Repository navigation
sutterspeed 0.4.0
Windows viewer and firmware 0.4.0.
sutterspeed-viewer.exe: the viewer (no install). Plug in the board and pick its COM port.sutterspeed.hex: the whole flash image (USB bootloader + firmware). Write it from the viewer (chip icon → Update from GitHub, or pick the file) orsutterspeed-viewer --flash sutterspeed.hex.
Changes since 0.3.8
- USB bootloader on the board: firmware updates need no driver and no STM32CubeProgrammer. Windows binds its own WinUSB driver to the bootloader by itself. An interrupted update leaves the board in the bootloader, ready for the next try.
- Older boards (before 0.4.0) and blank chips are written through the ST system bootloader, the bootloader included. If the PC has no driver for it, the viewer installs Windows' own WinUSB (Windows asks for permission once).
- A blank (factory) chip starts the ST bootloader by itself: plug it in and press Update from GitHub.
- Firmware:
dfurestarts into the board's bootloader,dfu rominto the ST one; the firmware now runs from 0x08003000.
Updating from 0.3.8: Update from GitHub replaces the viewer and writes the new image through the ST bootloader in one go.