Repository navigation
EVILGENIUS 0.1.3
- Projects keep their names again. Since the five rooms came in, the unit could not read a project's header back
(at power-on, at a project load): the project lost its name, and the settings kept there (the tracks' level, pan,
sends, room sends and names) were not read from it either. The headers were written right all along, so what a
project last saved is read again now. - The manager is a full-screen app now, loading as a program on a C64 would. F1..F6 (or ALT + 1..6) switch
between HOME, LIBRARY, SOUND, SEQUENCE, MIX and CABINET, and ? lists every key. HOME shows the SID-chip brain, the
picked track's sound as the chip's three voices and the open pattern's six tracks. SOUND draws each section as the
unit does: the waves, the envelopes, the filter's curve, the LFOs. MIX changes each track's pan, delay, reverb and
chorus live. - The manager edits the sequence (with this firmware): SEQUENCE is a piano roll of the open pattern, with
velocity, any parameter lock, the sound lock, chance and condition in lanes below it, every field of a step, the
track's settings, copy and paste, and undo on the unit. PATTERNS shows the project's 64 patterns; click one to go
there. - The manager fits the window and works from the keyboard. Every screen shows all of itself without scrolling,
from 1024 x 768 up: SOUND shows the unit's pages one at a time (1..9), LIBRARY is a list with the picked sound
beside it. Every action has a key (? lists them; the status line shows the screen's main ones). PLAY / STOP and
REC are in the top bar (SPACE, SHIFT + SPACE), with the pattern and its tempo; they press the unit's own buttons. - SEQUENCE in three views: TRACKS (the six tracks a row each, lined up in time, scroll and zoom), STEPS (the
track's eight pages of big steps, each page's [ ] start and end dragged, a keyboard under them for the steps'
notes and chords) and PIANO ROLL (scroll and zoom in pitch and time, three lanes of any value). In all three a
click picks a step (CMD / CTRL adds, SHIFT a run), a double-click or ALT + click makes or takes one away, and a
drag up or down changes the EDIT mode's value: NOTE, VEL, LEN, MICRO, RATCH, CHANCE, COND, FUNC, SOUND or any of
three locks. Steps show their note or chord name; the track's RATE is in the toolbar. - The manager's POOL, PROJECTS and CABINET (F6, F7, F8). POOL shows the project's 128 pool places: put a sound
in a place, CLEAR, MOVE (the steps follow), USED BY, SORT BY TAG and CLEAR UNUSED. PROJECTS: LOAD, NEW, RENAME, COPY
TO, MOVE TO and DELETE a project, and which of its 64 patterns hold steps. CABINET shows the store in use, keeps your
last 12 backups in the browser to restore or save again, saves PRESETS ONLY, and imports sounds one by one into MY
PRESETS, the pool or a track, without rewriting the store. LIBRARY says who uses a preset (USED BY). - Undo works after a full lock pool is cleared on the Bluetooth firmware; every edit after it had no undo before.
- The virtual FM-1: the manager runs EVILGENIUS itself, no FM-1 needed. VIRTUAL (top bar) starts the Bluetooth
firmware in the browser: it plays through the computer, HOME shows its screen, every page works on it as on the
unit, and what you make on it is still there next time you open the page. - Projects kept in the browser, as many as you like (PROJECTS, IN THIS BROWSER). SAVE HERE copies a slot's
project, with the MY PRESETS it uses, into the browser; SEND TO SLOT puts one onto a slot of the FM-1 or the
virtual one, replacing what is there: the store is backed up to CABINET first, and the project's sounds are added
to MY PRESETS where they are missing. EXPORT and IMPORT share them as .egprj files. CABINET now keeps the last 12
backups of each FM-1, so the virtual one's never push out your unit's. - The FM-1 in the browser has its panel, and the manager works with no network. THE FM-1 (ALT + F, or a
click on its screen) shows its front: the screen at twice its size, the knobs, the buttons and the keys with
their lights, all played from the computer's keyboard (the key is written on each control; SHIFT holds one
down), with what each one does right now written on it. The manager and its FM-1 are kept in the browser once
opened, so they open again offline. The FM-1's screen on HOME has its right colours now. - The manager is an FM-1 in your browser now. It starts with the page, with no FM-1 needed and nothing to
connect or read: every screen shows the FM-1 in the browser and follows it. CONNECT FM-1 brings your unit beside
it: PROJECTS shows its slots, GET takes a project from it into the library, SEND puts one onto it, and WORK ON
FM-1 (ALT + W) puts the screens on the unit as before. - An FM-1 running RemoteFM1 can be the browser FM-1's panel: CONNECT finds it, and its keys, knobs, buttons,
lights and screen are the browser's FM-1's. - REMOTE MODE: your FM-1 plays the FM-1 in the browser. With the manager connected, REMOTE MODE (ALT + P)
makes the unit the browser FM-1's panel: its keys, buttons and knobs play it, its lights show it, and the unit
itself is silent and shows REMOTE MODE until you end it. A small FM-1 sits above the manager the whole time,
drawn as the unit is laid out, its screen live and every knob, button and key labelled with what it does right
now (drag its corner for its size). The unit and the manager move as one: the unit's pages open the manager's screens (the
sequencer SEQUENCE, MIX MIX, EDIT SOUND on the page you picked with the black keys), a screen picked in the
manager takes the unit there, and a page the manager has no screen for yet (EFFECTS, the settings) opens THE
FM-1 (ALT + F): the unit's page with every control's job on it. - MIDI FX and TOOLS in the manager (F9, F10; on the FM-1 in the browser). MIDI FX shows a group's whole chain:
the eight slots, the picked slot's every value on every page, the ARP's two lanes, and which group each track
goes through; drag or scroll a value. TOOLS runs the unit's own tools (ROTATE .. CLIP) with the page's steps
shown before and after, KEEP and UNDO. Both are the unit's own state: turn a knob on the unit and they follow. - The manager and its FM-1 move together. Pick a screen, SEQUENCE's EDIT mode, a track or SOUND's page with
the mouse and the FM-1 in the browser goes there; change it on the FM-1 and the manager follows. MIDI FX and
TOOLS have moving pictures: the notes going through the chain, the page's steps round a wheel before and after. - MIX is a mixing desk (on the FM-1 in the browser): six strips drawn as the unit draws them, with the fader,
the pan knob, the three sends, the five rooms, mute and solo, a light while a track sounds and the output's
meters. LEVEL, DRY and the rooms' sends can be set here now. SOUND's pictures move: the wave runs, a note
travels the envelopes, the LFOs run at their speed. - EFFECTS, PATTERNS and SETTINGS have screens of their own (ALT + E, T, S; on the FM-1 in the browser).
EFFECTS is the unit's FX tower: the nine floors with the lift riding to the page shown, the effect's picture
moving (the echo's repeats, the room answering, the chorus drifting, the crush's steps, the glitch repeating) and
its four values. PATTERNS shows all 64 patterns: click one to queue it (SHIFT: at once), drag it onto another to
copy it, X is the FM-1's F2 on it (a cut); the playing one beats with the tempo and the queued one blinks while the line runs out.
SETTINGS has the record settings, the settings and the track settings, each row with its own moving picture.
Each opens its page on the FM-1, and the FM-1's knobs move it. - The manager shows what plays. SEQUENCE lights the step playing (a line in TRACKS and the PIANO ROLL); HOME
lights each track's step and runs the chip's voices; POOL lights the sounds the tracks play; PROJECTS says which
pattern plays; LIBRARY shows the picked sound moving; SOUND marks the values the FM-1's knobs turn now. - The screens' keys stay on one row down to 1024 pixels wide, and SEQUENCE no longer runs under its keyboard
when the FM-1 is docked above it. - SEQUENCE edits TRIG and SLIDE (the trig's kind: NOTE, LOCK or TIE; the slide's time), so every hold mode
of the unit has its EDIT mode in the manager. TOOLS draws LENGTH and STRETCH before and after.
Install it from the browser (Chrome or Edge, USB): https://quixotic7.github.io/evilgenius/install/?v=0.1.3
evilgenius-0.1.3.fwsc carries EvilGenius's data, so it installs completely from EvilGenius's page, from The Firmware Hub or from a terminal (fm1_install.py). It uses the flash at 0x97000..0xAEFFF, where other firmwares keep their projects and samples: back those up first. The .bin files are the data on its own (firmware/tools/fizz_xdata.py push); an install does not need them.
Feedback: https://github.com/Quixotic7/evilgenius/issues
SHA256SUMS lists the package, evilgenius-0.1.3.fwsc, and its two data files. GitHub built and signed each file from this tag's source (The Firmware Hub's shared workflow); check one with gh attestation verify evilgenius-0.1.3.fwsc --repo Quixotic7/evilgenius --signer-workflow zvenson/fm1-build/.github/workflows/build.yml. The packages hold three JieLi AC79 SDK files (Apache-2.0), the Bluetooth one JieLi's Bluetooth libraries too; LICENSE, LICENSING.md and LICENSES.zip carry every licence. Installing firmware is at your own risk.
evilgenius-0.1.3.rfm1 is the same firmware for RemoteFM1 (the app, the site and FM1VST), built from this tag on GitHub without the hub's signature; RemoteFM1 picks it up at its next nightly sync.