Repository navigation
Caruspex 0.5.0
Deutsch
Mehr Wege ins Auto: Bluetooth ohne Umwege, das ENET-Kabel für BMW und alle Steuergeräte bei BMW und Mini.
Adapter und Verbindung
- Bluetooth LE: Adapter wie Vgate iCar Pro BLE, vLinker, OBDLink CX oder Veepeak BLE findet Caruspex direkt, ohne Koppeln. Der passende Kanal wird selbst erkannt, der zuletzt benutzte Adapter gemerkt
- Klassisches Bluetooth: einmal im System gekoppelte Adapter verbinden sich direkt, auch unter Linux ohne rfcomm-Einrichtung
- BMW ENET: mit einem ENET-Kabel findet Caruspex den BMW oder Mini im Netzwerk und liest über Ethernet, ganz ohne Adapterchip. Fehlerspeicher, Live-Werte, Gesundheitscheck und alle Steuergeräte laufen darüber wie gewohnt
BMW und Mini
- Alle Steuergeräte ab der F-Baureihe über die BMW-eigene Adressierung: Motor, Getriebe, DSC, Airbag, Lenkung, Kombi, Klima, Head Unit und mehr, mit einem Adapter oder dem ENET-Kabel
- Suchlauf über alle 128 Diagnoseadressen, der auch Steuergeräte findet, die in keiner Liste stehen
- Fehlercodes im BMW-Format, so wie die Werkstattsoftware sie zeigt (zum Beispiel 480A10)
- Der 4er Gran Coupé (F36) hat einen eigenen Eintrag im Katalog
Prüfbericht ohne Klicken
- caruspex --port COM3 --report bericht.pdf verbindet, liest das Auto und schreibt den Bericht als PDF oder HTML. Dazu gibt es --port, --bluetooth und --enet als Startschalter
Kommandozeile
- Neuer Befehl enet listet die BMW im Netzwerk, --enet verbindet über das ENET-Kabel
- uds wählt die Steuergeräteliste jetzt selbst nach der Fahrgestellnummer
Behoben
- Beim Suchlauf über alle Steuergeräte ging eine Ersatzanfrage bei BMW ohne die Adresse des Steuergeräts hinaus
Hinweis: Caruspex liest nur. Codieren, Flashen und Leistungssteigerung gehören in die Werkstatt- und Tuningsoftware. Bluetooth und ENET sind bisher nur mit nachgebauten Geräten und Autos getestet, über Rückmeldungen vom echten Auto freuen wir uns. Die Pakete sind weiterhin nicht signiert.
English
More ways into the car: Bluetooth without detours, the ENET cable for BMW, and every control unit on BMW and Mini.
Adapters and connection
- Bluetooth LE: Caruspex finds adapters such as Vgate iCar Pro BLE, vLinker, OBDLink CX or Veepeak BLE directly, without pairing. It works out the right channel itself and remembers the adapter used last
- Classic Bluetooth: adapters paired once in the system connect directly, on Linux too without setting up rfcomm
- BMW ENET: with an ENET cable Caruspex finds the BMW or Mini on the network and reads over Ethernet, with no adapter chip at all. Fault memory, live data, health check and every control unit work over it as usual
BMW and Mini
- Every control unit from the F series on through BMW's own addressing: engine, gearbox, DSC, airbag, steering, instrument cluster, climate, head unit and more, with an adapter or the ENET cable
- A sweep over all 128 diagnostic addresses that also finds units no list knows
- Fault codes in BMW's format, as the workshop software shows them (for example 480A10)
- The 4 Series Gran Coupé (F36) has its own catalogue entry
Report without clicking
- caruspex --port COM3 --report report.pdf connects, reads the car and writes the report as PDF or HTML. --port, --bluetooth and --enet are available as start options for it
Command line
- New command enet lists the BMWs on the network, --enet connects over the ENET cable
- uds now picks the control unit list by itself from the VIN
Fixed
- During the scan of all control units, a fallback request on BMW went out without the unit's address
Note: Caruspex only reads. Coding, flashing and performance tuning belong in workshop and tuning software. Bluetooth and ENET have so far only been tested with simulated devices and cars; reports from real cars are welcome. The packages are still not signed.