Skip to content

FT-710 Control 0.9.4 beta

Pre-release
Pre-release

Choose a tag to compare

@SP5XTF SP5XTF released this 08 Nov 08:38
· 1 commit to main since this release

What's new

New modes and tools

  • PSK31 and PSK63 – a new PSK tab: decoder with AFC (catches a few tens of Hz from a click) and a squelch that keeps noise off the screen, click-to-tune spectrum, sending with macros, logging as PSK31/PSK63.
  • Antenna SWR sweep (Window menu, ⌥⌘S) – steps through a band with short low-power carriers (5–10 W) and draws the SWR curve with the minimum marked; hover shows frequency and SWR; saved measurements, comparison (e.g. before/after adjusting the antenna), CSV export. A carrier test checks the setup first. Safety: amateur bands only, stops at SWR > 5, restores frequency, mode, power and tuner.
  • Who hears me (Window menu, ⌥⌘K) – a map of stations that received your signal according to PSKReporter, coloured by band, with the night side and the day/night line (grayline); period 15 min – 24 h, band filter, farthest receiver, receivers on the night side.

Works on a MacBook screen

  • The window now fits a MacBook Air (from 1280 pt): the bottom panel can be resized by dragging and collapsed (double-click or ⌥⌘B), left column boxes collapse with a click on their title, VFO-B shows as one row in a narrow window, tabs that do not fit go into a MORE menu.
  • Tooltips on the radio buttons (AGC, NAR/NOTCH/DNF/CONTOUR, IPO/AMP, ATT, tuner) and on every tab.

Logbook

  • Add manually… (log form on the main tab) and Add QSO… (log window) – QSOs from another radio, e.g. 2 m, 70 cm, 23 cm: band, UTC date, mode (incl. MSK144, Q65), propagation (repeater, satellite, tropo, EME…), radio and power; with a locator they count for VUCC.
  • QRZ/HamQTH data follows call changes – after an incomplete or corrected call the previous station's data is replaced (hand-edited fields stay) – in all log forms and the remote panel.
  • QSOs received from WSJT-X / JTDX are completed with QRZ/HamQTH data.

Program

  • File → Save / Restore program settings – all settings in one file (no passwords, no logbook); the current settings are backed up automatically before a restore.
  • Help → Save diagnostic report… – one file for a bug report (version, macOS, radio, CAT and scope logs, audio, settings – no passwords).
  • Help → CAT log (⌥⌘L) – now a separate window (formerly the LOG CAT tab).
  • The remote operation password is stored in the macOS Keychain (moved automatically on first launch).

Notes

  • Beta: test transmitting into a dummy load first.
  • Not yet signed with an Apple Developer ID – see the README for the first-launch steps.
  • Requirements: macOS 13 or later, Apple Silicon.

SHA-256: cd2f055ccb5ca6591189a46a5e0f1fabe24bee3fc003e8abdeb944af3c1456d8


Co nowego (PL)

Nowe emisje i narzędzia

  • PSK31 i PSK63 – zakładka PSK: dekoder z AFC i blokadą szumu, strojenie kliknięciem, nadawanie z makrami, dziennik.
  • Pomiar SWR anteny (Okno, ⌥⌘S) – krzywa SWR w paśmie na małej mocy, odczyt pod myszą, zapis i porównanie pomiarów, CSV, test nośnej; tylko pasma amatorskie, przerwanie przy SWR > 5, przywrócenie ustawień radia.
  • Kto mnie słyszy (Okno, ⌥⌘K) – mapa odbiorców Twojego sygnału z PSKReporter, z nocą i linią dnia i nocy.

Na ekranie MacBooka

  • Okno od 1280 pt: zmienna wysokość i zwijanie dolnego panelu (⌥⌘B), zwijane ramki lewej kolumny, VFO-B w jednym wierszu, menu WIĘCEJ dla zakładek; podpowiedzi przycisków radia i zakładek.

Dziennik

  • Dodaj ręcznie… i Dodaj QSO… – łączności z innego radia (2 m, 70 cm, 23 cm), z pasmem, datą UTC, propagacją, radiem i mocą.
  • Dane z QRZ/HamQTH podążają za zmianą znaku; łączności z WSJT-X/JTDX uzupełniają się danymi z QRZ.

Program

  • Plik → Zapisz / Przywróć ustawienia programu (bez haseł), Pomoc → Zapisz raport diagnostyczny…, Pomoc → Dziennik CAT (⌥⌘L), hasło pracy zdalnej w pęku kluczy macOS.