Skip to content

Fermentation Vat

succ edited this page Oct 26, 2026 · 5 revisions

Fermentation Vat

The Fermentation Vat is a multiblock tank that ferments Biomass and Water into Biofuel, the fuel for the Biofuel Engine.

Crafting

Row Items
Top Andesite Alloy, Block of Industrial Iron, Andesite Alloy
Middle Block of Industrial Iron, (empty), Block of Industrial Iron
Bottom Andesite Alloy, Block of Industrial Iron, Andesite Alloy

Building It

Vat blocks join up like Create's Fluid Tanks: place them in a square and stack them up, to a maximum of 3×3 wide and 16 tall. Placing a vat block onto an existing vat fills in the whole layer at once if you have enough blocks.

Minimum working size: a 2×2 footprint, at least 4 blocks tall. Smaller vats can be built but won't ferment. Goggles tell you when it's too small.

How It Works

Pipe in Water and insert Biomass or Biomass Pellets (hopper, funnel or by hand). Pipe Biofuel out of any side.

Each batch takes 20 seconds and uses 1 Biomass per block of footprint (4 for a 2×2, 9 for a 3×3). The Water used and Biofuel made per batch depend on both width and height:

Biofuel per batch = 1,000 mB × width² × (height / 16)^1.5

The same amount of Water goes in as Biofuel comes out.

Vat Biomass per batch Biofuel per batch Biofuel per second Biofuel Engines it can run
2×2, 4 tall 4 500 mB 25 mB 1
2×2, 16 tall 4 4,000 mB 200 mB 8
3×3, 8 tall 9 3,181 mB 159 mB 6
3×3, 16 tall 9 9,000 mB 450 mB 18

Tall vats are far better than short ones, and they don't cost any extra Biomass.

Each vat block holds 8,000 mB of Water and 8,000 mB of Biofuel.

Info

  • Gauges on the sides show the water level.
  • Goggles show the batch size, progress and tanks.
  • It makes a sound while it's fermenting.

Clone this wiki locally