Repository navigation
Releases
WorkFlow Skin v0.4.8
Adds Settings → Updates for machine firmware and the Decaid app.
- Shows the installed firmware build, compatible firmware availability, and release notes. Install the recommended firmware or select a firmware file from Decent for a classic DE1 machine.
- Confirms before installation, checks the machine is idle or asleep, shows upload/verification progress, and supports cancellation through Decaid. 100% uploaded is not reported as complete until Decaid confirms machine verification.
- Keeps firmware progress when navigating away from Settings. Machine sleep and the skin auto-sleep timer are disabled during a known firmware operation.
- Shows Decaid's version, app update checks, release notes and download progress. Compatible Android builds can open the system installer; other platforms offer a release link. Refresh status supports reconnecting after Decaid restarts.
- Older or unsupported APIs show an availability message. Unknown firmware versions and incompatible models are not labelled up to date.
Update through the existing app skin updater using Sabotage1/WorkFlow-Skin and the attached workflow-skin.zip. The refill kit fix and per-profile Brew recipes remain included.
Validation: 512 automated tests passed; 62 desktop/tablet browser checks passed, and the six Updates checks passed again on the final build. The production build and ZIP were verified. 66 REST/telemetry route/method contracts passed against Decaid v0.8.8, v0.9.0, v0.9.1 and v0.9.2. Firmware streams and app installations were simulated; no physical machine was flashed and no Decaid app was installed during validation.
WorkFlow Skin v0.4.7
Fixes the refill kit Always on setting being rejected and returning to Automatic when Settings refreshes.
The refill kit choices now match Decaid's supported values: Off (0), Always on (1), and Automatic (2). The previous Always on choice sent unsupported value 3; the option incorrectly labelled Manual sent the actual force-on value. The Manual choice has been removed, and unsupported incoming values fall back to Automatic.
After updating, open Settings → Machine settings, acknowledge the advanced settings caution, select Always on, and press Save machine settings.
Update through the existing app skin updater using Sabotage1/WorkFlow-Skin and the attached workflow-skin.zip. This is a stable release and keeps the per-profile Brew recipes and Atom65 choices from v0.4.6.
Validation: 489 automated skin tests passed, including all three refill modes and saving/reopening Always on. The desktop/tablet browser run passed 55 of 56 checks initially; the remaining R2 check passed on a targeted retry. Production build, ZIP integrity, bundled refill option, and version 0.4.7 manifest were verified. Physical refill kit operation has not been tested.
WorkFlow Skin v0.4.6
Saving a recipe on Brew now remembers dose and yield for the selected profile. Switching profiles, startup selection, and Work Flow brew steps restore that recipe. Older background refreshes cannot overwrite a newly saved dose, fixing the return to an old 18.6 g value.
Profiles now have a Grinder dose editor with three choices: Leave grinder unchanged (default), Use Brew dose, or Use a fixed grind weight. Choices are stored by the Atom65 driver per physical grinder and recipe. Saving a Brew recipe does not opt a profile into grinder syncing.
Install/update the skin using Sabotage1/WorkFlow-Skin and the attached workflow-skin.zip. The new grinder editor also requires Atom65 Profile Sync 0.1.1; install its ZIP update in Decaid. Existing driver choices and pauses are retained. An already working Profile Sync controller needs no firmware change.
Validation: 477 skin tests, 56 desktop/tablet browser checks, 34 driver/native-protocol tests, and a targeted real Decaid QuickJS integration test passed. The skin build, ZIP integrity, and 62 REST/telemetry route/method contracts passed against Decaid v0.8.5, v0.8.6, v0.8.8, v0.9.0-beta.2, v0.9.0, v0.9.1, and v0.9.2. These checks do not establish physical tablet or grinder operation.
WorkFlow Skin v0.4.4
Keeps scale diagnostics in the structured skin logs, matching the R2 behavior introduced in 0.4.3.
Scale scan, connection and tare progress, results and errors no longer appear as page banners. This includes raw HTTP/Bluetooth failures, pending recovery messages and the tare-blocked diagnostic during a shot. The Scale indicator still reports connection state, and the button still connects or tares the scale.
Update through Decaid using Sabotage1/WorkFlow-Skin, asset workflow-skin.zip.
Validation: 150 application regression tests; desktop/tablet browser checks for successful connection/tare, 404/500 failures, host-owned recovery, tare blocking during a shot and sleep/wake behavior; production build and ZIP integrity verification. Physical-tablet validation remains pending.
WorkFlow Skin v0.4.3
Keeps R2 diagnostics out of the Review screen and prevents automatic readings while the R2 is off or disconnected.
- Measurement, discovery and connection messages now go to the existing structured skin logs. Raw HTTP errors, sensor IDs and R2 status messages are no longer shown as banners or inline Review messages.
- Automatic readings require a current, available R2 connection and a registered sensor. A saved sensor ID or stale sensor metadata no longer starts a measurement.
- Disconnecting the R2 cancels a queued automatic reading. Successful measurements still update TDS and EY directly.
Update through Decaid using Sabotage1/WorkFlow-Skin, asset workflow-skin.zip.
Validation: 464 unit/integration tests; 8 desktop/tablet browser checks covering connected readings, an offline R2, a missing-sensor 404 response and sleep/Review behavior; Decaid 0.9.1 API contract checks; production build and ZIP integrity verification. Physical-tablet validation remains pending.
WorkFlow Skin v0.4.2
Fixes automatic post-shot TDS readings and Read from R2 when the DiFluid R2 uses the dedicated difluid-r2.reaplugin driver on Decaid 0.9.0 or 0.9.1.
The skin now starts plugin measurements without the native driver's unsupported timeout parameter, waits for the completed result, and saves the plugin sensor ID after a successful reading. Native R2 support is retained. The update also prevents overlapping automatic/manual tests and preserves automatic readings during the transition to Review.
Install or update through Decaid using Sabotage1/WorkFlow-Skin, asset workflow-skin.zip.
Validation: 458 unit/integration tests; desktop and tablet browser checks for automatic reading, manual reading, TDS/EY saving, and sleep/Review behavior; 62 REST/telemetry contract checks against each of Decaid 0.9.0 and 0.9.1; production build and ZIP integrity verification. Physical R2 and installed-tablet validation remain pending.
WorkFlow Skin v0.4.1
WorkFlow 0.4.1 fixes primary scale recovery on Decaid 0.8.8. Startup, wake, automatic retry and the Scale button now use the app's native scan-and-connect policy, join active native recovery, and observe the primary weight stream. Discovery-only scans no longer compete with the preferred-scale watcher during these connection paths.
- Automatically retries while the skin remains open, including when the preferred scale is absent from inventory.
- Preserves native scan/connection ownership and handles the startup snapshot race.
- Separates primary and auxiliary scale roles; fresh primary telemetry wins over delayed inventory.
- Respects intentional tare lockout, external sleep, brewing and hidden pages.
- Handles pausedSteam/puffing and opts into safe early preferred-scale reconnect on Decaid 0.9.0-beta.2 or later.
- Retains the legacy fallback for older app versions.
Validation: 446 unit/integration tests, 40 desktop/tablet browser checks, four Decaid version contract checks (0.8.5, 0.8.6, 0.8.8, 0.9.0-beta.2), production build and ZIP integrity. Additional repeated startup-race and external-sleep checks passed. Browser checks use a simulated gateway; installed hardware results are tracked separately.
Install workflow-skin.zip using Sabotage1/WorkFlow-Skin in Decaid. Reload the skin after installation so the running page uses the new bundle.
See docs/decaid-0.8.8-scale-recovery-0.4.1.md for compatibility coverage and new-feature opportunities.
Installed-hardware confirmation: on the user's Decaid 0.8.8 tablet, after loading v0.4.1 and power-cycling the Bookoo Mini while leaving WorkFlow open, the native inventory reported the scale connected in the primary role and its WebSocket delivered changing weight readings. Physical brewing/weight stop and R2 measurements were not exercised.
WorkFlow Skin v0.4.0
WorkFlow 0.4.0 synchronizes the skin with machine sleep and wake initiated through Apple Home, Home Assistant, and other controllers using Decaid's native machine state.
- Apple Home sleep automatically opens the screensaver, releases wake lock, and applies the configured dimming level, including when the skin is on Settings or starts with the machine already asleep.
- External wake restores the screen, brightness, idle timer, and configured startup preset. Screen-tap wake remains supported.
- Live machine-state changes and WebView resume trigger fresh REST confirmation. A five-second fallback poll handles missing telemetry.
- No duplicate machine sleep or wake commands are sent for confirmed external transitions. Stale telemetry, missing/disconnected state, and delayed reads from an older cycle cannot override the current sleep/wake state.
- One shared monitor handles both directions and prevents duplicate initial device discovery. Existing Review, scale-free shot completion, and active-brew protections remain covered.
Validated: 419 unit/integration tests, 28 desktop/tablet browser checks, production build, and ZIP integrity/version checks. All 61 REST/telemetry route contracts pass against Decaid 0.8.5 and 0.8.6, with three explicit legacy fallbacks reported separately. Browser tests simulate external machine state changes; the physical Apple Home/Home Assistant setup, Android tablet, espresso machine, scale, and R2 were not operated during this release.
Update the skin to 0.4.0 using Sabotage1/WorkFlow-Skin in Decaid, or install the attached workflow-skin.zip.
WorkFlow Skin v0.3.13
WorkFlow now leaves its screensaver automatically when Home Assistant wakes the machine. Previously, the screen stayed in sleep mode and the internal sleep flag prevented startup-preset recovery.
- Confirm external wake through a fresh machine-state read after confirmed sleep, triggered by live telemetry, WebView resume, or the five-second fallback poll.
- Restore brightness and wake lock according to settings, reset the idle timer, restore the configured startup preset, and recover devices.
- Avoid sending another machine wake/idle command after an external wake. An active brew continues without applying the startup preset mid-shot.
- Preserve the screensaver for failed or unconfirmed sleep, disconnection, and missing state. Stale telemetry or a delayed read from an earlier sleep cycle cannot dismiss a newer sleep request.
Validation: 415 unit/integration tests, 24 desktop/tablet browser checks, production build, and ZIP integrity/version checks. All 61 REST/telemetry route contracts pass against both Decaid 0.8.5 and 0.8.6, with three explicit legacy fallbacks reported separately. The browser scenarios simulate native machine state changes without touching the skin's wake button; live Home Assistant, Android, and espresso-machine hardware were not operated in this session.
Update the WorkFlow skin to 0.3.13 using Sabotage1/WorkFlow-Skin in Decaid, or install the attached workflow-skin.zip.
WorkFlow Skin v0.3.12
Waking the machine now restores the configured startup preset even when a different preset was chosen before sleep. Cold boot and wake restoration can proceed while optional display and peripheral requests are delayed.
- Start a new preset-selection cycle on wake. Choices made after waking still take priority; without a configured startup preset, the last selection remains selected.
- Prevent old workflow refreshes and delayed pre-sleep profile writes from restoring a previous preset.
- Keep machine wake ordering independent of display restoration and BLE discovery. Delayed sleeping telemetry cannot cancel an explicit wake, and obsolete device recovery stops at sleep-cycle boundaries.
- Retain confirmed machine sleep, immediate shot Review, and Review without a connected scale or completed native persistence.
Validated against Decaid 0.8.5, the latest stable release at publication: 410 unit/integration tests, 20 desktop/tablet browser checks, 61 REST/telemetry contracts, production build, and ZIP integrity/version checks. Browser checks use a simulated gateway; physical tablet, espresso machine, scale, and R2 behavior were not tested on hardware in this session.
Update the WorkFlow skin through Decaid using Sabotage1/WorkFlow-Skin, or install the attached workflow-skin.zip. This release updates the skin to 0.3.12; the host app remains Decaid 0.8.5.