Repository navigation
OpenRDX v1.09
OpenRDX v1.09
OpenRDX 1.09 adds guarded serial-number repair and stronger manufacturing-data
protection.
- Allows a management utility to set a ten-digit unit serial while preserving
other valid manufacturing fields and neighboring flash data. - Requires an explicit fallback initialization when manufacturing data is
completely erased. Partially damaged records are rejected. - Checks the device's expected data before writing and verifies the complete
manufacturing sector afterwards. - Rejects legacy full-chip erase commands. The unprotected compatibility
installer is disabled before it can change the receiver.
The USB serial keeps its existing format: 00 followed by the ten unit digits.
Changing the serial takes effect after a reset. Firmware does not automatically
replace missing manufacturing data with a newly chosen identity.
Use the installation guide for supported
update routes. The serial repair guide
describes required backups, the utility command, and verification limits.
This build remains experimental; the new serial-write flow still requires
physical-device validation.
Download and install
Download OpenRDX-v1-09.zip, extract it into its own directory, and verify the included checksums. Keep the .bin and matching .json manifest together with the other installation files.
Updates require an empty bay, stable power, and exact device selection. Use the installation guide for the selected route. First installation requires a workflow that preserves the receiver's own records; the bundled compatibility installer is disabled. The recovery guide describes the recovery limits.
Supported hardware and limitations
This release targets the Tandberg Data RDX QuikStor external USB 3.0 receiver built around TI TUSB9261. It supports RDX cartridges and qualifying, unlocked standard SATA drives.
Serial repair requires a management utility supporting the new command. Installing 1.09 does not itself restore an erased serial. Explicit fallback initialization restores the chosen serial using the documented default profile; it cannot recover lost per-unit manufacturing data. A private complete-sector backup is required before repair. The new serial-write and re-enumeration flow has not yet been verified on physical hardware.
Source and licensing
Source for v1.09. Created by André Fiedler / SunboX. See the matching license, notices, and commercial licensing information.