LXRE_MX v1.1.1

LXRE_MX v1.1.1 — quick update

Unofficial custom firmware for the Erica Synths LXR-DRUM Eurorack module.
Not made, approved or supported by Erica Synths; install at your own risk.

For the Eurorack module only — not for the desktop LXR.

What's new in v1.1.1

• Minor fixes. Stereo placement from GLT no longer sticks when you switch to CLS or EXP; pans you set by hand stay as they are.

Features

• Kit generator (SHIFT+PERF): new kit on every DRUM press, per-voice recipes, automatic level balancing. Hold voice buttons + DRUM to regenerate only those voices.
• Three generator types: CLS (classic), EXP (experimental) and GLT: glitch and microsound kits, from clean sine ticks and clicks to dirty digital sounds. With MOD on, GLT places the micro sounds left and right.
• Voices to the FX bus: hold SHIFT+FX and press voice buttons.
• DJ filter (DJf) on the FX bus: low-pass left, bypass centre, high-pass right; 12/24 dB, resonance.
• Click-free kit morphing, CPU load in CONFIG, fixes for minor issues in the original firmware.

Install

1. Copy LXRE_MX_v1.1.1.img to the root of a FAT32 SD card (remove older LXRE*.img files).
2. Power off, insert the card, hold the encoder button and power on until "LXR Updater" appears.
3. Wait for "Update OK!". The boot screen shows "LXRE_MX v1.1.1".

Full details in LXRE_MX_v1.1.1_Manual_EN.pdf.

LXRE_MX v1.1

LXRE_MX v1.1

Unofficial custom firmware for the Erica Synths LXR Eurorack module (LXR-02). Not made, approved or supported by Erica Synths; install at your own risk. For the Eurorack module only — not for the desktop LXR.

What's new in v1.1

• GLT — a new kit generator type (TYP: CLS / EXP / GLT): glitch and microsound kits, from clean sine ticks and clicks to dirty digital sounds. 17 recipes: sine tick, digital kick, 808 sub, sine blip, FM pop, modem chirp, blaster / laser, 50 Hz jack hum, filter sweep, reverse swell, click, zap, crushed noise, stutter, digital metal, micro hiss, test tone.
• Stereo in GLT: with MOD on the micro sounds are placed left and right, kick / sub / hum stay in the middle.
• Fixes for minor issues in the original firmware.
• Everything from v1.0 works as before (CLS and EXP generate exactly the same kits).

Also in LXRE_MX (since v1.0)

• Kit generator (SHIFT+PERF): new kit on every DRUM press, per-voice recipes, automatic level balancing. Hold voice buttons + DRUM to regenerate only those voices.
• Voices to the FX bus: hold SHIFT+FX and press voice buttons.
• DJ filter (DJf) on the FX bus: low-pass left, bypass centre, high-pass right; 12/24 dB, resonance.
• Click-free kit morphing.
• CPU load in CONFIG.
• Bug fixes in the original firmware.

Install

1. Copy LXRE_MX_v1.1.img to the root of a FAT32 SD card (remove older LXRE*.img files).
2. Power off, insert the card, hold the encoder button and power on until "LXR Updater" appears.
3. Wait for "Update OK!". The boot screen shows "LXRE_MX v1.1".

Full details in LXRE_MX_v1.1_Manual_EN.pdf.

LXRE_MX v1.0

First release of LXRE_MX — unofficial custom firmware for the Erica Synths LXR Eurorack module (LXR-02). Not made, approved or supported by Erica Synths; install at your own risk.

What's new

• Kit generator (SHIFT+PERF): new kit on every DRUM press, per-voice recipes, automatic level balancing. Hold voice buttons + DRUM to regenerate only those voices.
• Voices to the FX bus: hold SHIFT+FX and press voice buttons.
• DJ filter (DJf) on the FX bus: low-pass left, bypass centre, high-pass right; 12/24 dB, resonance.
• Click-free kit morphing.
• CPU load in CONFIG.
• Bug fixes in the original firmware.

Install

1. Copy LXRE_MX_v1.0.img to the root of a FAT32 SD card (remove older LXRE*.img files).
2. Power off, insert the card, hold the encoder button and power on until "LXR Updater" appears.
3. Wait for "Update OK!". The boot screen shows "LXRE_MX v1.0".

Full details in LXRE_MX_v1.0_Manual_EN.pdf.