Sylnar v1.1.29

New

• Compact redesign (1100×680 by default, resizable down to 1000×560)
  • Sidebar navigation replaces the tabs: Board & Flash, Drivers, DMA Test,
    BAR Probe. Its Hardware card shows the CH347 and FT601 driver status,
    checked in the background at launch, and the footer shows the update
    check result and whether Sylnar runs as Administrator.
  • The log is a dock under every page, with All / Warnings / Errors filters,
    a line count, Copy (copies what the filter shows) and a collapse button.
  • New type: IBM Plex Sans for the interface, JetBrains Mono for IDs,
    addresses and the log (both SIL OFL, bundled in Assets/Fonts).
• Board & Flash: board and firmware side by side. The board card shows
  the part, family, detection time, IDCODE, package, cable and the BSCAN
  bridge used for flashing; the DNA is grouped in fours and Copy confirms
  with "Copied". The firmware card shows the flash mode (SPI flash or SRAM),
  a Bridge · Erase · Write · Done step bar, the live percentage and the
  elapsed time. A .bin or .bit file can be dropped on the card.
• Drivers: CH347 and FT601 drivers side by side (the FT601 driver moved
  here from the DMA tab), each with its device, VID/PID, version, driver,
  a plain-language status and Check / Install / Reinstall / Uninstall.
  "Check both" checks the two at once.
• DMA Test: test type is a segmented control next to Run test. Results
  show a coloured rating banner, six metric tiles (labelled for the stress
  test's own figures) and the rating scale with the reached level lit.
  The memory-map card shows the cache age and where the map is saved.
• BAR Probe: the PCIe device list loads when the page is first opened;
  clicking a row copies its BAR start into Address. Last read shows the hex
  dump with offsets, DWORDs as tiles, or the decoded config header.

Changed

• Cancel is only enabled while it can still take effect (before the SPI
  erase starts), and says so next to the button.
• Splash, update and shutdown windows use the new colours; the update
  window's logo letter is now "S".