Repository navigation
Releases
Kestrel 0.9.41
What's new
- Your accent colour again. 0.9.40 replaced your system's accent with Kestrel's lime, so changing it in Settings › Appearance did nothing. Kestrel follows your accent again, and changes with it straight away. If you liked the lime, pick Preferences › Appearance › Accent colour › Kestrel Lime.
- Install apps by double-click. A
.deb, an.rpmor an AppImage now opens one click-through installer (Next, Install, Open) that shows the app's own name and icon before anything is installed. Packages install through apt, dnf or zypper with everything they need. An AppImage needs no password: it goes to~/Applicationswith its icons and a launcher, updates in place when you open a newer one, and can be uninstalled from the same screen. A package made for another system (an.rpmon Ubuntu, a.debon Fedora) says so and points you to the right download. - Apps in search results. Searching everywhere for a plain word now shows up to four matching apps in a row above the files, so
firefoxfinds Firefox itself, not only files with that name.
Install
Download the file for your system below (64-bit x86 only), open a terminal in the folder you saved it to (usually cd ~/Downloads), and run:
| System | File | Command |
|---|---|---|
| Ubuntu 26.04, Debian 13 (trixie) or newer | kestrel_0.9.41-1_amd64.deb |
sudo apt install ./kestrel_0.9.41-1_amd64.deb |
| Fedora 41 or newer | kestrel-0.9.41-1.x86_64.rpm |
sudo dnf install ./kestrel-0.9.41-1.x86_64.rpm |
| openSUSE Tumbleweed | kestrel-0.9.41-1.x86_64.rpm |
sudo zypper install --allow-unsigned-rpm ./kestrel-0.9.41-1.x86_64.rpm |
| Arch, Manjaro, EndeavourOS, CachyOS | (none to download) | see Arch below |
The ./ matters: it tells the package manager you mean the downloaded file. It fetches everything else Kestrel needs and starts the search service. Upgrading from an older version uses the same command. Indexing a NAS needs cifs-utils (suggested by the package; sudo apt install cifs-utils if it isn't there).
Arch: build the kestrel-bin package from the repo (it repackages this release's .deb, nothing compiles), then turn search on once:
sudo pacman -S --needed git base-devel
git clone --depth 1 https://github.com/Stolly345/kestrel && cd kestrel/packaging/aur
makepkg -si
sudo systemctl enable --now kestrel-indexdDebian: use apt, not dpkg -i. dpkg doesn't download dependencies, so it stops with an error like "libvte-2.91-gtk4-0 … not installed". If that already happened, run sudo apt -f install to finish.
Not supported: Debian 12, Ubuntu before 26.04, Fedora 40 and older, RHEL/Rocky/Alma 9, Arm (their GTK, libadwaita or glibc are too old, or there's no build). RHEL 10 is untested.
Kestrel 0.9.40
What's new
- A look of its own. Kestrel no longer borrows your distro's accent colour. In dark mode it's a blue-black ground with steel-grey text and fine hairlines; light mode is a cool near-white built from the same colours. One lime colour marks what matters: your selection, the search box when it's active, the main button, switches, and how full each drive is (red when it's nearly full). Switch between light and dark in Preferences › Style, or follow the system.
- A new typeface. Kestrel now uses Geologica, a clear, slightly technical sans with tidy figures, so sizes and times line up in the lists. It's installed with Kestrel (free, SIL Open Font License).
- Plainer status text. The status bar reads like a sentence now: "3 results, 39 bytes, found in 5 ms", "Branch master, 4 items, 1 selected".
- Tidier Quick Search. Pinned and recent items sit under their own headings, results show what kind of thing they are (App, Settings, System) on the right, and the keyboard hints are easier to read.
- The terminal panel follows the theme instead of always being black or white.
Install
Download the file for your system below (64-bit x86 only), open a terminal in the folder you saved it to (usually cd ~/Downloads), and run:
| System | File | Command |
|---|---|---|
| Ubuntu 26.04, Debian 13 (trixie) or newer | kestrel_0.9.40-1_amd64.deb |
sudo apt install ./kestrel_0.9.40-1_amd64.deb |
| Fedora 41 or newer | kestrel-0.9.40-1.x86_64.rpm |
sudo dnf install ./kestrel-0.9.40-1.x86_64.rpm |
| openSUSE Tumbleweed | kestrel-0.9.40-1.x86_64.rpm |
sudo zypper install --allow-unsigned-rpm ./kestrel-0.9.40-1.x86_64.rpm |
| Arch, Manjaro, EndeavourOS, CachyOS | (none to download) | see Arch below |
The ./ matters: it tells the package manager you mean the downloaded file. It fetches everything else Kestrel needs and starts the search service. Upgrading from an older version uses the same command. Indexing a NAS needs cifs-utils (suggested by the package; sudo apt install cifs-utils if it isn't there).
Arch: build the kestrel-bin package from the repo (it repackages this release's .deb, nothing compiles), then turn search on once:
sudo pacman -S --needed git base-devel
git clone --depth 1 https://github.com/Stolly345/kestrel && cd kestrel/packaging/aur
makepkg -si
sudo systemctl enable --now kestrel-indexdDebian: use apt, not dpkg -i. dpkg doesn't download dependencies, so it stops with an error like "libvte-2.91-gtk4-0 … not installed". If that already happened, run sudo apt -f install to finish.
Not supported: Debian 12, Ubuntu before 26.04, Fedora 40 and older, RHEL/Rocky/Alma 9, Arm (their GTK, libadwaita or glibc are too old, or there's no build). RHEL 10 is untested.
Kestrel 0.9.39
What's new
- Best match first. Search results now come in order of how well they fit: a file named exactly what you typed comes before one that only contains it, and
OwnerInvoicePdfcounts as starting with "invoice". Files in your own folders (Desktop, Documents, Downloads, projects) rank up; caches,node_modules, build output and hidden folders rank down. Click a column header to sort by it instead. On the command line:ks -s best. - It learns what you open. A result you opened for a search moves to the top the next time you type that search. This history stays on your computer (
~/.config/kestrel/picks.json). - Faster as you type. When a search only gets longer (
repo→repor), Kestrel filters the results it already has instead of searching the whole disk again: 5–7× faster per keystroke, with exactly the same results. - Quick Search. A small search window you can open from anywhere with a shortcut (turn it on in Preferences › Quick Search; Ctrl+Alt+Space by default). It finds apps (by name or initials), files, and GNOME Settings pages (
bluetooth,dark), does sums (2^10 * 3, Enter copies the answer), searches the web (g,ddg,yt,gh,wiki), and can lock, sleep, restart or shut down (restart and shut down ask first). Before you type it shows your pinned and recent items; type?for tips. Also in the right-click menu of Kestrel's icon.
Install
Download the file for your system below (64-bit x86 only), open a terminal in the folder you saved it to (usually cd ~/Downloads), and run:
| System | File | Command |
|---|---|---|
| Ubuntu 26.04, Debian 13 (trixie) or newer | kestrel_0.9.39-1_amd64.deb |
sudo apt install ./kestrel_0.9.39-1_amd64.deb |
| Fedora 41 or newer | kestrel-0.9.39-1.x86_64.rpm |
sudo dnf install ./kestrel-0.9.39-1.x86_64.rpm |
| openSUSE Tumbleweed | kestrel-0.9.39-1.x86_64.rpm |
sudo zypper install --allow-unsigned-rpm ./kestrel-0.9.39-1.x86_64.rpm |
| Arch, Manjaro, EndeavourOS, CachyOS | (none to download) | see Arch below |
The ./ matters: it tells the package manager you mean the downloaded file. It fetches everything else Kestrel needs and starts the search service. Upgrading from an older version uses the same command. Indexing a NAS needs cifs-utils (suggested by the package; sudo apt install cifs-utils if it isn't there).
Arch: build the kestrel-bin package from the repo (it repackages this release's .deb, nothing compiles), then turn search on once:
sudo pacman -S --needed git base-devel
git clone --depth 1 https://github.com/Stolly345/kestrel && cd kestrel/packaging/aur
makepkg -si
sudo systemctl enable --now kestrel-indexdDebian: use apt, not dpkg -i. dpkg doesn't download dependencies, so it stops with an error like "libvte-2.91-gtk4-0 … not installed". If that already happened, run sudo apt -f install to finish.
Not supported: Debian 12, Ubuntu before 26.04, Fedora 40 and older, RHEL/Rocky/Alma 9, Arm (their GTK, libadwaita or glibc are too old, or there's no build). RHEL 10 is untested.
Kestrel 0.9.38
What's new
- Search results you can tell apart. The Name column gets the room now, so files whose names differ near the end (Invoice 2026-09 and Invoice 2026-10) no longer shrink to the same text.
- More room for your files. The tab strip hides while there's only one tab, and when search is off Kestrel says so once, on the search page, with a Start Search Service button. Sidebar sections with nothing in them hide their headings.
- Search Syntax, rewritten. The help is now grouped (words, names, kind, size, dates, contents) with a plain-English meaning beside each example, and clicking an example adds it to the search box. It now also covers
content:,tag:,dupe:andempty:. - Clearer toolbar. On a wide window, Pin, Compress, Extract and View show their names, and greyed-out buttons are clearly off.
- Friendlier dead ends. "Can't open this folder" names the folder and offers Go Back or Open Parent Folder. When a name already exists, Keep Both is the first choice.
- PDF previews fixed. Some PDFs showed their raw source under a squashed page; they now always preview as a page.
- Neater thumbnails. The thin frame now fits the picture itself, so photos and PDF pages no longer sit in a white or black box, in light and dark mode. The terminal panel also gets some breathing room.
Install
Download the file for your system below (64-bit x86 only), open a terminal in the folder you saved it to (usually cd ~/Downloads), and run:
| System | File | Command |
|---|---|---|
| Ubuntu 26.04, Debian 13 (trixie) or newer | kestrel_0.9.38-1_amd64.deb |
sudo apt install ./kestrel_0.9.38-1_amd64.deb |
| Fedora 41 or newer | kestrel-0.9.38-1.x86_64.rpm |
sudo dnf install ./kestrel-0.9.38-1.x86_64.rpm |
| openSUSE Tumbleweed | kestrel-0.9.38-1.x86_64.rpm |
sudo zypper install --allow-unsigned-rpm ./kestrel-0.9.38-1.x86_64.rpm |
| Arch, Manjaro, EndeavourOS, CachyOS | (none to download) | see Arch below |
The ./ matters: it tells the package manager you mean the downloaded file. It fetches everything else Kestrel needs and starts the search service. Upgrading from an older version uses the same command. Indexing a NAS needs cifs-utils (suggested by the package; sudo apt install cifs-utils if it isn't there).
Arch: build the kestrel-bin package from the repo (it repackages this release's .deb, nothing compiles), then turn search on once:
sudo pacman -S --needed git base-devel
git clone --depth 1 https://github.com/Stolly345/kestrel && cd kestrel/packaging/aur
makepkg -si
sudo systemctl enable --now kestrel-indexdDebian: use apt, not dpkg -i. dpkg doesn't download dependencies, so it stops with an error like "libvte-2.91-gtk4-0 … not installed". If that already happened, run sudo apt -f install to finish.
Not supported: Debian 12, Ubuntu before 26.04, Fedora 40 and older, RHEL/Rocky/Alma 9, Arm (their GTK, libadwaita or glibc are too old, or there's no build). RHEL 10 is untested.
Kestrel 0.9.37
What's new
- Search your NAS. On the Network page, a connected Windows (SMB) share now has Index…: type the share's user name and password once and Kestrel lists the whole share, so its files turn up in search like everything else, even while the NAS is switched off. A wrong password changes nothing, and Stop Indexing puts everything back the way it was.
- Live share status. Network › Indexed Shares shows each share's progress as it's listed ("Listing… 20,483 items so far"), when it was last listed, and whether it can be reached.
- NFS and hand-made shares. Any SMB or NFS share in
/etc/fstabwithx-kestrelin its options is indexed too, every 3 hours. Shares without it are never walked, so a big share behind a VPN isn't listed unasked. See the README for an example line. - Faster folder sizes. The Size column works out folder totals much faster at the top of the disk.
- The update notice's button now says View Release, because it opens this page rather than downloading anything.
Install
Download the file for your system below (64-bit x86 only), open a terminal in the folder you saved it to (usually cd ~/Downloads), and run:
| System | File | Command |
|---|---|---|
| Ubuntu 26.04, Debian 13 (trixie) or newer | kestrel_0.9.37-1_amd64.deb |
sudo apt install ./kestrel_0.9.37-1_amd64.deb |
| Fedora 41 or newer | kestrel-0.9.37-1.x86_64.rpm |
sudo dnf install ./kestrel-0.9.37-1.x86_64.rpm |
| openSUSE Tumbleweed | kestrel-0.9.37-1.x86_64.rpm |
sudo zypper install --allow-unsigned-rpm ./kestrel-0.9.37-1.x86_64.rpm |
| Arch, Manjaro, EndeavourOS, CachyOS | (none to download) | see Arch below |
The ./ matters: it tells the package manager you mean the downloaded file. It fetches everything else Kestrel needs and starts the search service. Upgrading from an older version uses the same command. Indexing a NAS needs cifs-utils (suggested by the package; sudo apt install cifs-utils if it isn't there).
Arch: build the kestrel-bin package from the repo (it repackages this release's .deb, nothing compiles), then turn search on once:
sudo pacman -S --needed git base-devel
git clone --depth 1 https://github.com/Stolly345/kestrel && cd kestrel/packaging/aur
makepkg -si
sudo systemctl enable --now kestrel-indexdDebian: use apt, not dpkg -i. dpkg doesn't download dependencies, so it stops with an error like "libvte-2.91-gtk4-0 … not installed". If that already happened, run sudo apt -f install to finish.
Not supported: Debian 12, Ubuntu before 26.04, Fedora 40 and older, RHEL/Rocky/Alma 9, Arm (their GTK, libadwaita or glibc are too old, or there's no build). RHEL 10 is untested.
Tested by installing on Ubuntu 26.04, Debian 13, Fedora 41, Fedora 43 and openSUSE Tumbleweed.
Kestrel 0.9.36
What's new
- Update notice. When a newer version is out, Kestrel shows "Kestrel X.Y.Z is available" with a Download button that opens the release page. It checks once a day by asking GitHub which release is the latest; nothing else is sent. Turn it off in Preferences › System › Check for updates.
- Arch package (
kestrel-bin), see Install below. - Includes everything from 0.9.35: folder sizes in the Size column, the
.rpmpackage, and Debian 13 support.
Install
Download the file for your system below (64-bit x86 only), open a terminal in the folder you saved it to (usually cd ~/Downloads), and run:
| System | File | Command |
|---|---|---|
| Ubuntu 26.04, Debian 13 (trixie) or newer | kestrel_0.9.36-1_amd64.deb |
sudo apt install ./kestrel_0.9.36-1_amd64.deb |
| Fedora 41 or newer | kestrel-0.9.36-1.x86_64.rpm |
sudo dnf install ./kestrel-0.9.36-1.x86_64.rpm |
| openSUSE Tumbleweed | kestrel-0.9.36-1.x86_64.rpm |
sudo zypper install --allow-unsigned-rpm ./kestrel-0.9.36-1.x86_64.rpm |
| Arch, Manjaro, EndeavourOS, CachyOS | (none to download) | see Arch below |
The ./ matters: it tells the package manager you mean the downloaded file. It fetches everything else Kestrel needs and starts the search service. Upgrading from an older version uses the same command.
Arch: build the kestrel-bin package from the repo (it repackages this release's .deb, nothing compiles), then turn search on once:
sudo pacman -S --needed git base-devel
git clone --depth 1 https://github.com/Stolly345/kestrel && cd kestrel/packaging/aur
makepkg -si
sudo systemctl enable --now kestrel-indexdDebian: use apt, not dpkg -i. dpkg doesn't download dependencies, so it stops with an error like "libvte-2.91-gtk4-0 … not installed". If that already happened, run sudo apt -f install to finish.
Not supported: Debian 12, Ubuntu before 26.04, Fedora 40 and older, RHEL/Rocky/Alma 9, Arm (their GTK, libadwaita or glibc are too old, or there's no build). RHEL 10 is untested.
Tested by installing on Ubuntu 26.04, Debian 13, Fedora 41, Fedora 43, openSUSE Tumbleweed and Arch Linux.
Kestrel 0.9.35
What's new
- Folder sizes in the Size column. Folders now show their total size, read from the search index as the rows appear (previously only the preview pane showed it). Folders the index doesn't cover (network shares, unreadable folders) stay blank instead of showing "0 bytes".
- New:
.rpmpackage for Fedora and openSUSE. - Debian 13 is supported with the
.deb(see the note ondpkg -ibelow).
Install
Download the file for your system below (64-bit x86 only), open a terminal in the folder you saved it to (usually cd ~/Downloads), and run:
| System | File | Command |
|---|---|---|
| Ubuntu 26.04, Debian 13 (trixie) or newer | kestrel_0.9.35-1_amd64.deb |
sudo apt install ./kestrel_0.9.35-1_amd64.deb |
| Fedora 41 or newer | kestrel-0.9.35-1.x86_64.rpm |
sudo dnf install ./kestrel-0.9.35-1.x86_64.rpm |
| openSUSE Tumbleweed | kestrel-0.9.35-1.x86_64.rpm |
sudo zypper install --allow-unsigned-rpm ./kestrel-0.9.35-1.x86_64.rpm |
| Arch, Manjaro, EndeavourOS, CachyOS | (none to download) | see Arch below |
The ./ matters: it tells the package manager you mean the downloaded file. It fetches everything else Kestrel needs and starts the search service. Upgrading from an older version uses the same command.
Arch: build the kestrel-bin package from the repo (it repackages this release's .deb, nothing compiles), then turn search on once:
sudo pacman -S --needed git base-devel
git clone --depth 1 https://github.com/Stolly345/kestrel && cd kestrel/packaging/aur
makepkg -si
sudo systemctl enable --now kestrel-indexdDebian: use apt, not dpkg -i. dpkg doesn't download dependencies, so it stops with an error like "libvte-2.91-gtk4-0 … not installed". If that already happened, run sudo apt -f install to finish.
Not supported: Debian 12, Ubuntu before 26.04, Fedora 40 and older, RHEL/Rocky/Alma 9, Arm (their GTK, libadwaita or glibc are too old, or there's no build). RHEL 10 is untested.
Tested by installing on Ubuntu 26.04, Debian 13, Fedora 41, Fedora 43, openSUSE Tumbleweed and Arch Linux.
Kestrel 0.9.34
Instant whole-disk search, built into a GTK4 / libadwaita file manager. For Ubuntu 26.04 (amd64).
Install
Download kestrel_0.9.34-1_amd64.deb below, then:
sudo apt install ./kestrel_0.9.34-1_amd64.debapt pulls in anything missing and starts the index service. To make Kestrel your default file manager, switch it on in Preferences.
What's new in 0.9.34
- Install .deb packages by double-clicking them. A short wizard shows the package, its version and whether it's already installed, then installs it with apt (which fetches any dependencies). It can put the app's icon on your Desktop, and opens the app when it's done. Right-click › Browse Archive still looks inside.
- Open File Location on a search result opens its folder with the file selected.
Recent highlights
- A command bar like Windows Explorer's, icons only, that resizes to stay on one row
- New ▸ Folder, Shortcut, Text, Markdown, Word, Excel, PowerPoint or PDF, opened in your default app
- Open With and Set Default App
- Undo and redo for file operations
- Select mode with checkboxes
See the README for the full feature list.
Kestrel 0.9.33
Instant whole-disk search, built into a GTK4 / libadwaita file manager. For Ubuntu 26.04 (amd64).
Install
Download kestrel_0.9.33-1_amd64.deb below, then:
sudo apt install ./kestrel_0.9.33-1_amd64.debapt pulls in anything missing and starts the index service. To make Kestrel your default file manager, switch it on in Preferences.
What's new in 0.9.33
- Select (checkboxes on every item, with All / None / Invert) moved to the start of the path bar, beside Properties, so the command bar is shorter.
Recent highlights
- A command bar like Windows Explorer's, icons only, that resizes to stay on one row
- New ▸ Folder, Shortcut, Text, Markdown, Word, Excel, PowerPoint or PDF, opened in your default app
- Open With and Set Default App
- Undo and redo for file operations
- Select mode with checkboxes
See the README for the full feature list.