulator and game, with what it lit. "Not mapped only" shows the ones that light nothing yet.
All of it was tested on a real 4-player cabinet with BigBox, including a fix made there: the idle animation no longer stops and restarts every few seconds by itself.
Your settings and game library upgrade themselves on the first start.
Install
- Download
LED-Next-0.1.7-win-x64.zip(needs the .NET 8 Desktop Runtime, x64) orLED-Next-0.1.7-win-x64-self-contained.zip(bigger, needs nothing else). - For LaunchBox/BigBox, also download
LED-Next-LaunchBox-plugin-0.1.7.zipand unzip it into the same folder. - Close LED-Next, LaunchBox and BigBox, then double-click
Install LED-Next.cmd. It installs toD:\LED-Next(orC:\LED-Next), finds LaunchBox on any drive, and keeps your settings when updating.
PacLED64 boards also need Ultimarc's PacDrive64.dll in the install folder (from Ultimarc's PacDrive SDK). See the README for details.
Full Changelog: v0.1.6...v0.1.7
v0.1.6
What's new in 0.1.6
- The installer finds LaunchBox on any drive. It used to assume
D:\LaunchBox, so a LaunchBox elsewhere got no plugin. Now it looks at LaunchBox's Desktop and Start menu shortcuts, thenX:\LaunchBoxandX:\<folder>\LaunchBoxon every drive. If it still can't find it, it asks for the folder (press Enter to skip the plugin).-LaunchBox <folder>still works and skips the search.
No changes to the app itself since 0.1.5; see 0.1.5 for the MAME fallback for arcade platforms and the Supermodel / TeknoParrot lamp fix.
Install
Download one zip, unzip it, close LED-Next, LaunchBox and BigBox, then double-click Install LED-Next.cmd. It installs to D:\LED-Next (or C:\LED-Next) and keeps your settings when updating.
LED-Next-*-win-x64.zip: small, needs the .NET 8 Desktop Runtime (x64).LED-Next-*-win-x64-self-contained.zip: bigger, needs nothing else.LED-Next-LaunchBox-plugin-*.zip(for LaunchBox/BigBox): unzip it into the same folder before running the installer.
PacLED64 boards also need Ultimarc's PacDrive64.dll in the install folder (from Ultimarc's PacDrive SDK).
Full Changelog: v0.1.5...v0.1.6
v0.1.5
What's new in 0.1.5
- MAME fallback for arcade platforms. On a platform whose games are MAME rom names (Sega Naomi, Atomiswave, Model 1/2/3, Hikaru, System SP, Casino Arcade…), a game LEDBlinky didn't set up now gets a copy of MAME's lights for the same rom instead of a blank or generic platform default. Games you've edited are left alone. On the test cabinet: 382 games, e.g. Crazy Taxi (Naomi). Changes what the LEDs show: Model 2/3 games without lights used to light every button white.
- Supermodel and TeknoParrot (Output Blaster) lamps fixed. Their output names came through with stray bytes ("LampStart ÍÍ"), so no lamp matched. Now Scud Race Plus and Operation G.H.O.S.T. light their Start buttons.
- Tested on a real cabinet: start lamps from Keisho (Daytona USA), Odin (Brave Firefighters), Supermodel and TeknoParrot; MAME unchanged; the reworked PacLED64 driver from 0.1.4 works as before.
Since 0.1.2
- 0.1.4: I-PAC Ultimate I/O support (untested on a real board, testers wanted) and adding/removing boards in the Boards tab.
- 0.1.3: lamps from more emulators, told apart by their process (Odin, Keisho, TeknoParrot, Supermodel, Model 2), with built-in start lamps. Games without button labels say their name when speech is on.
Install
Download one zip, unzip it, close LED-Next, LaunchBox and BigBox, then double-click Install LED-Next.cmd. It installs to D:\LED-Next (or C:\LED-Next) and keeps your settings when updating.
LED-Next-*-win-x64.zip: small, needs the .NET 8 Desktop Runtime (x64).LED-Next-*-win-x64-self-contained.zip: bigger, needs nothing else.LED-Next-LaunchBox-plugin-*.zip(for LaunchBox/BigBox): unzip it into the same folder before running the installer.
PacLED64 boards also need Ultimarc's PacDrive64.dll in the install folder (from Ultimarc's PacDrive SDK).
Full Changelog: v0.1.4...v0.1.5
v0.1.4
Install: download one zip, unzip it, close LED-Next, LaunchBox and BigBox, then double-click Install LED-Next.cmd. It installs to D:\LED-Next (or C:\LED-Next) and keeps your settings when updating.
LED-Next-*-win-x64.zip: small, needs the .NET 8 Desktop Runtime (x64).LED-Next-*-win-x64-self-contained.zip: bigger, needs nothing else.LED-Next-LaunchBox-plugin-*.zip(for LaunchBox/BigBox, added after the build): unzip it into the same folder before running the installer.
PacLED64 boards also need Ultimarc's PacDrive64.dll in the install folder (from Ultimarc's PacDrive SDK).
Full Changelog: v0.1.3...v0.1.4
v0.1.3
Install: download one zip, unzip it, close LED-Next, LaunchBox and BigBox, then double-click Install LED-Next.cmd. It installs to D:\LED-Next (or C:\LED-Next) and keeps your settings when updating.
LED-Next-*-win-x64.zip: small, needs the .NET 8 Desktop Runtime (x64).LED-Next-*-win-x64-self-contained.zip: bigger, needs nothing else.LED-Next-LaunchBox-plugin-*.zip(for LaunchBox/BigBox, added after the build): unzip it into the same folder before running the installer.
PacLED64 boards also need Ultimarc's PacDrive64.dll in the install folder (from Ultimarc's PacDrive SDK).
Full Changelog: v0.1.2...v0.1.3
v0.1.2
Install: download one zip, unzip it, close LED-Next, LaunchBox and BigBox, then double-click Install LED-Next.cmd. It installs to D:\LED-Next (or C:\LED-Next) and keeps your settings when updating.
LED-Next-*-win-x64.zip: small, needs the .NET 8 Desktop Runtime (x64).LED-Next-*-win-x64-self-contained.zip: bigger, needs nothing else.LED-Next-LaunchBox-plugin-*.zip(for LaunchBox/BigBox, added after the build): unzip it into the same folder before running the installer.
PacLED64 boards also need Ultimarc's PacDrive64.dll in the install folder (from Ultimarc's PacDrive SDK).
Full Changelog: v0.1.1...v0.1.2
v0.1.1
Install: download one zip, unzip it, close LED-Next, LaunchBox and BigBox, then double-click Install LED-Next.cmd. It installs to D:\LED-Next (or C:\LED-Next) and keeps your settings when updating.
LED-Next-*-win-x64.zip: small, needs the .NET 8 Desktop Runtime (x64).LED-Next-*-win-x64-self-contained.zip: bigger, needs nothing else.LED-Next-LaunchBox-plugin-*.zip(for LaunchBox/BigBox, added after the build): unzip it into the same folder before running the installer.
PacLED64 boards also need Ultimarc's PacDrive64.dll in the install folder (from Ultimarc's PacDrive SDK).
Full Changelog: v0.1.0...v0.1.1
v0.1.0
Install: download one zip, unzip it, close LED-Next, LaunchBox and BigBox, then double-click Install LED-Next.cmd. It installs to D:\LED-Next (or C:\LED-Next) and keeps your settings when updating.
LED-Next-*-win-x64.zip: small, needs the .NET 8 Desktop Runtime (x64).LED-Next-*-win-x64-self-contained.zip: bigger, needs nothing else.LED-Next-LaunchBox-plugin-*.zip(for LaunchBox/BigBox, added after the build): unzip it into the same folder before running the installer.
PacLED64 boards also need Ultimarc's PacDrive64.dll in the install folder (from Ultimarc's PacDrive SDK).
Full Changelog: https://github.com/QROACHATHOME/LED-Next/commits/v0.1.0