Skip to content

Kinetic Battery

succ edited this page Nov 20, 2026 · 8 revisions

Kinetic Battery

The Kinetic Battery stores rotational force while your network is spinning, and gives it back when you send it a redstone signal. It's the usual partner for an Andesite Solar Panel: charge it by day, run off it at night.

Crafting

Kinetic Battery recipe

How It Works

The battery has two modes, and redstone decides which one it's in:

Redstone What it does
No signal Charges while it's connected to a spinning shaft. Charging puts stress on the network: the same SU it gives back when discharging, so it can't make free power.
Signal Discharges: becomes a generator running at 16 RPM with 256 SU, until it's empty.
Stat Value
Charge time (empty to full) 2 minutes at 16 RPM; faster networks charge it faster (1 minute at 32 RPM)
Stress while charging 16 SU per RPM of the network (256 SU at 16 RPM)
Run time (full to empty) 2 minutes
Output while discharging 16 RPM, 256 SU

A common setup is a Daylight Detector (inverted) or a lever on the battery, so it only discharges when the sun is down.

Info

  • Goggles show the charge percentage and how long it can still run.
  • A comparator reads its charge.
  • It works as a Display Link source (charge %).

All values can be changed in the config under generators.kinetic_battery.

Clone this wiki locally