We use voxl-uvc-server to get video frames in the MPA pipeline and [voxl-streamer] to stream over VLC or QGC.
inside voxl
lsusb to get ID 1d6c:0103
lsusb
ID 1d6c:0103
then lsusb -v -d 1d6c:0103 to get the vendor id in hexadecimal. then
lsusb -v -d 1d6c:0103
rb5: voxl-uvc-server -d -v 0x1d6c Enabling debug messages voxl-uvc-server starting Image resolution 640x480, 30 fps chosen Vendor ID 0x1d6c chosen UVC initialized Device 1d6c:0000 found Device opened uvc_get_stream_ctrl_format_size succeeded for format YUYV Streaming starting Got frame callback! frame_format = 3, width = 640, height = 480, length = 617448, ptr = (nil) * got image 30 * got image 60
if running properly, we should have uvc added to the directory rb5:/run/mpa/.
uvc
rb5:/run/mpa/
For streaming
then in a new terminal run
rb5: voxl-configure-streamer -i uvc rb5: sudo systemctl start voxl-streamer rb5: sudo systemctl enable voxl-streamer
finally, set up the RTSP URL in VLC or QGC as described here. Also, bitrate can be setup.
Camera Calibration
There was an error while loading. Please reload this page.