Skip to content

Releases

FFXtreme v2.0

Choose a tag to compare

@Fbeen Fbeen released this 26 Oct 21:13

Much improved firmware for the Atari ST: a rock-steady OSD, reliable keyboard control, and TOS/boot/sound choices that survive a power cycle.

Upgrading from v1.9: your OSD settings are reset to the factory defaults on the first start (the configuration layout changed). Note your H.Off/V.Off values before you upgrade.

Downloads

  • FFXtreme-v2.0.hex / FFXtreme-v2.0.bin: flash with a USB-serial adapter (BOOT0 = 1, e.g. stm32flash -w FFXtreme-v2.0.hex -v /dev/ttyUSB0) or an ST-Link. Flashing over the Blue Pill's micro-USB is not possible.

Changes

  • Fixed: the OSD jumped vertically on the Atari ST. The HSYNC interrupt now samples VSYNC itself, instead of racing a separate VSYNC interrupt.
  • New: separate vertical offset for 60 Hz colour ("60Hz V.Off").
  • New: clean restart when switching between colour and monochrome.
  • Keyboard: received by interrupt into a buffer (no lost bytes); mouse and joystick packets are skipped, so they cannot trigger hotkeys; keys no longer get stuck; hotkeys need both Ctrl and Alt; clean recovery if bytes are lost.
  • TOS (Ctrl+Alt+F1–F4), boot drive (Ctrl+Alt+B) and sound (Ctrl+Alt+S) are saved, so they survive a power cycle. EmuTOS, which needs a cold start, now just works.
  • Ctrl+Alt+Delete resets the Atari ST instead of the OSD controller.
  • OSD menu: Ctrl+Alt+Undo leaves it without saving; it closes by itself after one minute without key presses.
  • Fixed: every settings save restarted the OSD controller (the Flash write never terminated and the watchdog reset the chip).
  • Fixed: the mono/stereo messages were swapped and could show the old state.
  • The TOS and sound select lines are driven actively (they were weak pulls).
  • PB8/PB9 (unused Gotek button lines) are no longer driven low.
  • Updated factory default H.Off/V.Off.
  • Builds with GCC 12 and newer.

Recommended FF.CFG settings

display-off-secs = 5
osd-display-order = 0d,1

The first makes the OSD disappear after 5 seconds; the second removes an empty row above the image name. See the README for details.

Xtreme v1.9

Xtreme v1.9 Pre-release
Pre-release

Choose a tag to compare

@Fbeen Fbeen released this 11 Dec 15:29
c293716

First version for Atari ST firmware for FF_OSD