Skip to content

Releases

v0.4.0 - ultrawide, GamePad touch, Charm Table Fix (experimental)

Choose a tag to compare

@SilversRayGA SilversRayGA released this 11 Nov 04:58

Three new features requested in the issues. All three are experimental: they were checked on our side, but not yet through full play, so please report anything odd.

New (experimental)

Ultrawide: 21:9 and 32:9 (#5). Settings → Display → Aspect ratio: 16:9 (default), 21:9, 32:9, or Auto (follows your window). At the wider ratios the game draws the full width with the same vertical view, so you see more to the sides, and the HUD and menus stay 16:9 in the middle. Checked in the village at 2560x1080 and 3840x1080; hunts, cutscenes and the map screen are untested. The shader cache rebuilds once on the first start (a few seconds).

GamePad touch screen with the mouse, and both controller choices (#6). Cha-Cha now connects a GamePad as well as the Pro Controller, both driven by your keyboard, mouse and controller, so Options → Controller Settings can be set to either. With F3 showing the GamePad screen, holding the left mouse button on it touches the screen, and dragging works (with the small inset, press Esc first to free the mouse). Touches used to land in the wrong place; that's fixed too.
To put the target camera on the main screen: press − to open the field menu → Customize Panels on the GamePad screen → drag the Target Cam panel to the bin → OK, then save.
If your controls behave differently than in 0.3.2, setting the environment variable MH3U_CONTROLLER=pro-only gives the old behaviour; please tell us in an issue if you need it.

Charm Table Fix mod (#8). Optional, off by default: MODS → Mods → Charm Table Fix. MH3U keeps each save on one of 17 fixed "charm tables", five of which ("cursed" tables 11, 12, 15, 16, 17) can never give many talismans. With the mod on, each talisman rolls as if your save were on a random table, with the game's normal odds, so every talisman the game can make is possible on every save. Talismans you already own don't change and your save keeps its own table; switch the mod off and rolls work exactly as before. Table guides and roll-counting don't apply while it's on.

Install / update

Windows: unzip Cha-Cha-0.4.0-windows-x64.zip. To update, copy the new Cha-Cha.exe over the old one, and copy data/mods/charm-table-fix into your data/mods folder to get the new mod. Your saves and settings stay as they are.

Linux: unpack Cha-Cha-0.4.0-linux-x86_64.tar.gz and run ./Cha-Cha (chmod +x Cha-Cha if needed). To update, replace Cha-Cha and lib/, and copy mods/charm-table-fix into your mods/ folder. Your Cha-Cha.ini, game/, save/ and other mods stay.

You still need your own Monster Hunter 3 Ultimate (US) dump with update v32. No game files are included.

Problems or feedback?

These features are new, so feedback is very welcome. Please open an issue at https://github.com/SilversRayGA/Cha-Cha-Plus/issues and attach log.txt (next to the program on Linux, in data/ on Windows). Screenshots help a lot for the ultrawide mode.

v0.3.2 - smoother online hall movement

Choose a tag to compare

@SilversRayGA SilversRayGA released this 10 Nov 06:37

A small online update. Everything else is as in 0.3.1.

Fix

Online: the other hunter lagged behind in the hall (#3). In Port Tanzia's hall, the other player's hunter showed up about 0.7 seconds late and slid for a moment after stopping. The cause was the game's own timing, not the network: it sent each hunter's position only every 20 game ticks and moved the other hunter there over the same 20 ticks. Cha-Cha now uses 4 ticks while you're online, so the other hunter follows within about 0.15 seconds and stops where they stop. Quests weren't affected; the game already syncs them much faster.

Both players need 0.3.2 for the full effect.

Small monsters still appear in different places for each player. The game itself keeps them separate on each copy, so this isn't a bug, but we may look at syncing them later.

Install / update

Windows: unzip Cha-Cha-0.3.2-windows-x64.zip. To update, copy the new Cha-Cha.exe over the old one. Your data folder (saves, settings, mods) stays as it is.

Linux: unpack Cha-Cha-0.3.2-linux-x86_64.tar.gz and run ./Cha-Cha (chmod +x Cha-Cha if needed). To update from 0.3.1, replace Cha-Cha. Your Cha-Cha.ini, game/, save/ and mods/ stay.

You still need your own Monster Hunter 3 Ultimate (US) dump with update v32. No game files are included.

Still having problems?

Please open an issue at https://github.com/SilversRayGA/Cha-Cha-Plus/issues and attach log.txt (next to the program on Linux, in data/ on Windows).

v0.3.1 - start-up fixes for Windows launchers and Linux

Choose a tag to compare

@SilversRayGA SilversRayGA released this 09 Nov 20:43

A hotfix for two start-up problems reported after 0.3.0. Nothing else changed: online play, mods and settings are as in 0.3.0.

Fixes

Windows: instant crash when started from a launcher (#2). When Cha-Cha.exe was started without a console (for example from Quiver or another launcher), it closed right after the game began loading. Cha-Cha sends its messages to log.txt in that case, but the second stream couldn't open the file the first one held, and the first message written to it ended the program. Both now share the file, and a lost log message can no longer close the game. This affected every version of this fork when started that way.

Linux: the program didn't start on many distributions (#1). The Linux build needed the very newest system libraries (glibc 2.43 and FFmpeg 8) because it was built on Fedora 44. It is now built on Ubuntu 22.04 and brings FFmpeg and the libraries it needs in a lib/ folder. It runs on glibc 2.35 or newer: Ubuntu 22.04, Fedora 36, SteamOS 3, Bazzite and later. The download is larger as a result (about 77 MB).

Install / update

Windows: unzip Cha-Cha-0.3.1-windows-x64.zip. To update, copy the new Cha-Cha.exe and SDL3.dll over the old ones. Your data folder (saves, settings, mods) stays as it is.

Linux: unpack Cha-Cha-0.3.1-linux-x86_64.tar.gz and run ./Cha-Cha (chmod +x Cha-Cha if needed). To update an existing folder, replace Cha-Cha and copy the new lib/ folder next to it. Remove the old libSDL3.so.0, libshaderc_shared.so.1 and libSPIRV-Tools*.so next to the program. Your Cha-Cha.ini, game/, save/ and mods/ stay.

You still need your own Monster Hunter 3 Ultimate (US) dump with update v32. No game files are included.

Still having problems?

Please open an issue at https://github.com/SilversRayGA/Cha-Cha-Plus/issues and attach log.txt (next to the program on Linux, in data/ on Windows). A crash dump helps too, as it did for #2.

v0.3.0 - very experimental online play

Choose a tag to compare

@SilversRayGA SilversRayGA released this 09 Nov 14:44

Based on Cha-Cha 0.1.2hf4 by BoyClinton.

New: online play (very experimental)

Hunt with other players, with no Nintendo server and no Cha-Cha server: one player hosts and the copies talk to each other directly.

Warning

This is very experimental and has barely been played. Things will break. Back up your save folder first and expect to restart the game. If you only play alone, nothing changes for you unless you pick the new Online rows at Neko.

Short tutorial

Every player needs this same version of Cha-Cha, their own copy of the game, and a save that has reached Port Tanzia.

  1. Everyone: press F1, go to Gameplay → Online, turn on Play over the network and press Apply. Allow Cha-Cha through your firewall if asked (UDP ports 47800-47807).
  2. Host: in Port Tanzia, talk to Neko and pick Host a Hunt from the Online section of the list. Wait for "Hosting a hunt".
  3. Everyone else: do the same with Join a Hunt. If the game plays its Port Tanzia camera flyover, joining waits for it to finish (about 30 seconds).
  4. Host: choose a quest at the counter in the hall and depart. The others follow.
  5. To leave: pick Leave Online from Neko.

Only play over the network with people you trust: nothing is encrypted, and what other players send goes straight into the game.

Join finds nobody? Add online_host=<the host's IPv4 address> to the settings file (config.ini in the data folder, Cha-Cha.ini in the Linux folder) and restart.

Alone on one PC? Copy your save folder into a new folder, start a second copy with Cha-Cha --data-dir <new folder> and choose your dump. Leave Play over the network off on both, and play one window with the keyboard, because a controller reaches both.

What has and hasn't been tried

  • Played by a person (Linux, two copies on one PC): hosting and joining.
  • Automated tests only: both hunters in the hall, leaving and rejoining, quests together, a large monster moving the same way on both copies, matching damage.
  • Not tried yet: the real quest counter and depart button, carving, rewards, chat, a full hunt, two PCs, three or four players, online on Windows, playing over the internet.

So you may well be the first to try your setup, and that is very useful to know either way.

Please report problems

Open an issue so I can fix it, and also if it worked on a setup listed as not tried. It helps to say:

  • your Cha-Cha version and system
  • one PC or two, and who was hosting
  • what you did, what happened, and what you expected
  • log.txt from the data folder of each copy, if you can

More in the README.

Also new

  • Damage Numbers shows hits in an online session.

Everything from 0.2.4 is still here.

Updating from 0.2.x: replace the program files and keep your data folder.

You need your own MH3U (US) with update v32 — no game files are included.

v0.2.4 - settings in pages, drawn with the game's own textures

Choose a tag to compare

@SilversRayGA SilversRayGA released this 07 Nov 22:58

Based on Cha-Cha 0.1.2hf4 by BoyClinton.

New

  • Settings in pages: one panel with pages down the left: Display, Graphics, Controls, Gameplay, Mods, Quests and System (LB / RB or Q / E change page). Each setting is explained on a parchment page. Quit game is on the System page.
  • Drawn with the game's own GUI textures: wood, gold frames, the menu cursor and the Wii U button icons. They are read from your dump each time Cha-Cha starts; none are included in the download. Before a game is chosen, the menus are drawn plainly.
  • Nintendo layout: button prompts now match a Nintendo pad (right A, bottom B), also on Nintendo-style pads that report Xbox labels.

Everything from 0.2.3 is still here.

Updating from 0.2.x: replace the program files and keep your data folder.

You need your own MH3U (US) with update v32 — no game files are included.

v0.2.3 - upstream 0.1.2hf4: F11, sharp scaling, far-sea fix

Choose a tag to compare

@SilversRayGA SilversRayGA released this 06 Nov 14:18

Based on Cha-Cha 0.1.2hf4 by BoyClinton.

New from upstream (0.1.2hf2 – hf4)

  • F11 switches between fullscreen and a window and frees the mouse; the cursor stays visible after Esc / F11.
  • Settings → Video → Scaling: smooth or sharp.
  • Fixed: diagonal stripes on the far sea in Moga Woods.
  • Quit game in Settings → General while playing (select it twice). It replaces the fork's Exit game button.
  • Wayland / scaled desktops: fullscreen at the real resolution and a sharp window; the picture keeps the correct sRGB colours.
  • Mouse: Stockpile (Moga Forecast tabs, Resource Items) and the Farm's Cultivate and OK buttons.

Everything from 0.2.2 is still here (mods, Select + Options settings, cutscene movie skip with +).

Known: + skips the pre-rendered cutscene movies only. The real-time cutscenes (monster intros and most story scenes) can't be skipped yet.

Updating from 0.2.x: replace the program files and keep your data folder.

You need your own MH3U (US) with update v32 — no game files are included.

v0.2.2 - true attack, key quests, skippable cutscenes

Choose a tag to compare

@SilversRayGA SilversRayGA released this 04 Nov 14:34

Based on Cha-Cha 0.1.2hf by BoyClinton.

New

  • Straight into the game: no launcher menu at the start. Settings over the game with Select + Options on a controller (or F1).
  • Settings: Mods and Quests are tabs next to General, Video and Input. Exit game is in General.
  • Cutscenes can be skipped: press + (Start / Options).
  • True Attack mod (optional, starts off): menus show a weapon's true attack instead of the bloated number. Damage is not changed.
  • Key Quests mod (optional, starts off): a gold key next to the quests that unlock the next urgent quest on the Quest Counter, "2 OF 5" where any few of a group will do, URGENT on urgent quests. Village and Port Tanzia.
  • The Mods page ends with one Save settings / Restore defaults for all mods.

Updating from 0.2.x: replace the program files and keep your data folder. The two new mods are in this download's mods folder (data/mods on Windows): copy true-attack and key-quests into your data folder's mods folder, then switch them on in Settings → Mods.

You need your own MH3U (US) with update v32 — no game files are included.

v0.2.1 - picture fix, working camera speed, upstream 0.1.2

Choose a tag to compare

@SilversRayGA SilversRayGA released this 04 Nov 08:10

Based on Cha-Cha 0.1.2hf by BoyClinton.

Fixed

  • Washed-out, too bright picture ("glare") on Linux / Wayland: Cha-Cha now asks the desktop for the normal sRGB colour space. Before, on some setups (e.g. AMD + KDE) it got a linear wide-gamut one by accident.
  • Camera speed (Settings → Input) now really slows the camera: turning left / right, tilting up / down on land and under water. At low values it no longer stops the camera from moving. Works the same for controller, keys and mouse, and applies right away.

New from upstream (0.1.2 / 0.1.2hf)

  • Mouse pointer in the game's menus (start menu, field menu, item box, shops, Smithy, Quest Counter, Canteen, Farm, quest results, ...)
  • Keyboard defaults like Monster Hunter: World on PC
  • Frame rate fixes: camera turn speed, windpress, grab escape above 30 FPS
  • Menu sounds no longer doubled

Install: see "How to install" in the README. Updating: replace the program files and keep your data folder.

You need your own MH3U (US) with update v32 — no game files are included.

v0.2.0 - mod support, damage numbers and optional features

Choose a tag to compare

@SilversRayGA SilversRayGA released this 02 Nov 12:31

Based on Cha-Cha 0.1.1 by BoyClinton.

New

  • Mod support: mods folder, MODS → Mods tab, content mods and native plugins
    (include/chacha_plugin.h)
  • Damage Numbers mod included (Wilds / Rise / Classic styles)
  • Camera speed setting (Settings → Input)
  • Monster HP scaling can be switched off (Settings → General)

Install: see "How to install" in the README.

You need your own MH3U (US) with update v32 — no game files are included.
Hope you enjoy the game in a similar style like me so you can enjoy this version ^^