Skip to content

RemoteFM1 0.3.6

Latest

Choose a tag to compare

@github-actions github-actions released this 09 Nov 05:03
· 13 commits to main since this release

Released 2026-11-08, built and signed on GitHub with tools/hub_build.sh 0.3.6 (docs/RELEASING.md). It replaces 0.3.5.
Both packages install as FM-1_52000306.

Package sha256
remote-0.3.6.fwsc, USB + Bluetooth MIDI (the default) 5c712b1402a31a33b2c3227f771a5603a0facf8162933e699c5d29f1c762017e
remote-usb-0.3.6.fwsc, USB only 9a3ace505de2cfcc67cec3f300040315e63b0cfd16eab5cb79fc1c8e07606cf2

What changed from 0.3.5

  • Sound over Bluetooth, off by default. Bluetooth has room for the screen or the sound, not both. With the
    player's Settings > Use my FM-1 > Sound on the FM-1 over Bluetooth on, a session over Bluetooth plays the
    firmware's sound through the FM-1's own speaker and headphones (MASTER is its volume) and stops sending the screen;
    the FM-1 shows "RemoteFM1" in its own pixel font meanwhile. The keys, knobs, LEDs and the TRS MIDI in work as
    always. Turn it off and the screen comes back.
    • What it sounds like: mono, with the treble cut off around 10 kHz and a little hiss on quiet passages and
      pure tones (about early-'90s sampler quality). Good for playing and listening, not for judging a mix.
    • Delay: about a fifth of a second (150-200 ms) from pressing a key to hearing it, mostly a safety buffer
      against Bluetooth hiccups. A hiccup longer than that fades the sound out for a moment.
    • It uses about 14 KB/s, well inside what the FM-1's Bluetooth carries with a Mac. It was tried with a Mac;
      Windows and Android Bluetooth MIDI may be too slow for it.
    • Over USB nothing changes: the FM-1 is a sound output there, as before. The iOS and Android apps and FM1VST
      don't offer it yet.
  • Your cartridges, loops and settings stay.

remote-0.3.6.fwsc is the package with USB and Bluetooth MIDI (the one The Firmware Hub lists), remote-usb-0.3.6.fwsc the USB-only one; SHA256SUMS lists both. GitHub built and signed each file from this tag's source (The Firmware Hub's shared workflow); check one with gh attestation verify remote-0.3.6.fwsc --repo Quixotic7/RemoteFM1 --signer-workflow zvenson/fm1-build/.github/workflows/build.yml. The build downloads Yamaha's DX7 ROM cartridges and checks them against the sha256s pinned in tools/hub_build.sh; they are compiled in, never in the repository or the release. LICENSE, LICENSING.md and LICENSES.zip carry every licence. Installing firmware is at your own risk.