Skip to content

Releases

26.11.9

Choose a tag to compare

@SH1FT-W SH1FT-W released this 12 Nov 17:28
  • New: the source sensor names the HDMI input. sensor.jbl_bar_1000_source now shows hdmi_1, hdmi_2 or hdmi_3 (HDMI 1 to HDMI 3) when the bar reports which input is selected. It shows hdmi only when the bar names no input, for example right after choosing HDMI in the source select until the bar answers.
  • Automations that check the sensor for hdmi need the new values. The source select and the media player keep showing hdmi and HDMI, because choosing HDMI there goes to the last used input (#7).

Thanks to @OnktheMonk for the idea and for testing the HDMI buttons.

26.11.8

Choose a tag to compare

@SH1FT-W SH1FT-W released this 12 Nov 16:56

New

  • Next HDMI input: button.<bar>_hdmi, the same ID as in jbl_integration. It sends the remote's HDMI key, which steps through the HDMI inputs. Choosing HDMI as the source always goes to the last used input (#7).
  • HDMI 1, HDMI 2 and HDMI 3: button.<bar>_hdmi_1 to button.<bar>_hdmi_3 switch straight to one input. Disabled by default, because not every bar has three HDMI inputs: enable the ones you need on the device page. The source select and sensor still show every HDMI input as hdmi (#7).

Thanks to @xitters for the report.

26.11.8b1

26.11.8b1 Pre-release
Pre-release

Choose a tag to compare

@SH1FT-W SH1FT-W released this 11 Nov 21:55

Beta: first beta of 26.11.8.

New

  • Next HDMI input: button.<bar>_hdmi, the same ID as in jbl_integration. It sends the remote's HDMI key, which steps through the HDMI inputs. Choosing HDMI as the source always goes to the last used input (#7).
  • HDMI 1, HDMI 2 and HDMI 3: button.<bar>_hdmi_1 to button.<bar>_hdmi_3 switch straight to one input. Disabled by default, because not every bar has three HDMI inputs: enable the ones you need on the device page. The source select and sensor still show every HDMI input as hdmi (#7).

On the test bar only HDMI 1 could be checked so far, feedback on HDMI 2 and HDMI 3 is very welcome.

26.11.7

Choose a tag to compare

@SH1FT-W SH1FT-W released this 10 Nov 07:46

Fixed

  • EQ bands in the wrong order: on the device page the bands from 1 kHz up were listed before 125 Hz. All bands are now named in Hz (EQ 1000 Hz instead of EQ 1 kHz), so Home Assistant lists them from 125 Hz to 8000 Hz. Entity IDs stay the same (#6).

Thanks to @xitters for the report.

26.11.6

Choose a tag to compare

@SH1FT-W SH1FT-W released this 08 Nov 19:33

New

  • Power-on and playback time: sensor.<bar>_power_on_time and sensor.<bar>_playback_time, the bar's own lifetime counters. Only on bars that report them. Confirmed on a BAR 1000 and a BAR 1000 MK2 (#4).

Changed

  • The diagnostics download no longer asks the bar for the extra settings from 26.11.5.
  • The Auracast high quality switch from beta 26.11.6b1 is not part of this release, because the BAR 1000 MK2 did not accept the command (#4).

Thanks to @hadrbrt for testing on the MK2.

26.11.6b1

26.11.6b1 Pre-release
Pre-release

Choose a tag to compare

@SH1FT-W SH1FT-W released this 08 Nov 17:27

Beta: first beta of 26.11.6.

New

  • Power-on and playback time: sensor.<bar>_power_on_time and sensor.<bar>_playback_time, the bar's own lifetime counters. Only on bars that report them.
  • Auracast high quality: switch.<bar>_auracast_quality. Only on bars that report the feature. Built from the JBL One app and untested on a real bar, feedback is very welcome (#4).

Changed

  • The diagnostics download no longer asks the bar for the extra settings from 26.11.5.

26.11.5

Choose a tag to compare

@SH1FT-W SH1FT-W released this 08 Nov 17:24

New

  • Broadcast: select.<bar>_broadcast with off, mono and stereo for detached rear speakers. Only on bars that report the feature, confirmed on a BAR 1000 MK2 (#4).
  • Rear volume: select.<bar>_rear_volume with muted, low, medium and high. Available while the rear speakers are detached, because the bar ignores it while they are docked. Confirmed in both directions on a BAR 1000 and a BAR 1000 MK2 (#4).
  • Deep sleep: switch.<bar>_deep_sleep. Only on bars that report the feature. Not yet tried on a real bar, so please use it only if you are fine with the bar possibly not being reachable from Home Assistant in standby.
  • Play medium: sensor.<bar>_play_medium is back with the same ID as in jbl_integration. It shows what the bar plays, including streams such as AIRPLAY or CAST. Disabled by default, as before. Thanks to @tgechev for the contribution (#5).
  • Diagnostics: the download lists the features the bar reports as supported and asks it once, read-only, for a few settings that have no entity yet.

Thanks to @hadrbrt for testing on the MK2 (#4).

26.11.5b3

26.11.5b3 Pre-release
Pre-release

Choose a tag to compare

@SH1FT-W SH1FT-W released this 08 Nov 16:56

Beta: third beta of 26.11.5. It adds the volume of the detached rear speakers (#4).

New

  • Rear volume: select.<bar>_rear_volume with muted, low, medium and high. It is available while the rear speakers are detached, because the bar ignores it while they are docked and only remembers the last level. The mapping of the levels is not confirmed on a real bar yet.
  • Diagnostics: the download now also asks the bar once, read-only, for a few settings that have no entity yet (usage time, Auracast quality mode, bass level, subwoofer state, smart button). Nothing is changed on the bar.

Still in beta from earlier betas of 26.11.5

  • Broadcast: select.<bar>_broadcast with off, mono and stereo for detached rear speakers (#4). Confirmed on a BAR 1000 MK2.
  • Deep sleep: switch.<bar>_deep_sleep.
  • Play medium: sensor.<bar>_play_medium (#5).

Broadcast and deep sleep only appear on bars that report the feature.

26.11.5b2

26.11.5b2 Pre-release
Pre-release

Choose a tag to compare

@SH1FT-W SH1FT-W released this 08 Nov 15:26

Beta: second beta of 26.11.5. It brings back the play_medium sensor. Thanks to @tgechev for the contribution (#5).

New

  • Play medium: sensor.<bar>_play_medium is back with the same ID as in jbl_integration. It shows what the bar plays, including streams such as AIRPLAY or CAST, which the source sensor and the media player cannot show. Unknown in standby. Disabled by default, as before.

Still in beta from 26.11.5b1

  • Broadcast: select.<bar>_broadcast with off, mono and stereo for detached rear speakers (#4).
  • Deep sleep: switch.<bar>_deep_sleep.
  • Diagnostics: the download now lists the features the bar reports as supported.

Broadcast and deep sleep only appear on bars that report the feature. Feedback from bars that show Broadcast in the JBL One app is very welcome.

26.11.5b1

26.11.5b1 Pre-release
Pre-release

Choose a tag to compare

@SH1FT-W SH1FT-W released this 08 Nov 09:47

Beta: first beta for Broadcast on detached rear speakers. Feedback from bars that show Broadcast in the JBL One app is very welcome.

New

  • Broadcast: select.<bar>_broadcast with off, mono and stereo for detached rear speakers (#4).
  • Deep sleep: switch.<bar>_deep_sleep.
  • Diagnostics: the download now lists the features the bar reports as supported.

Broadcast and deep sleep only appear on bars that report the feature. Both are taken from the JBL One app and have not been tested on a real bar yet. The rear speakers have to be detached for Broadcast.