Skip to content

Releases

RoomCircuit 0.9.1

Choose a tag to compare

@SEc-123 SEc-123 released this 16 Nov 10:35
  • Switch hosting servers from the overlay.
  • Support Ultrahand themes, right-side layout and sound.
  • Move settings to /config/RoomCircuit/ and preserve existing data.

Update in RoomCircuit, then follow the restart prompts.

RoomCircuit 0.9.0

Choose a tag to compare

@SEc-123 SEc-123 released this 16 Nov 07:40
  • Add configurable LAN Play nodes and remember the selected hosting node.
  • Show hosting and room nodes in the overlay.
  • Move RoomCircuit files to their own folder and preserve existing settings.

Update in RoomCircuit, then restart Atmosphère. For a first install, copy the SD ZIP contents to the SD card root.

RoomCircuit 0.8.9

Choose a tag to compare

@SEc-123 SEc-123 released this 16 Nov 01:16
  • Restore in-game Local Wireless search and room setup.
  • Improve node-selection error handling.
  • Use OLED black by default.

Update in RoomCircuit, then restart Atmosphère. For a first install or an older updater that cannot install, extract the full SD ZIP to the SD card root.

RoomCircuit 0.8.8

Choose a tag to compare

@SEc-123 SEc-123 released this 15 Nov 09:25

English

  • Show the game name and mark your own room on supported direct LAN Play nodes.
  • Share or hide your game password once the lobby verifies your room.
  • Clarify that new Local Wireless rooms use the selected hosting node.
  • Fix the updater’s SD card path and show download and installation progress separately.
  • Show the installed version and highlight the update button when a newer version is available.

Update in RoomCircuit and restart Atmosphère. For a first install or if the old updater cannot install, extract the full SD ZIP to the SD card root.

中文

  • 支持在适配的 LAN Play 直连节点显示游戏名并标出「我的房间」。
  • 大厅确认房间后,可分享或隐藏游戏内密码。
  • 教程明确说明新建的本地无线房间使用当前建房线路。
  • 修复更新器的 SD 卡路径,并分开显示下载与安装进度。
  • 标题旁显示当前版本,发现新版时高亮更新按钮。

在 RoomCircuit 内更新后重启虚拟系统。首次安装或旧版更新器无法安装时,将完整 SD ZIP 解压到 SD 卡根目录。

RoomCircuit 0.8.6 (Beta)

Choose a tag to compare

@SEc-123 SEc-123 released this 15 Nov 05:58

RoomCircuit, formerly LANywhere Self-host, helps players find rooms, test nodes, and schedule sessions for Switch Local Wireless games over the internet.

English

  • Renamed the app and overlay to RoomCircuit and added the three-console icon.
  • Redesigned the lobby as a game list beside a room table.
  • Showed plain game names and made long focused titles scroll.
  • Expanded the node picker with regions, measured latency, and clear availability.
  • Grouped appointments by game and kept scheduled times in the console's local time.
  • Used the Switch name automatically and removed manual nicknames from the lobby.
  • Fixed freezing when selecting hostname-based public nodes.
  • Improved network startup, room scanning, and disconnect cleanup.
  • Fixed connected UDP behavior and bounded queued traffic.
  • Fixed overlay focus, font memory use, and Chinese glyph fallback.
  • Fixed update delivery after the monthly traffic allowance resets.
  • Improved appointment storage and interrupted backup recovery.
  • Clarified errors for keyboard input, language saving, and room actions.

Update in the app or install the SD ZIP, then restart Atmosphère.

中文

  • 应用和浮层更名为 RoomCircuit,换用三台掌机联机图标。
  • 大厅改为左侧选游戏、右侧看房间。
  • 游戏列只显示游戏名,选中长标题会横向滚动。
  • 节点页按地区浏览,显示实测延迟和可用状态。
  • 约局按游戏浏览,并按主机本地时间显示。
  • 自动使用 Switch 主机名称,移除大厅手动昵称。
  • 修复选择使用域名的公共节点时卡死。
  • 改善网络启动、房间扫描和断线清理。
  • 修复 UDP 连接处理,限制待发送数据占用。
  • 修复浮层焦点、字体缓存和中文缺字。
  • 修复月度流量额度恢复后在线更新仍不可用的问题。
  • 改善约局存储及备份恢复中断后的处理。
  • 补全键盘、语言设置和房间操作的失败提示。

在应用内更新或安装 SD 包,然后重启大气层。

LANywhere Self-host 0.8.2 (Beta)

Choose a tag to compare

@SEc-123 SEc-123 released this 15 Nov 01:03

English

Fixes an online launch crash in the Album app. From 0.7.0 onward, checking for updates could abort because the Switch build of the signature library tried to use Unix random devices. 0.8.2 uses the Switch's kernel-seeded generator and still verifies the update signature.

If LANywhere crashes on launch, extract the SD ZIP on a computer, merge only atmosphere/ and switch/ into the card root, and restart Atmosphère. The guide and license notices can stay in the download. Once 0.8.2 runs, future releases can be installed through Update, followed by a restart.

Node tests can now use the network connection initialized by the updater.

中文

修复从相册联网打开 LANywhere 时可能崩溃的问题。0.7.0 起,检查更新时验签库会尝试访问 Switch 上不存在的 Unix 随机设备。0.8.2 改用 Switch 自带的随机数接口,保留更新签名校验。

如果旧版一打开就崩溃,请在电脑解压 SD 包,只把 atmosphere/ 和 switch/ 合并到卡根目录,然后重启虚拟大气层。说明和许可留在下载包即可。之后可在 LANywhere 内点「更新」,安装后重启。

同时修复更新器先初始化网络后,节点测速无法启动的问题。

LANywhere Self-host 0.8.1 (Beta)

Choose a tag to compare

@SEc-123 SEc-123 released this 15 Nov 00:04

English

Play compatible Switch games over the internet using their Local Wireless mode. v0.8.1 adds a fix for saving the LAN Play address across restarts.

  1. Install. Merge the SD ZIP into the SD root or use Update in an installed LANywhere 0.7.0 or newer. Restart Atmosphère and open LANywhere from Album.
  2. Host. Press B for the lobby, then Y for nodes. Press R to filter by region, choose a node using your Switch's measurements, then create a Local Wireless room in the game. Press L in the node picker if you want to test with friends first.
  3. Join. Select the room in the lobby, then join it in the game's Local Wireless menu. For direct rooms, your Switch connects to the host's chosen public node.

Node guide · Test results and remaining hardware checks

中文

通过兼容 Switch 游戏的「本地无线」模式跨网联机。0.8.1 修复重启后 LAN Play 地址无法复用的问题。

  1. 安装。 将 SD 包 解压合并到卡根目录。已安装 0.7.0 或更新版可在应用内点「更新」。重启 Atmosphère 后从相册打开 LANywhere。
  2. 建房。 B 进大厅,Y 看节点测速,R 筛地区。选好节点后回游戏用「本地无线」建房。想先和好友一起测速,可在选节点时按 L。
  3. 加入。 先在大厅选房,然后回游戏从「本地无线」加入。直连房间会连接房主所选的公共节点。

节点指南 · 验证结果与待测项

LANywhere Self-host 0.8.0 (Beta)

Choose a tag to compare

@SEc-123 SEc-123 released this 14 Nov 23:45

English

Choose where to host before opening a public room. Press Y in the lobby to see each node's region and connection measured by your Switch. Pick a node, return to the game and create a local-wireless room. Recommendations use your network; they cannot predict future guests' connections.

The unified lobby still lists rooms across nodes. Filter by game or region, select a room and check your own path before joining its actual node. Native LAN Play transport now supports standard and fork discovery, joining, game UDP and game TCP. A live session keeps its selected node; recovery never silently moves it elsewhere.

Test together is optional: share a temporary code and compare everyone's measurements. No account or additional server is needed. English and Chinese help are included.

Install the matching SD package, or use the in-app updater on 0.7.0 and restart Atmosphère. Host tests, cross-builds and public-node protocol checks are recorded in validation. Physical two-Switch games, network-switch recovery and comparative game latency still require testing; node RTT is not end-to-end game latency.

中文

一个人也能选线路建公共房:大厅按 Y,看节点地区和 Switch 实测连接,选好后回游戏创建本地无线房间。推荐只根据你的网络,不能预知后来加入者的网络。

统一大厅继续汇总各节点房间,可按游戏、地区筛选。选房后检测你到该房间节点的连接,再直接加入。新增标准版和分支版 LAN Play 原生建房、搜索、加入及游戏 UDP/TCP 传输。对局锁定所选节点,断线恢复不会擅自换服。

可选「和好友一起测速」:分享临时码,共同比较线路,无需账号或新增服务器。中英文教程同步更新。

合并同版 SD 包,或在 0.7.0 内在线更新,完成后重启虚拟系统。自动测试、交叉构建与公网协议检查见验证记录。双 Switch 游戏、切网恢复和实际游戏延迟对比仍待实测;节点延迟不等于对局延迟。

LANywhere Self-host 0.7.0 (Beta)

Choose a tag to compare

@SEc-123 SEc-123 released this 14 Nov 21:30

English

LANywhere now checks for updates in the app. Select Update, close the game, then download and install. Restart Atmosphère when prompted.

The updater verifies the release signature and installs the app, background module and overlay together. Settings and appointments are preserved. Interrupted installations can be restored through LANywhere Recovery.

Install this first updater-enabled version using the full SD ZIP. Protocol, signature and interrupted-installation tests passed. Updating and power-loss recovery on a physical Switch still require verification.

中文

新增应用内在线更新。打开应用后检查新版,点「更新」,关闭游戏后下载安装,完成后重启虚拟系统。

更新前校验发布签名,应用、后台和浮层一起安装,保留设置和约局。安装中断时可打开 LANywhere Recovery 恢复。

首次安装这个带更新器的版本仍需合并完整 SD 包。下载协议、签名校验和中断恢复测试通过,实体 Switch 更新与断电恢复仍待实测。

LANywhere Self-host 0.6.2 (Beta)

Choose a tag to compare

@SEc-123 SEc-123 released this 14 Nov 19:21

English

  • Community connections now check that game UDP still receives replies. A broken data path triggers reconnection to the same room, even while the control connection stays online.
  • UDP sends and reconnects now share socket ownership, preventing a send from racing a closed connection.
  • The public room directory has a separate bounded connection slot. A full legacy gateway no longer hides the community hosting option.

Merge the full SD package into the SD root and restart Atmosphère. In the lobby, use Y to choose the hosting line and A to select a room. Cross-network play on two Switch consoles and the latency reported in Issue #2 still need player confirmation.

中文

  • 社区线路会持续检查游戏数据是否收到回应。即使控制连接正常,游戏数据断线也会尝试重连原房间。
  • 同步游戏发送与重连时的套接字使用,避免重连过程中误用已关闭的连接。
  • 为社区目录保留独立查询连接。旧网关连接占满时,社区建房选项仍可正常显示。

将完整 SD 包合并到卡根目录,重启 Atmosphère。大厅按 Y 选择建房线路,按 A 选房。双 Switch 跨网对局及 Issue #2 的地区延迟仍待玩家实测。