Skip to content

Releases

v0.4.6

Choose a tag to compare

@github-actions github-actions released this 12 Nov 15:05

Aditor v0.4.6

修正

  • VALORANT 分局檔改以正確遊戲分析:將一支含多場對戰的影片「分局」後,切出的檔不再一律標為 Apex,而是沿用原影片的遊戲;同時保留遊戲與畫面比例標籤,4:3 等非 16:9 的 VALORANT 分局檔不再被當成 16:9 分析。
  • 無法錄影的混合顯示卡筆電可改用視窗擷取:部分混合 GPU 筆電的螢幕擷取(DDA)回報不支援(0x887A0004),而 Windows 10 的自動擷取一律選擇 DDA,導致完全無法錄影。現在遇到此錯誤會對同一遊戲程序改用視窗擷取(WGC)重試一次並提示使用者。
  • 錄影不再因空的第一段卡住:錄影器等待第一個影格逾時後,只留下空的第一段的工作現在會直接丟棄,不再回報收尾失敗、封鎖錄影直到重新啟動,也不會讓下次啟動的補收尾一直失敗。
  • 遊戲重新啟動時改為等待新視窗:視窗擷取開始的瞬間若遊戲視窗已被關閉,現在會等待遊戲的新視窗,不再當成擷取失敗。
  • 遊戲偵測不再失敗:遊戲行程查詢改為一次只執行一個 tasklist;先前同時執行多個時,部分電腦會出現 0xC0000142(DLL 初始化失敗)而無法偵測遊戲。
  • 防毒或同步程式短暫鎖檔不再中斷逐局剪檔:錄影工作的狀態檔被暫時鎖住時,會短暫重試(約 1.5 秒)後再放棄。
  • 在檔案總管刪除的錄影可重新產生:已收尾的影片若在程式外被刪除(檔案總管、防毒),只要錄影段落還在,下次啟動會重新剪出,不再每次啟動都補收尾失敗。
  • 持續交戰畫面不再切斷對局:Apex 對局切分時,畫面上仍有小地圖與血條等交戰介面就不會誤判為開場畫面,避免把一場對局切成兩段。
  • 網路路徑影片不再匯入後無法儲存:\\伺服器\共用資料夾 這類網路路徑的影片與監看資料夾現在會在匯入時就被拒絕;先前可以匯入與分析,但編輯內容、重新分析與匯出都會失敗。請改用對應的磁碟代號。
  • 存檔更可靠:分析快取與設定檔改為寫入完整並同步到磁碟後才取代舊檔(與媒體庫、專案相同),避免存檔後立刻斷電或磁碟已滿時留下空白或不完整的檔案。
  • 移除影片時一併清除代理檔與縮圖:先前從媒體庫移除的影片,其預覽用代理檔與縮圖會一直留在應用程式資料夾。分析快取仍刻意保留,因為其中包含編輯內容。
  • 清除中斷的匯出暫存檔:合併匯出中途當機或被強制結束時留在匯出資料夾的 .aditor-seg-* 中間檔,會在下次匯出開始時清除。

錯誤回報改善

  • 已不存在的麥克風或輸出裝置改歸類為「找不到音訊裝置」,不再回報為「音訊來源意外停止」。
  • 影片解碼完全失敗時附帶 ffmpeg 的結束代碼。
  • 硬體編碼送出或接收失敗時保留 FFmpeg 的錯誤原因(僅限可列印 ASCII、最多 200 字元,不含路徑)。
  • OBS WebSocket 連線失敗時保留關閉代碼,可區分驗證失敗與無法連線。
  • 錄影服務失敗附帶失敗的系統呼叫名稱(不含路徑)。

已知限制

  • 尚未驗證:以真實 VALORANT 多場錄影實際分局、1440p/超寬螢幕錄影的分析準確度、遊戲 FPS 影響。
  • Windows 執行檔未進行程式碼簽章。

更新方式

  • 0.2.2 至 0.4.5 安裝版可透過自動更新升級。
  • 0.2.0/0.2.1 安裝版請手動下載並執行 Aditor-Setup-0.4.6.exe。
  • 免安裝版請下載 Aditor-0.4.6-Portable.exe 手動更新。

Fixes

  • VALORANT split parts are analyzed as VALORANT: splitting a multi-match video no longer tags every part as Apex; parts keep the source video's game, and the game and aspect tags survive the cut, so 4:3 and other non-16:9 VALORANT parts are no longer analyzed as 16:9.
  • Hybrid-GPU laptops that could not record fall back to window capture: on some hybrid-GPU laptops Desktop Duplication (DDA) returns unsupported (0x887A0004), and Windows 10 auto capture always picks DDA, so recording never worked. On that error the same game process is retried once with window capture (WGC) and the user is told.
  • An empty first segment no longer blocks recording: when the recorder times out waiting for the first frame, a session holding only that empty segment is now discarded instead of failing finalization, blocking recording until restart, and failing startup recovery.
  • A game restart waits for the new window: if the game window disappears just as window capture starts, the app now waits for the game's new window instead of reporting a capture failure.
  • Game detection no longer fails: game process queries run one tasklist at a time; running several at once made some PCs fail with 0xC0000142 (DLL initialization failed).
  • Brief antivirus or sync-client locks no longer abort per-match cutting: replacing a session state file retries for about 1.5 s before giving up.
  • Recordings deleted in Explorer are cut again: if a finalized video is deleted outside the app while its segments remain, the next start cuts it again instead of failing recovery on every launch.
  • Ongoing fights no longer split an Apex match: match splitting no longer classifies a frame as an opening screen while combat HUD (minimap, health bars) is visible.
  • Network-path videos are rejected at import: videos and watch folders on network paths such as \\server\share are now refused at import. They used to import and analyze, but saving edits, reanalysis and export all failed. Use a mapped drive letter instead.
  • Safer saves: the analysis cache and settings are now written in full and flushed to disk before replacing the old file, like the library and projects, so a power loss or full disk right after saving cannot leave an empty or truncated file.
  • Removing a video also removes its proxy and thumbnail: preview proxies and thumbnails of removed videos used to stay in the app data folder forever. Analysis caches are still kept on purpose because they hold edits.
  • Interrupted export leftovers are cleaned up: .aditor-seg-* intermediate files left in the export folder by a crashed or killed concat export are removed when the next export starts.

Better error reports

  • A microphone or output device that no longer exists is reported as a missing audio device instead of an audio source that stopped unexpectedly.
  • Decode failures include ffmpeg's exit code.
  • Hardware encoder send/receive failures keep FFmpeg's reason (printable ASCII, at most 200 characters, no paths).
  • OBS WebSocket connection failures keep the close code, separating authentication failures from an unreachable OBS.
  • Recording service failures carry the failing system call name (no path).

Known limitations

  • Not yet verified: splitting a real multi-match VALORANT recording, analysis accuracy on 1440p/ultrawide recordings, and game FPS impact.
  • Windows executables are not code signed.

How to update

  • 0.2.2 through 0.4.5 installs can upgrade through auto-update.
  • 0.2.0/0.2.1 installs need to download and run Aditor-Setup-0.4.6.exe manually.
  • Portable builds: download Aditor-0.4.6-Portable.exe to update manually.

完整變更 / Full changelog: v0.4.5...v0.4.6

Aditor v0.4.5

Choose a tag to compare

@ShiQu1218 ShiQu1218 released this 06 Nov 16:40
68918f1

新增與改善

  • 分析引擎影像運算加速:縮放、HSV、白色遮罩與長核形態學運算改為位元層級等價的更快實作。非 16:9 來源的縮放(1080p 縮至 720p)由 146.6 毫秒降至 13.0 毫秒(11.3 倍);480×118 白色遮罩由 550 微秒降至 72 微秒(7.7 倍);長核形態學由 11.0 毫秒降至 4.9 毫秒(2.3 倍)。1080p 即時偵測每影格約快 3%(16.19 → 15.67 毫秒)。
  • 觀戰畫面與分析前置加速:
    • 觀戰影格不再執行會被丟棄的 Mixtape 偵測並預先準備樣板,觀戰影格偵測由 21.99 毫秒降至 5.26 毫秒(4.2 倍),一般影格約快 4.7%。
    • 平行分析的分段改為平衡「實際解碼長度」:226 秒影片最長解碼段由 88.5 秒降至 80.6 秒(−9%),整體分析中位數 22.18 → 21.66 秒。
    • 未帶遊戲標籤的影片(匯入檔)其遊戲與畫面比例取樣改在同一解碼視窗內完成:前置階段由 4.38 秒降至 3.64 秒(−17%),整體分析 14.86 → 14.17 秒(−4.7%)。取樣影格逐位元相同,分析結果與修改前一致。
  • 錄影器喚醒次數降低:音訊混音迴圈由每秒 271 次喚醒降至 98 次,WGC 管理迴圈由每秒 9.0 次降至 0.99 次,讓筆電在錄影時 CPU 更容易進入深層閒置。
  • 遊戲偵測更省電:遊戲未執行時改為針對各遊戲的篩選查詢(約 31 毫秒),不再每 3 秒列出全部行程(約 500 毫秒 CPU,約佔單一核心 16.7%);遊戲執行中以輕量存活檢查取代,並每 30 秒完整比對一次以防範 PID 重用。
  • 匯入與編輯器儲存加速:內容未變的資料庫更新不再重寫並同步整份資料庫,也不再廣播更新。500 筆資料庫中,500 次未變更狀態更新由 1,350.6 毫秒降至 281.2 毫秒,100 次未變更精華更新由 206.6 毫秒降至 9.6 毫秒。

修正

  • 錄影啟動不再執行編碼器探測:錄影啟動時不再對每張 GPU 的每個編碼器做試編碼與音訊裝置列舉。先前在負載高的 Intel Arc 機器上,該探測會於 30 秒期限內在不同階段逾時,導致錄影重試持續失敗。
  • 監看失敗後可自動恢復:資料夾監看器失敗後會重新建立;Studio 相關 Hook 補齊遺漏的相依項目,避免使用過時狀態。
  • 錯誤回報涵蓋已攔截的錄影服務失敗:已被攔截處理的錄影服務失敗現在也會回報,協助診斷。

已知限制

  • 效能數據來自本機基準測試(AMD Ryzen 7 7700 與負載不一的開發機),不代表所有硬體;分析整體加速幅度僅約 2% 至 5%。
  • 遊戲行程查詢改為快取後,若 PID 被重用且查詢持續成功,「遊戲結束」的判定最多可能延遲約 30 秒外加一次防抖間隔。
  • 尚未驗證:1440p/超寬螢幕錄影的分析準確度、21:9/4:3 匯入影片的比例偵測、60 秒硬體錄影量測與遊戲 FPS 影響。
  • Windows 執行檔未進行程式碼簽章。

更新方式

  • 0.2.2 至 0.4.4 安裝版可透過自動更新升級。
  • 0.2.0/0.2.1 安裝版請手動下載並執行 Aditor-Setup-0.4.5.exe。
  • 免安裝版請下載 Aditor-0.4.5-Portable.exe 手動更新。

實驗數據:docs/v0.4.5-perf-experiments.md


New and improved

  • Faster engine image operations: resize, HSV, white mask and long-kernel morphology have bit-identical faster implementations. Non-16:9 resize (1080p to 720p) drops from 146.6 ms to 13.0 ms (11.3x); a 480x118 white mask from 550 us to 72 us (7.7x); long-kernel morphology from 11.0 ms to 4.9 ms (2.3x). Live detection is about 3% faster per 1080p frame (16.19 to 15.67 ms).
  • Faster spectating and analysis prelude:
    • Spectating frames no longer run a Mixtape detection whose result was discarded, and templates are prepared once: spectating-frame detection drops from 21.99 ms to 5.26 ms (4.2x), regular frames about 4.7% faster.
    • Parallel analysis segments now balance decoded length: the longest decoded segment of a 226 s clip drops from 88.5 s to 80.6 s (-9%); median analysis time 22.18 to 21.66 s.
    • Untagged files (imports) detect game and aspect in one decoder window: prelude 4.38 s to 3.64 s (-17%), full analysis 14.86 to 14.17 s (-4.7%). Sampled frames are bit-identical and results match the previous build.
  • Fewer recorder wakeups: the audio mixer loop drops from 271 to 98 wakeups per second and the WGC management loop from 9.0 to 0.99, letting laptop CPUs idle deeper while recording.
  • Cheaper game detection: with no game running, a filtered per-game query (~31 ms) replaces a full process listing every 3 s (~500 ms CPU, ~16.7% of one core); while a game runs, a lightweight liveness check is used with a full lookup every 30 s to guard against PID reuse.
  • Faster imports and editor saves: library updates that change nothing no longer rewrite, fsync or broadcast the whole library. In a 500-entry library, 500 unchanged status updates drop from 1,350.6 ms to 281.2 ms and 100 unchanged highlight updates from 206.6 ms to 9.6 ms.

Fixes

  • No encoder probe at recording start: starting a recording no longer trial-encodes every encoder on every GPU or enumerates audio devices. On a loaded Intel Arc machine that probe hit the 30 s deadline at a different stage each time, so recording retries kept failing.
  • Watcher recovery: failed folder watchers are recreated, and Studio hooks now declare their missing dependencies to avoid stale state.
  • Telemetry covers caught recording failures: recording service failures that were caught and handled are now reported for diagnosis.

Known limitations

  • Figures come from local benchmarks (AMD Ryzen 7 7700 and shared dev machines) and do not represent every configuration; end-to-end analysis gains are only about 2% to 5%.
  • With the cached process lookup, if a PID is reused while queries keep succeeding, the game-closed transition can be delayed by up to ~30 s plus one debounce interval.
  • Not yet verified: analysis accuracy on 1440p/ultrawide recordings, aspect detection on 21:9/4:3 imports, a 60 s hardware recording measurement, and game FPS impact.
  • Windows executables are not code signed.

How to update

  • 0.2.2 through 0.4.4 installs can upgrade through auto-update.
  • 0.2.0/0.2.1 installs need to download and run Aditor-Setup-0.4.5.exe manually.
  • Portable builds: download Aditor-0.4.5-Portable.exe to update manually.

Experiment data: docs/v0.4.5-perf-experiments.md

完整變更 / Full changelog: v0.4.4...v0.4.5

Aditor v0.4.4

Choose a tag to compare

@ShiQu1218 ShiQu1218 released this 03 Nov 14:16

Aditor v0.4.4

新增與改善

  • 錯誤回報隨機安裝識別碼(Install ID):啟用錯誤回報時,於本機應用程式資料夾產生隨機 UUID v4 作為 user.id,用於統計各問題影響的安裝數量。此識別碼不衍生自硬體、帳號或路徑,且同樣不收集 IP 位址;未啟用時不會建立,關閉錯誤回報時會立即刪除。既有已開啟錯誤回報的使用者升級後亦適用此機制,可隨時至「設定」關閉錯誤回報以刪除識別碼。
  • 子程序啟動失敗提示與診斷:分析引擎、錄影器或即時辨識執行檔缺失或無法啟動時,顯示多語系說明提示(如防毒隔離、權限不足或安裝不完整),並在診斷資訊保留安全的系統錯誤碼(spawn_errno)。
  • 遙測分組與診斷資訊強化:
    • 子程序診斷改以穩定的英文分類與正規化標題分組,不再因動態計數器、階段數值或介面語言拆成多個重複問題;音訊 FIFO/AAC 配置錯誤與時間戳缺口依各自根因分開歸類。
    • 忽略外部強制終止(如系統關機或工作管理員結束,exit code 0x40010004、0xC000013A)造成的非崩潰結束。
    • FFmpeg 解碼失敗時附帶經路徑去識別化的完整最後數行 stderr 輸出;區分錄影索引建立失敗與讀回失敗的診斷訊息;即時辨識引擎異常結束時附帶結束代碼與 stderr 摘要。

修正

  • 補幀期間持續處理排隊音訊:修正追補固定影格率(CFR)影格時,編碼執行緒在內部迴圈連續補幀而未先排空音訊佇列,導致已排隊的聲音被靜音覆蓋的問題。
  • 錄影暫時卡頓後的有界降級與恢復:
    • 超過 2 秒的視訊缺口改以稀疏補幀降級,保留 2 秒關鍵影格邊界與原始 PTS 時間軸,不再逐一重編所有舊時槽;合成 7 秒視訊缺口測試中,編碼張數由 639 張降至 17 張,追補與收尾時間中位數由 872.9 毫秒降至 30.5 毫秒。
    • 超過 5 秒的音訊缺口改以每次最多 0.5 秒分批補齊靜音並與視訊交錯處理,修正暫時卡頓後因音訊缺口超過 5 秒而直接中止整段錄影的問題(合成 7 秒音訊缺口測試由 0/9 成功提升至 9/9 完整收尾)。
    • 封裝(mux)佇列滿載等待上限由 2 秒提高至 10 秒,並為壓縮佇列與未封段封包加上 64 MiB 記憶體上限;逾時時說明磁碟過慢或不可用,並保留已完成分段。
    • 編碼器連續 5 秒無輸出時發送單次多語系警告,恢復輸出後重設;連續停滯達 60 秒才升級為編碼失敗。
  • 錄影期間音訊裝置失效重連:音訊裝置開啟失敗或錄影中途失效時,保留音訊時間軸並以靜音填補,同時約每秒重試原裝置(選用預設裝置時重新解析目前預設裝置,指定特定麥克風時不擅自切換至其他裝置)。

已知限制

  • 錄影卡頓追補數據來自本機合成缺口測試,不代表實際遊戲 FPS 改善,亦不代表所有硬體或真實慢速磁碟的表現。
  • 原生驅動、編碼器或磁碟 I/O 若永久卡死,仍可能使停止錄影需要等待;卡頓期間若超出音訊佇列容量,已丟棄的原始音訊僅能以靜音填補;中斷時僅保證保留已完成的分段,最後未完成的分段不保證完整。
  • 解碼與錄影索引變更僅新增診斷資訊,尚未直接修復對應的底層個案根因。
  • Windows 執行檔未進行程式碼簽章。

更新方式

  • 0.2.2 至 0.4.3 安裝版可透過自動更新升級。
  • 0.2.0/0.2.1 安裝版請手動下載並執行 Aditor-Setup-0.4.4.exe。
  • 免安裝版請下載 Aditor-0.4.4-Portable.exe 手動更新。

New and improved

  • Random install ID for telemetry: when error reporting is enabled, the app stores a random UUID v4 as user.id in the local app data directory so issues show how many installs they affect. The ID is not derived from hardware, account or path data, and IP addresses are still never collected; it is never created while telemetry is disabled and is deleted immediately on opt-out. Existing users who opted in on earlier versions are also covered by this change and can disable error reporting in Settings at any time to delete the ID.
  • Spawn failure explanations and diagnostics: when the analysis engine, recorder or live-detection executable is missing or cannot start, the app shows localized guidance (such as antivirus quarantine, permissions or an incomplete install) and preserves a safe spawn_errno in diagnostics.
  • Better telemetry grouping and fault diagnostics:
    • Child diagnostics now use stable English categories and normalized titles for Sentry grouping instead of splitting one fault across issues by counters, pipeline stages or UI language; audio FIFO/AAC allocation errors and audio timestamp gaps are grouped by their respective root causes.
    • Exits caused by external termination (0x40010004, 0xC000013A) are no longer reported as crashes.
    • FFmpeg decode failures now include redacted complete trailing lines from stderr; recording index creation and read-back failures report distinct messages; live-engine crash diagnostics include the exit code and stderr tail.

Fixes

  • Drain queued audio during CFR catch-up: the encoder worker now drains queued audio between CFR catch-up frames instead of filling the whole frame gap first and overwriting queued audio with silence.
  • Bounded recovery after temporary recording stalls:
    • Video gaps longer than 2 seconds now degrade to sparse catch-up frames while preserving 2-second keyframe boundaries and the original PTS timeline instead of re-encoding every missed slot; in a synthetic 7-second video gap benchmark, encoded catch-up frames dropped from 639 to 17 and median catch-up/finalization time dropped from 872.9 ms to 30.5 ms.
    • Audio gaps longer than 5 seconds are now filled in chunks of up to 0.5 seconds interleaved with video instead of aborting the recording immediately (improving synthetic 7-second audio gap completion from 0/9 to 9/9).
    • The mux queue full wait timeout is raised from 2 seconds to 10 seconds with 64 MiB payload caps on queued and pending packets; timeouts explain slow or unavailable disks and preserve completed segments.
    • A 5-second encoder output stall emits a single localized warning per stall episode and escalates to an encoding failure only after 60 seconds without output.
  • Audio device reconnection during recording: when an audio device fails to open or drops out mid-recording, the recorder preserves the audio timeline, fills silence, and retries the original source roughly once per second (re-resolving the current default device when set to default, without switching away from an explicitly chosen microphone).

Known limitations

  • Stall-recovery figures come from local synthetic gap benchmarks and do not represent real game FPS improvements or every GPU/disk configuration.
  • Permanently hung native driver, encoder or disk I/O calls can still block shutdown; raw audio dropped after exceeding the audio queue capacity can only be replaced with silence; only completed segments are guaranteed to be preserved when a recording aborts.
  • The decode and recording-index diagnostic changes only improve fault visibility and do not fix the underlying root causes.
  • Windows executables are not code signed.

How to update

  • 0.2.2 through 0.4.3 installs can upgrade through auto-update.
  • 0.2.0/0.2.1 installs need to download and run Aditor-Setup-0.4.4.exe manually.
  • Portable builds: download Aditor-0.4.4-Portable.exe to update manually.

完整變更 / Full changelog: v0.4.3...v0.4.4

Aditor v0.4.3

Choose a tag to compare

@github-actions github-actions released this 01 Nov 04:07
aefa2f2

Aditor 更新日誌

v0.4.3

新增與改善

  • 新增錄影擷取方式的遊戲 FPS 影響標示,協助選擇擷取方式。

修正

  • 修正錄影啟動與執行期間的音訊遺失:保留麥克風音訊、回報擷取中斷,並在混音器延遲啟動時保留 AAC 仍可接收的音訊。
  • 修正多聲道音訊轉成立體聲時,後方與側邊環繞聲道遭丟棄的問題。
  • 修正靜音後音訊時間戳、DDA 擷取可見性計時,以及 Riot Client 斷線時誤刪錄影分段的問題。
  • 修正遊戲視窗結束時 Hook 擷取的等待行為,以及缺少引擎或錄影器執行檔時重複回報錯誤的問題。

更新方式

  • 安裝版可透過應用程式內的更新功能下載並安裝。
  • 免安裝版請下載 Aditor-0.4.3-Portable.exe。

Aditor Changelog

v0.4.3

Improvements

  • Show the measured game FPS impact of recording capture methods to help users choose a method.

Fixes

  • Prevent audio loss during recording startup and capture interruptions; preserve microphone audio, report capture failures, and retain startup audio that AAC can still accept when mixing starts late.
  • Preserve rear and side surround channels when downmixing multichannel audio to stereo.
  • Fix audio timestamps after silence, DDA capture visibility timing, and accidental deletion of recording segments after a Riot Client disconnect.
  • Improve Hook capture shutdown when the game window closes and avoid duplicate error reports when the engine or recorder executable is missing.

Updating

  • Installed builds can download and install this update from within the app.
  • For the portable build, download Aditor-0.4.3-Portable.exe.

Aditor v0.4.2

Choose a tag to compare

@ShiQu1218 ShiQu1218 released this 31 Oct 15:35
c21474d

Aditor v0.4.2

新增與改善

  • 分析速度提升:分析前的遊戲與畫面比例偵測改為邊解碼邊比對,並重用圖示樣板統計、FFT 緩衝區與解碼影格;場景樣板不再重複比對。樣板與緩衝區重用使 30 秒影片的辨識耗時減少約 21%;邊解碼邊比對使 226 秒 1080p60 AV1 影片的整體分析時間從 17.6 秒降至 16.0 秒。兩者辨識結果皆與修改前相同。
  • 新錄影跳過遊戲辨識:Apex Legends 錄影現在也會寫入遊戲標籤,分析時不必再取樣辨識遊戲,同一部影片再縮短約 1.5 秒。既有錄影沒有標籤,仍會照常辨識。
  • WGC 錄影對遊戲 FPS 的影響降低:高 FPS 遊戲中 WGC 送出的多餘畫面減少。在模擬約 178 FPS 的測試中,平均 FPS 損失從 2.15% 降至 1.81%。
  • 大量片段操作更順暢:「全部加入」、專案關聯同步、片段狀態更新與自動剪輯改用索引與批次更新。8,000 筆合成資料中,「全部加入」從 389 毫秒降至 23 毫秒。
  • 長時間錄影的即時辨識負擔降低:事件追蹤、回合精華與錄影分段管理不再反覆掃描整段歷史,長時間錄影時的 CPU 成本較低。

修正

  • 復原時保留錄影與設定:錄影索引遺失但仍有片段時保留工作資料夾;整場、逐局及 OBS 逐局輸出不再覆寫其他程式剛建立的同名檔案;設定檔損壞時先備份,確定新設定已寫入才取代原檔,避免誤套預設值、重新開啟自動錄影或診斷上傳。

已知限制

  • 效能數字來自本機合成資料與模擬遊戲負載,不代表實際遊戲 FPS 或所有影片格式的結果。
  • 部分電腦仍可能遇到錄影編碼停滯、音訊時間缺口或啟動逾時。
  • Windows 執行檔未進行程式碼簽章。

更新方式

  • 0.2.2 至 0.4.1 安裝版可透過自動更新升級。
  • 0.2.0/0.2.1 安裝版請手動下載並執行 Aditor-Setup-0.4.2.exe。
  • 免安裝版請下載 Aditor-0.4.2-Portable.exe 手動更新。

New and improved

  • Faster analysis: game and aspect detection before analysis now match frames while the next ones decode, icon template statistics, FFT buffers and decode frames are reused, and scene templates are no longer matched repeatedly. Reuse cut detection time on a 30 s sample by about 21%; overlapping decode and matching cut end-to-end analysis of a 226 s 1080p60 AV1 video from 17.6 s to 16.0 s. Results are identical in both cases.
  • New recordings skip game detection: Apex Legends recordings are now tagged with their game, so analysis no longer samples the video to identify it, saving about another 1.5 s on the same video. Existing recordings have no tag and are still detected as before.
  • Lower game FPS cost for WGC recording: WGC delivers fewer surplus frames in high-FPS games. In a simulated ~178 FPS game, the average FPS cost went from 2.15% to 1.81%.
  • Smoother bulk clip operations: Add all, project link sync, clip state updates and auto-clip use indexes and batched updates. With 8,000 synthetic items, Add all went from 389 ms to 23 ms.
  • Lighter live detection during long recordings: event tracking, round highlights and recording segment management no longer rescan the whole history, reducing CPU cost in long sessions.

Fixes

  • Recovery preserves recordings and settings: the work folder is kept when the recording index is missing but segments remain; full, per-match and OBS per-match outputs no longer overwrite a file of the same name created by another program; a corrupt settings file is backed up and replaced only after the recovered settings are written, so defaults, auto-recording and diagnostic upload are not re-enabled by mistake.

Known limitations

  • Performance figures come from local synthetic data and a simulated game load; they do not predict real game FPS or every video format.
  • Some PCs may still encounter stalled encoding, audio timestamp gaps or startup timeouts.
  • Windows executables are not code signed.

How to update

  • 0.2.2 through 0.4.1 installs can upgrade through auto-update.
  • 0.2.0/0.2.1 installs need to download and run Aditor-Setup-0.4.2.exe manually.
  • Portable builds: download Aditor-0.4.2-Portable.exe to update manually.

完整變更 / Full changelog: v0.4.1...v0.4.2

Aditor v0.4.1

Choose a tag to compare

@github-actions github-actions released this 30 Oct 01:36

Aditor v0.4.1

新增與改善

  • 依對局分割影片:已分析的 Apex Legends 與 VALORANT 影片可從媒體庫選單分割成逐局檔案。保留原始影片,不覆寫既有輸出;分割完成後自動匯入並分析。
  • Apex 日文擊殺偵測:新增日文團隊死鬥擊殺橫幅、控制模式與軍備競賽擊殺偵測,並改善控制模式較暗擊殺資訊的辨識。這些模式與語言的驗證範圍仍有限,詳見專案準確度報告。
  • 即時預覽音量:新增即時播放音量控制。

修正

  • 分析引擎中斷後的 EPIPE 錯誤:處理引擎輸入管線關閉時的錯誤,讓請求正常失敗並沿用既有重啟機制,避免未捕捉例外;包含取消與關閉流程。
  • 錄影短暫封裝壅塞:封裝佇列滿載時允許編碼執行緒短暫等待,降低瞬間壅塞直接中止錄影的機會,並保留佇列與記憶體上限。
  • 錄影錯誤診斷:保留較早發生的實際錯誤,新增編碼、封裝、音訊時間軸及啟動探測階段的診斷資訊,協助定位中斷原因。
  • 對局分割邊界:改善 Apex 對局開頭的地圖/角色選擇畫面判定;VALORANT 比分介面短暫消失時,避免把同一局誤切開。
  • 控制模式誤判:排除擊殺資訊中自己是受害者的列,改善密集文字與近似玩家名稱的判定。
  • 非同步操作與編輯保留:改善重新分析、縮圖、匯出、錄影收尾與關閉流程的失敗處理,減少操作競態造成編輯遺失或畫面未更新的情況。

已知限制

  • 部分電腦仍可能遇到錄影編碼停滯、音訊時間缺口或啟動逾時;此版加入保護與診斷,尚未確認所有原生根因均已排除。
  • 日文團隊死鬥目前僅驗證擊殺,尚無助攻樣本;英文控制模式及其他未驗證設定不保證辨識結果。
  • Windows 執行檔未進行程式碼簽章。

更新方式

  • 0.2.2 至 0.4.0 安裝版可透過自動更新升級。
  • 0.2.0/0.2.1 安裝版請手動下載並執行 Aditor-Setup-0.4.1.exe。
  • 免安裝版請下載 Aditor-0.4.1-Portable.exe 手動更新。

New and improved

  • Split videos by match: analyzed Apex Legends and VALORANT videos can be split from the library menu. The source is kept, existing outputs are not overwritten, and completed parts are imported and analyzed automatically.
  • Japanese Apex kill detection: adds Japanese Team Deathmatch kill banners, Control and Gun Run kills, and improves recognition of dim Control kill-feed rows. Validation remains limited to the modes and samples documented in the accuracy reports.
  • Live preview volume: adds volume control for live playback.

Fixes

  • EPIPE after an analysis-engine interruption: handles input-pipe errors so requests fail through the normal error path and the existing restart mechanism can recover, including cancellation and shutdown.
  • Brief recording mux congestion: allows the encoder worker to wait briefly for a full mux queue instead of stopping immediately, while keeping queue and memory limits.
  • Recording diagnostics: preserves the earlier underlying error and adds encoder, mux, audio-timeline and startup-probe details to help locate interruptions.
  • Match boundaries: improves Apex map/legend-selection boundaries and avoids splitting a VALORANT match across a brief score-HUD gap.
  • Control false positives: excludes rows where the local player is the victim and improves dense-text and similar-name handling.
  • Asynchronous operations and edit preservation: improves failure handling around reanalysis, thumbnails, export, recording finalization and shutdown to reduce lost edits and stale UI after races.

Known limitations

  • Some PCs may still encounter stalled encoding, audio timestamp gaps or startup timeouts. This release adds safeguards and diagnostics; it does not establish that every native root cause has been fixed.
  • Japanese Team Deathmatch kills are validated, but no assist sample is available. English Control and other unverified configurations remain unsupported or unverified.
  • Windows executables are not code signed.

How to update

  • 0.2.2 through 0.4.0 installs can upgrade through auto-update.
  • 0.2.0/0.2.1 installs need to download and run Aditor-Setup-0.4.1.exe manually.
  • Portable builds: download Aditor-0.4.1-Portable.exe to update manually.

完整變更 / Full changelog: v0.4.0...v0.4.1

Aditor v0.4.0

Choose a tag to compare

@github-actions github-actions released this 29 Oct 01:29
56dd77b

Aditor v0.4.0

重點

  • 錄影更不影響遊戲:錄影時遊戲的 1% low 最多提升約 9%(視窗擷取、SDR),錄影對 1% low 的影響已降到量不出來。詳見下方「效能」。
  • 遊戲中不再跑背景分析:Apex Legends 或 VALORANT 執行時,背景分析會暫停,等遊戲結束才開始。遊戲中跑背景分析原本會讓 1% low 下降約 16.5%、0.1% low 下降約 23.6%。
  • 分析引擎改用 Rust 重寫:完整分析快約 20%,既有的分析快取可直接沿用。
  • 系統音訊不再錄進 Aditor 自己的聲音:錄影中打開 Aditor 預覽時,預覽的聲音不會再被錄進去、越疊越大聲。

效能

以下數字來自單一台電腦(RTX 5080、4K 240 Hz 螢幕、Windows 11)上的模擬遊戲負載,錄影設定為 HEVC 1080p60 NVENC。實際遊戲的 FPS 會因電腦與畫面而不同,僅供參考。

錄影時的遊戲 FPS(與 0.3.6 相比)

擷取方式 平均 FPS 1% low 0.1% low
視窗擷取(WGC),SDR +1.4% +9.2% +9.5%
視窗擷取(WGC),HDR +0.8% +7.6% +2.6%
螢幕擷取(DDA),SDR −0.5% +3.6% +2.8%
螢幕擷取(DDA),HDR +0.3% +4.0% +5.2%
  • 視窗擷取(SDR)錄影對 1% low 的影響從 −6.5% 降到量不出來。
  • 0.1% low 每次量測的差異較大,百分比只能參考。
  • 分析引擎:四段實際錄影的完整分析從 50.1–59.6 秒縮短到 39.1–47.9 秒,結果與舊版相同。

新增與改善

  • 錄影 GPU 成本降低:SDR 螢幕改用較省的畫面格式;NVIDIA 顯示卡直接以 NV12 送入編碼器;HDR 在錄影解析度做色調對應;螢幕擷取的游標改由 GPU 繪製。
  • 分析引擎:改為 Rust 程式,不再打包 Python。引擎結束時,它啟動的 FFmpeg 也會一併結束。

修正

錄影

  • 逐局錄影變成一整段:螢幕擷取(DDA)在對局之間切出遊戲時,偵測畫面會正確變黑,對局能正常切開。切回遊戲的瞬間,偵測畫面也不會再混入桌面內容。
  • 視窗擷取還原後偵測停擺:遊戲從最小化還原但沒有取得焦點時,即時偵測會正常恢復,也不會再誤報視窗遺失。
  • VALORANT 錄影被當成 Apex:整段收尾或從中斷恢復時,會保留錄影的遊戲類型。
  • OBS 逐局收尾:即時事件轉換失敗時,仍會排入分析並列出輸出檔。
  • 即時偵測未正常結束:會保留對局影片,不會遺失片段。
  • 部分顯示卡錄影中斷:影像處理器無法直接讀取畫面時改用複製,不再中斷錄影。
  • 游標邊緣過暗:修正游標陰影與邊緣被畫得太暗。

分析

  • 大逃殺被誤判為控制模式:修正大逃殺錄影長時間被誤判、導致擊殺橫幅全部遺漏的問題。
  • 分析佇列與工作室卡住:遊戲偵測失敗、分析被取消或失敗時,佇列會繼續處理,工作室也能重新載入或重試。
  • 重新分析遺失剪輯:取消、切換快取位置或遊戲中途啟動時,已接受的 AI 片段不會再遺失。
  • 分析引擎當掉後無法再分析:引擎內部錯誤時會回報錯誤,不再一直顯示忙碌。

監看資料夾

  • 複製中的檔案匯入失敗:會等檔案寫完、解除鎖定後再匯入;權限設定只允許讀取的檔案也能匯入。
  • 監看資料夾的變更無法儲存時會顯示提示。

匯出

  • 誤跳 OpenH264 下載提示:開啟匯出時,會等編碼器偵測完成再判斷是否需要 OpenH264。
  • 多來源誤判可快速匯出:有來源無法讀取規格時,不再顯示可免重新編碼。
  • 多段匯出的進度依各段長度計算,更平順。

資料安全

  • 設定檔損壞時保留原檔,隱私選項(診斷資料、自動錄影)維持關閉。
  • 媒體庫檔案無法讀取或備份時,不會被覆寫。
  • 還有未完成的錄影時,不能變更儲存位置,避免錄影遺失。

其他

  • 即時畫面保持開啟時,會跟上新開始的錄影;切換影片後播放鍵狀態正確。
  • 修正系統列圖示遺失、自動更新記錄造成的錯誤。

更新方式

  • 0.2.2 至 0.3.6 安裝版可透過自動更新升級。
  • 0.2.0/0.2.1 安裝版請手動下載並執行 Aditor-Setup-0.4.0.exe。
  • 免安裝版請下載 Aditor-0.4.0-Portable.exe 手動更新。

Windows 執行檔未進行程式碼簽章。


Highlights

  • Recording costs the game less: while recording, the game's 1% low improves by up to about 9% (window capture, SDR), and recording no longer has a measurable effect on the 1% low. See "Performance" below.
  • No background analysis while you play: background analysis pauses while Apex Legends or VALORANT is running and starts after the game exits. Running it during play used to lower the 1% low by about 16.5% and the 0.1% low by about 23.6%.
  • Analysis engine rewritten in Rust: full analysis is about 20% faster, and existing analysis caches keep working.
  • System audio no longer records Aditor itself: opening the Aditor preview while recording no longer feeds its sound back into the recording and makes it louder and louder.

Performance

These numbers come from a synthetic game load on a single PC (RTX 5080, 4K 240 Hz display, Windows 11), recording HEVC 1080p60 with NVENC. Real games vary by PC and scene, so treat them as a guide.

Game FPS while recording (compared with 0.3.6)

Capture Average FPS 1% low 0.1% low
Window capture (WGC), SDR +1.4% +9.2% +9.5%
Window capture (WGC), HDR +0.8% +7.6% +2.6%
Screen capture (DDA), SDR −0.5% +3.6% +2.8%
Screen capture (DDA), HDR +0.3% +4.0% +5.2%
  • With window capture (SDR), recording's effect on the 1% low dropped from −6.5% to no measurable difference.
  • The 0.1% low varies a lot between runs, so its percentages are only indicative.
  • Analysis engine: full analysis of four real recordings went from 50.1–59.6 s to 39.1–47.9 s, with the same results as before.

New and improved

  • Lower recording GPU cost: SDR displays use a cheaper frame format, NVIDIA GPUs feed the encoder NV12 directly, HDR is tone-mapped at the recording size, and screen capture draws the cursor on the GPU.
  • Analysis engine: now a Rust program instead of packaged Python. FFmpeg processes it starts now exit with it.

Fixes

Recording

  • Per-match recording saved as one file: with screen capture (DDA), switching away from the game between matches blanks the detection frames again, so matches split correctly. Detection frames no longer pick up desktop content right after you switch back.
  • Detection stalled after restoring window capture: when the game is restored from minimized without taking focus, live detection resumes and no false "window lost" is reported.
  • VALORANT recordings treated as Apex: whole-session finalizing and recovery keep the recorded game.
  • OBS per-match finalizing: a failed live-event conversion still queues analysis and lists the output.
  • Live detection that did not finish cleanly: match footage is kept instead of lost.
  • Recording stopping on some GPUs: when the video processor cannot read a frame directly, it is copied first instead of ending the recording.
  • Dark cursor edges: cursor shadows and edges are no longer drawn too dark.

Analysis

  • Battle Royale detected as Control: fixes long stretches of a Battle Royale recording being treated as Control mode, which dropped every kill banner.
  • Stuck analysis queue or Studio: the queue keeps moving when game detection fails or analysis is cancelled or fails, and Studio reloads or offers Retry.
  • Lost clips after reanalysis: accepted AI clips are no longer lost when a run is cancelled, the cache location changes, or a game starts mid-run.
  • No analysis after an engine crash: an internal engine error is reported instead of leaving the engine busy forever.

Watch folders

  • Files imported while still copying: files are imported once the copy finishes and the file is unlocked; files whose permissions only allow reading are imported too.
  • Watch-folder changes that cannot be saved now show a notice.

Export

  • Unneeded OpenH264 download prompt: the export drawer waits for encoder detection before deciding whether OpenH264 is needed.
  • Fast export offered for mixed sources: when a source's format cannot be read, export no longer offers stream copy.
  • Multi-part export progress is weighted by each part's length, so it moves more evenly.

Data safety

  • A corrupt settings file is kept, and privacy options (diagnostics, auto-recording) stay off.
  • A library file that cannot be read or backed up is never overwritten.
  • The storage location cannot be changed while unfinished recordings remain, so they are not stranded.

Other

  • The live screen follows a new recording while it stays open, and the play button shows the right state after the video switches.
  • Fixes a missing tray icon and errors caused by auto-update logging.

How to update

  • 0.2.2 through 0.3.6 installs can upgrade through auto-update.
  • 0.2.0/0.2.1 installs need to download and run Aditor-Setup-0.4.0.exe manually.
  • Portable builds: download Aditor-0.4.0-Portable.exe to update manually.

Windows executables are not code signed.

v0.3.6

Choose a tag to compare

@github-actions github-actions released this 27 Oct 01:47
f0b1c71

Aditor v0.3.6

本版包含未公開發布的 0.3.5 所有內容。

新增與改善

  • 預覽軟體解碼:設定中選擇軟體解碼時,工作室預覽也會改用 CPU 解碼,改善部分電腦預覽慢動作、音畫不同步的問題。此設定需重新啟動才會生效,設定頁會顯示提示與「立即重新啟動」按鈕。
  • 回報問題:設定新增「回報問題」,可傳送去識別化的文字說明(需開啟診斷資料分享),回報時會自動附上裝置資訊。

修正

  • 螢幕擷取(DDA)切換視窗變黑:螢幕擷取不再於遊戲不在前景時輸出黑畫面,切出遊戲(例如切到 Aditor 看預覽)時會照實錄下整個螢幕。Aditor 放在另一台螢幕上時,也不會再把遊戲判定為隱藏而切斷對局。
  • 預覽慢動作與跳動:修正播放時時間軸在每次螢幕更新都重繪,造成高更新率螢幕上預覽變成慢動作並週期性跳動的問題。
  • 背景分析:限制背景分析使用的執行緒數量,降低分析時對錄影與剪輯操作的影響。

更新方式

  • 0.2.2 至 0.3.4 安裝版可透過自動更新升級。
  • 0.2.0/0.2.1 安裝版請手動下載並執行 Aditor-Setup-0.3.6.exe。
  • 免安裝版請下載 Aditor-0.3.6-Portable.exe 手動更新。

Windows 執行檔未進行程式碼簽章。


This release includes everything from the unpublished 0.3.5.

New and improved

  • Software decoding for preview: choosing software decoding in Settings now also decodes the Studio preview on the CPU, fixing slow-motion playback and audio running ahead of video on some computers. The setting takes effect after a restart; Settings shows a notice with a "Restart now" button.
  • Report a problem: Settings adds a "Report a problem" row that sends redacted free text (requires diagnostics sharing). Device info is attached automatically.

Fixes

  • Screen capture (DDA) going black when switching windows: screen capture no longer outputs black frames while the game is not in the foreground; switching away from the game (for example, to watch the Aditor preview) now records the whole screen as-is. With Aditor on a second monitor, the game is no longer treated as hidden, so matches are not split.
  • Preview slow motion and judder: the timeline no longer redraws on every display refresh, which made preview play in slow motion and jump periodically on high-refresh monitors.
  • Background analysis: limits the threads used by background analysis, reducing its impact on recording and editing.

How to update

  • 0.2.2 through 0.3.4 installs can upgrade through auto-update.
  • 0.2.0/0.2.1 installs need to download and run Aditor-Setup-0.3.6.exe manually.
  • Portable builds: download Aditor-0.3.6-Portable.exe to update manually.

Windows executables are not code signed.

v0.3.4

Choose a tag to compare

@github-actions github-actions released this 25 Oct 14:50
20c610c

Aditor v0.3.4

新增與改善

  • 專案管理:可開啟、重新命名及刪除已儲存的剪輯專案。
  • Hook擷取(選用):內建錄影新增 Hook擷取方式,使用 OBS Studio 官方簽章的遊戲擷取元件,不會造成滑鼠延遲,遊戲在背景時也能持續擷取。需在設定中手動選用並確認風險說明,自動模式不會使用;無法使用時會自動改用螢幕擷取(DDA)。注意:將外部元件載入遊戲程序可能被反作弊系統視為可疑行為,請自行評估風險。
  • 全螢幕預覽進度列:全螢幕預覽新增可拖曳的進度列,拖曳時同步更新畫面。
  • Apex 偵測:新增「控制」模式對局與擊殺偵測,並支援英文版團隊死鬥開場畫面。
  • 錯誤訊息:分析引擎當機或工作室載入失敗時,顯示具體原因(已隱去使用者路徑),完整內容保留在診斷紀錄中。

修正

  • 錄影卡頓:修正錄影每隔約 2 秒頓一下的問題。原本寫入影片片段時會暫停編碼,硬碟較慢時就會掉幀並以前一幀補上;現在改由獨立執行緒寫入。
  • 視窗擷取(WGC)掉幀與重複幀:修正擷取時間與編碼時間格不一致造成的細微卡頓,並在擷取停滯時自動恢復。
  • 即時回放:跳轉時避開已清除的錄影片段,並改善跳轉穩定性。
  • 錄影復原:加強 OBS 錄影與內建錄影的中斷復原及存檔順序,避免檔案暫時無法讀取時遺失錄影。
  • 編輯資料保存:重新分析時保留手動編輯與強制重新分析的片段;匯出時保護來源檔與預覽。
  • 刪除播放中的影片:修正刪除目前正在播放的影片時可能失敗的問題。
  • VALORANT 分析:硬體解碼時的色彩取樣改為與軟體解碼一致,並依設定使用硬體加速。
  • AI 精華與專案片段同步:加入專案的 AI 精華在片軌上只顯示一段,不再另外疊一段專案範圍。拖曳精華或專案片段的邊緣時兩者一起調整,復原與重做也會一起還原。分割或複製過的片段維持各自獨立;0.3.4 之前加入專案的片段不會同步。
  • 專案切換:只有在成功切換專案後才記住上次開啟的專案。
  • 元件升級:升級至 Electron 45 等建置工具。

更新方式

  • 0.2.2 至 0.3.3 安裝版可透過自動更新升級。
  • 0.2.0/0.2.1 安裝版請手動下載並執行 Aditor-Setup-0.3.4.exe。
  • 免安裝版請下載 Aditor-0.3.4-Portable.exe 手動更新。

Windows 執行檔未進行程式碼簽章。


New and improved

  • Project manager: open, rename and delete saved editing projects.
  • Hook capture (opt-in): built-in recording adds a Hook capture method that uses the OBS Studio signed game-capture component. It does not add mouse latency and keeps capturing while the game is in the background. It must be selected manually in Settings after confirming the risk notice; Automatic mode never uses it, and it falls back to screen capture (DDA) when unavailable. Note: loading an external component into the game process may be treated as suspicious by anti-cheat systems; use it at your own risk.
  • Fullscreen seek bar: the fullscreen preview adds a scrubbable seek bar that updates the frame while dragging.
  • Apex detection: adds Control match and kill detection, and recognizes native English Team Deathmatch banners.
  • Error messages: analysis engine crashes and studio load failures now show the concrete cause (with the user path redacted); the full details stay in the diagnostic log.

Fixes

  • Recording stutter: fixes a hitch roughly every 2 seconds in recordings. Writing each segment to disk used to pause the encoder, so slow disks caused dropped frames that were filled with the previous frame; segments are now written on a separate thread.
  • Window capture (WGC) dropped and duplicated frames: fixes micro-stutter caused by capture timing not matching the encoder's frame slots, and recovers automatically when capture stalls.
  • Live replay: seeks skip recording segments that were already pruned, and seeking is more stable.
  • Recording recovery: hardens interruption recovery and finalize ordering for OBS and built-in recordings, so recordings are not lost when a file is temporarily unreadable.
  • Saved edits: re-analysis keeps manual edits and forced re-analysis clips; export protects source files and previews.
  • Deleting the playing video: fixes failures when deleting the video that is currently playing.
  • VALORANT analysis: hardware decoding now uses the same chroma sampling as software decoding, and analysis honours the hardware acceleration setting.
  • AI highlights stay in step with project clips: an AI highlight added to the project now shows as a single range on the source track instead of a second project range drawn over it. Dragging either edge trims both, and undo/redo restores both together. Split or duplicated clips stay independent; clips added to a project before 0.3.4 are not linked.
  • Project switching: the last opened project is remembered only after the switch succeeds.
  • Dependency upgrades: upgrades to Electron 45 and newer build tooling.

How to update

  • 0.2.2 through 0.3.3 installs can upgrade through auto-update.
  • 0.2.0/0.2.1 installs need to download and run Aditor-Setup-0.3.4.exe manually.
  • Portable builds: download Aditor-0.3.4-Portable.exe to update manually.

Windows executables are not code signed.

Aditor v0.3.3

Choose a tag to compare

@ShiQu1218 ShiQu1218 released this 24 Oct 01:24

Aditor v0.3.3

新增與改善

  • 錄製滑鼠游標:內建錄影新增「錄製滑鼠游標」設定,預設開啟,支援視窗擷取(WGC)與螢幕擷取(DDA)。設定於下次開始錄影時生效。
  • Apex 娛樂模式偵測:新增繁體中文純文字擊殺與助攻提示偵測,並排除本人死亡提示及重複事件。目前已以團隊死鬥影片驗證;其他娛樂玩法與語言尚未驗證。
  • 剪輯預覽:預覽畫面新增播放與全螢幕控制;拖曳時間軸片段邊界時同步預覽對應畫面,靠近邊緣會自動捲動,按 Esc 可取消並還原。
  • 媒體庫與刪片:媒體庫可依錄影或匯入來源篩選。工作室可直接移除影片,匯入影片可選擇是否刪除原檔;移除目前影片後留在工作室,並開啟下一部可用影片。
  • 縮小安裝檔:改用精簡的 LGPL FFmpeg 元件組合,保留錄影、分析與匯出所需功能。

修正

  • 系統音訊擷取:移除以裝置緩衝區容量限制音訊封包的檢查,改依 WASAPI 回報的實際封包長度複製,避免該檢查觸發後系統音訊停止擷取。
  • 分析中刪除影片:刪除前先等待分析程序結束並釋放檔案,避免檔案仍被占用而刪除失敗。
  • Apex 連續積分對局錄影:改善積分畫面辨識,修正連續對局未正確分檔的情況。
  • VALORANT 偵測:改善擊殺列追蹤與玩家標記辨識,降低背景變化、黃色服裝及模糊名稱造成的漏判或重複計數;持續使用畫面偵測。
  • 編輯資料保存:加強錄影分析快取、重新分析及離開工作室時的儲存流程,保留使用者編輯,並在儲存失敗時阻止切換。
  • 擷取隱私:加強遊戲不在前景時的螢幕擷取與備援擷取黑畫面處理。
  • 匯出相容性:統一 MP4/MOV 影片時間刻度,避免部分來源產生過大的時間刻度,影響剪輯軟體相容性。
  • 更新入口:點擊側邊欄的更新提示後,直接開啟設定中的更新控制。

更新方式

  • 0.2.2 至 0.3.2 安裝版可透過自動更新升級。
  • 0.2.0/0.2.1 安裝版請手動下載並執行 Aditor-Setup-0.3.3.exe。
  • 免安裝版請下載 Aditor-0.3.3-Portable.exe 手動更新。

Windows 執行檔未進行程式碼簽章。


New and improved

  • Mouse cursor recording: built-in recording now has a cursor capture setting, enabled by default, for both window capture (WGC) and screen capture (DDA). Changes take effect when the next recording starts.
  • Apex Mixtape detection: adds Traditional Chinese text-only kill and assist detection, with filtering for the player's own death and repeated events. Verified on Team Deathmatch footage; other Mixtape modes and languages remain unverified.
  • Editing preview: adds playback and fullscreen controls over the preview. Dragging a source timeline clip edge previews the corresponding frame and scrolls near the viewport edge. Esc cancels the drag and restores the previous state.
  • Library and removal: filter videos by recording or import source. Remove videos directly in the studio, with a choice to keep or delete imported source files. Removing the current video keeps the studio open and opens the next available video.
  • Smaller downloads: ships a minimal LGPL FFmpeg component set while retaining recording, analysis and export features.

Fixes

  • System audio capture: copies the actual packet length reported by WASAPI instead of rejecting packets based on endpoint buffer capacity, preventing that check from stopping audio capture.
  • Deleting videos during analysis: waits for analysis processes to exit and release their files before deletion, avoiding failures caused by files still being in use.
  • Consecutive Apex ranked recordings: improves ranked-screen recognition so consecutive matches split correctly.
  • VALORANT detection: improves kill-feed tracking and player-marker recognition, reducing missed or repeated events caused by background changes, yellow clothing and unreadable names. Detection remains visual.
  • Saved edits: strengthens recording caches, re-analysis and studio save flows to preserve user edits and block switching when saving fails.
  • Capture privacy: strengthens black-frame handling for screen capture and fallback capture when the game is not in the foreground.
  • Export compatibility: uses a consistent video timescale for MP4/MOV outputs to avoid excessively large source-derived timescales that cause problems in editing software.
  • Update shortcut: the sidebar update notice now opens the update controls in Settings.

How to update

  • 0.2.2 through 0.3.2 installs can upgrade through auto-update.
  • 0.2.0/0.2.1 installs need to download and run Aditor-Setup-0.3.3.exe manually.
  • Portable builds: download Aditor-0.3.3-Portable.exe to update manually.

Windows executables are not code signed.