Repository navigation
v0.3.7
Windows viewer and firmware 0.3.7.
sutterspeed-viewer.exe: the viewer (no install). Plug in the board and pick its COM port.sutterspeed.hex: firmware. Flash it from the viewer (chip icon, top right) orsutterspeed-viewer --flash sutterspeed.hex.
Changes since 0.3.2
- Shutter measurement: open time from the light rising through the trigger level to falling back through it (on the filtered trace when a filter is set). The trigger looks at a 40 µs average, so fast room-light flicker no longer fires it. Works like SINGLE; the scope screen stays (dimmed) until the pulse comes, ▶ returns to the scope.
- MIN WIDTH knob next to the filter: light has to stay past the level this long to trigger (short flashes and flicker are passed over). 0 = off.
- Trigger works up to 10 ms/div (slower time bases roll live); NORMAL / SINGLE need the trigger on; SINGLE shows the old trace dimmed while it waits.
- Changing the trigger level or edge no longer restarts the capture or clears the screen.
- Stage gains learned from block means;
adcconsole command shows channel statistics and stage ratios. - Viewer: drag the trace up / down, separate A / B cursor buttons, connection icon shows the real link state.