Skip to content

Steam Turbine

succ edited this page Nov 20, 2026 · 6 revisions

Steam Turbine

The Steam Turbine is a multiblock that burns Steam to make large amounts of rotational force. A full-size one outputs more than a max-size Create steam engine.

Steam can come from a Firebox Boiler, a Solar Power Tower in Steam mode, a Fusion Reactor, or the leftover Steam from a Crystallizer.

Minimum Steam Turbine

Parts

Part How to get it
Turbine Casing Use a Zinc Ingot on a Block of Industrial Iron (by hand or with a Deployer)
Turbine Casing Glass Use Glass on a Turbine Casing. Works exactly like Casing, but you can see inside
Turbine Rotor Crafting: Shaft on top, Turbine Casing, Andesite Alloy, Turbine Casing in the middle, Shaft on the bottom
Andesite Turbine Blade Mechanical Crafting: 6 Andesite Casing (4 in the top row, 2 under the first two) makes 2 blades
Brass Turbine Blade Same shape, with Brass Casing

Turbine Casing Turbine Casing Glass

Turbine Rotor recipe

Andesite Turbine Blade recipe Brass Turbine Blade recipe

Building It

The turbine is a 7×7 tube of Casing built in layers, with a column of Turbine Rotors down the middle. From the bottom up:

  1. Floor: a full 7×7 layer of Casing.
  2. Blade layers (1 to 20): a 7×7 ring of Casing with a Turbine Rotor in the center. Put a Turbine Blade on each of the rotor's four sides (north, south, east and west).
  3. Cap: a 7×7 layer of Casing with one Turbine Rotor in the center. The power comes out of this rotor's shaft.

The smallest working turbine is a floor, one blade layer and a cap. The turbine checks its structure every 2 seconds, and goggles on any rotor tell you if something's missing.

Blades are 2 blocks long. Place the blade in the space next to the rotor; it turns to face the right way by itself.

On Its Side

You can also build the turbine lying down, along the east-west or north-south axis. Build the same layers sideways; it works exactly the same.

Blades and Efficiency

Each arm with a blade adds to the turbine's efficiency:

  • a Brass Blade counts fully;
  • an Andesite Blade counts 70%.

One Brass Blade on every arm gives 100% efficiency. With no blades at all, the turbine runs at 10%. Mixing blade types is fine; efficiency falls in between.

Low efficiency costs you twice: the turbine makes less SU and burns more Steam for it.

Mixed Turbine Blades

Output

Every blade layer adds speed, power and Steam use.

Blade layers Speed Stress capacity (100% efficiency) Steam use
1 16 RPM 8,192 SU 2 mB/t
5 48 RPM 73,728 SU 6 mB/t
7 64 RPM 131,072 SU 8 mB/t
10 64 RPM 180,224 SU 11 mB/t
15 64 RPM 262,144 SU 16 mB/t
20 (max) 64 RPM 344,064 SU 21 mB/t

Speed rises 8 RPM per layer (counting the cap) and tops out at 64 RPM from 7 blade layers up.

If you supply less Steam than the turbine wants, it still runs, but its SU drops to match. Goggles show this as Steam Supply.

A full-size turbine uses half of what one max-size Solar Power Tower makes in Steam mode by day, so with tanks to store the extra, one tower runs it through the night too.

Water

Burnt Steam turns back into Water: 1 mB of Water for every 10 mB of Steam. You have to pipe it out. If the water tank fills up, the turbine stops.

Pipes

Connect pipes to any Casing block. Steam goes in, and Water comes out.

Tank Size
Steam 16,000 mB
Water 8,000 mB

Other Fuels

With Create: CROWNS installed, it also burns CROWNS steam (see Compatibility).

With Create: Northstar Redux installed, the turbine can also burn Liquid Hydrogen, at the same rate as Steam. It can't hold both at once: let the tank run dry before switching fuels.

Other Info

  • Steam is a gas: in a Create Fluid Tank it fills from the top down.
  • While running, the static blades hide and spinning blades are drawn instead.
  • Sneak-right-click any part with a Wrench to pick it up.
  • Advancements: "Steam Powered" for building one, and "Waterlogged" if you let it flood.

Clone this wiki locally