Skip to content

v1.13.0

Choose a tag to compare

@SysAdminDoc SysAdminDoc released this 30 Oct 20:03
· 2693 commits to master since this release
Immutable release. Only release title and notes can be modified.

Report on a number's screen or in Lookup now blocks the number on your phone too, with Undo, and the Rules screen can sort its Blocked list and act on many rows at once. Links in WhatsApp, Signal, Gmail and the other chat apps you screen are checked only against the OpenPhish list CallShield keeps on your phone. On Android 15 and later, a one-time code Android hides is left alone, and a code that shows up during a call from an unknown number still gets a warning. Everything that changed is below, and under v1.13.0 in CHANGELOG.md.

Changes

  • Links in WhatsApp, Signal, Gmail and the other chat and email apps you screen now stay on your phone. With "Check links with PhishTank and OpenPhish" turned on, those links only go through the OpenPhish list CallShield downloads, and PhishTank never gets their domain. A flagged one now shows the same "Phishing URL detected" alert as a flagged link in a text, naming the app, in place of the general screened message alert. If a check hits a problem on one of those messages, CallShield no longer saves the message text with its note about it. Links in texting apps like Google Messages are checked the way they were before. When a flagged link there comes from a sender shown by name instead of a number, you now get the phishing alert naming the app too.
  • The Blocked list on the Rules screen can be sorted now. Once you've blocked two or more numbers, chips above the list let you pick Newest first, By number or Most blocked, and CallShield remembers your pick. Most blocked counts the calls and texts it blocked from each number. Numbers blocked before this update have no block time, so they sort last under Newest first.
  • Long-press any row on the Rules screen to pick it, tap others to add them, then Unblock or Delete them all at once. One Undo brings them all back. This works on the Wildcards, Ranges, Keywords and Trusted tabs too, and TalkBack reads how many rows you've picked.
  • On Android 13 and later, copying a number no longer pops a "Copied" message on top of the preview Android shows for everything you copy. The two used to pile up at the bottom of the screen. The FTC complaint button doesn't pop one either now, and the reminder to paste the number into the form sits right under the button. Android 12 and older still show the messages, since nothing else tells you the copy worked there.
  • On the Rules screen, the "Removed from blocklist" bar with its Undo used to cover the Add button, so you couldn't add anything until the bar went away. It now shows just above the button. On the Database tab, which has no Add button, it stays at the bottom.
  • The bar that slides up with Undo and other short messages now uses CallShield's own colors. It's off-white with a green Undo in the dark themes and navy with a mint Undo in Light, instead of Android's stock lavender and purple.
  • More of CallShield's short messages now fit at the largest font size. Android 12 and later cut a toast off after two lines, so the endings of the error, undo, export and "no browser" messages never showed, and neither did most of the one about emergency numbers. They're shorter now in English and Chinese. The copy messages on the blocked list and the FTC report no longer repeat the number, since a long number alone could fill a line. The FTC one still tells you to paste it in the form. "That didn't go through. Try again." has a Chinese translation now too.
  • When Not spam on a blocked call alert runs into your own block, the notification that explains it now stays with CallShield's other blocked call alerts. It used to show up as a separate card, and it could replace a newer alert for the same number that arrived while Not spam was being checked. A number too long to be a phone number no longer offers Not spam at all. There's nothing to allow there, and the old message blamed a block you never made.
  • The "Possible spam" popup no longer flashes up for a moment on a call that CallShield then rejects. It used to open while the call was still being checked, so a later check that rejected the call left it on screen until it was taken back. Now it waits until the call is going to ring, or go to silent voicemail, and a rejected call never shows it.
  • With TalkBack on and a large font size, the bottom tabs other than the open one had no name for TalkBack to read. At 150% and up the bar shows just the open tab's label, and the others now read their names from their icons. At normal sizes each tab still reads its name once.
  • Tapping Not spam on a blocked call alert for a number you blocked yourself now shows a short "Your own block still applies." and turns the alert into a notification that explains why. Tap it and the number opens in CallShield, where you can remove the block. The old message was a toast, and Android 12 and later cut it off after two lines, so the part about where to remove the block never showed. The Not spam and empty crash log messages are shorter too, so they fit at the largest font size.
  • The caller ID popup no longer stays up for 20 seconds after CallShield rejects a call it first showed as possible spam. A rejected call never rings, so nothing told the popup the call was over, and it kept offering Block for a call that was already gone. It closes as soon as the call is rejected now.
  • A call that came in at the moment the previous caller's popup closed could lose its own popup. Closing the old popup shut the popup service down even though the next call's request was already waiting.
  • When Android stops asking for a permission or a default app role, CallShield's note about where to turn it on now shows in full at the bottom of the screen, with an Open App info or Open Default apps button. It used to be a toast that Android 12 and later cut off after two lines, and the settings page opened on top of it before you could read the rest. The note stays put if you switch tabs or turn the phone while it's showing.
  • A single Not spam vote no longer keeps a number off the community watch list for 90 days. Reports from people on later days count again, so a number that starts getting reported after someone vouched for it can still show the warning. Reports from the day of the vote, or earlier, still don't count.
  • A Report or Not spam result that came in just as the previous message closed, in Lookup or on a number's screen, could be skipped without showing. It shows now.
  • When GitHub's rate limit stops a report, the report service now passes on how long GitHub asked it to wait, instead of always saying a minute. When GitHub refuses the service's access token, it answers that it's unavailable rather than rate limited, and the app keeps the report and tries again later.
  • The update notice on Home can't be swapped back to an older release anymore. A mirror serving an older signed notice used to replace the newer one, which could hide an update.
  • Regex rules shaped like a long run of optional digits, or a repeated group that ends in an optional part, are now turned down when you add them, since they could hold up call screening. One saved earlier in such a shape no longer runs.
  • Turning the phone while Not spam waits out its Undo, or while Report is still going out, no longer loses the message that follows. Report's Undo for the block stays too.
  • A number you block, unblock or report while the spam database is updating keeps that change when the update finishes. A change made just before the update wrote its rows could be put back the way it was.
  • Texts from a regular phone number that ends in 7726 get screened again. CallShield leaves the 7726 carrier spam report short code alone, but it also skipped every full number ending in those four digits, so a blocked or known spam number like that was never checked, logged or flagged.
  • If checking a text runs into an error, CallShield still lets the text through and now leaves a warning in the system log. Before, nothing recorded that the check had failed.
  • Community reports that arrive without the app's report id now count as one reporter between them, per number and day. The app has sent that id with every report since v1.10.0. On 2026-10-30 a script that sent none reported the same few numbers from a new network each time, and each one counted as a different person. The rule covers the watch list, promotion into the database, the trending list, spam link domains and Not spam votes. Reports from builds older than v1.10.0 still count, but together they make one reporter.
  • On Android 15 and later, Android hides a one-time code from apps like CallShield and puts "Sensitive notification content hidden" where the message was. CallShield screened that placeholder as if it were the text. It now leaves those notifications alone, so it never removes or logs one, and it warns you when a hidden code arrives during or just after a call from an unknown number, the way it already did for a code it could read. The placeholder is matched in your phone's language.
  • The spam report form on GitHub now says up front that it files a public note, and that Report on a number's screen in the app is what sends the anonymous report that counts. It used to say a report there could go in the database, but issues were never read into it.
  • Report on a number's screen now blocks the number on your phone too, and the message after it says so, with Undo to take the block back off. The report itself stays sent. One report rarely blocks a number for everyone, so you kept getting the calls unless you also tapped Block. A number you'd blocked already keeps its block exactly as it was.
  • Lookup's result card now offers to block the number's whole area code, with Undo, the same way a number's own screen does. Before, you had to scroll down and open the full detail to find it.
  • Report spam number on the More tab now opens Lookup on an empty number field, ready to type, where Report sends the anonymous report that counts. Until now it opened the GitHub form, which files a public issue instead.
  • New scripts/device_smoke.py runs the release's phone checks over adb and prints PASS or FAIL for each one. They cover sync, What's new, the recommended lists, both area code offers with Undo, a number with no offer, Not spam's Undo and More's Report spam number. --report adds Report's block and Undo, and it sends a real report.
  • Lookup now offers Report on every number you check. It only showed for a number something had already flagged, so the new number you came from More to report left you with Block and Mark trusted. Report in Lookup works like Report on a number's screen: it blocks the number on your phone too, with Undo.
  • Reporting a number nothing had flagged sent the report with a blank type. It goes as spam now, and the block it adds on your phone says spam too, not Other.
  • Undo after deleting a rule puts back exactly what was there. A rule you'd switched off came back switched on, and a temporary allow came back for good.
  • Search shows an error with Retry when the first page of results fails to load. Before, it showed an empty list, as if nothing matched.
  • With TalkBack, the checkbox and switch rows in the blocklist dialogs, backup sections and update checks read their label with the control, and tapping anywhere on the row toggles it. Each row stays at least 48dp tall. Settings links and rule conflicts are announced as buttons.
  • A few labels read more clearly now. The allow-list range offer reads "Let its whole block of lines through too", and Lookup's checker names "Trusted numbers" and "CallShield blocklist".
  • The wildcard dialog now refuses a regex that call screening would skip as too slow to run, like (\d{3}){3}, and suggests the simple form. It used to save the rule, show it as active, and never match a call with it.
  • A text blocklist with a comment after a number on the same line (+15551234567 # 3 reports) read the comment's digits as part of the number, and a comma in that comment could make the whole list read as CSV. Lists that start with a byte-order mark also lost a JSON list's format, its own refresh interval, or a CSV list's first column name.
  • The restore preview said a settings restore leaves out subscription URLs. It doesn't. It adds the backup's external blocklists and keeps the ones already on the phone, and the preview now says so.
  • A restore leaves a number's existing allow or block on this phone alone, unless the phone's is temporary and the backup's is permanent. Restoring a backup's block deleted any allow the phone had for that number, emergency allows included, and a backup's plain allow could clear an emergency flag or make a permanent allow temporary. Merge has no Undo, so the change stuck. The preview now counts these numbers among its matches and says what happens to them.
  • Blocking or unblocking a number from a downloaded list while a database sync was fetching its updated parts could be undone when the sync finished. It's kept now.
  • A block decision waits at most a quarter second for its call-log entry to be saved, then blocks the call and saves the entry after. When another database write was running, like a sync, that wait could push the block past Android's five-second limit, and the call rang.
  • The app now refuses the community watch list if it's served in place of the trending numbers feed. Both are signed and both list numbers, so a mirror could have passed one off as the other, turning numbers with a single report into blocked ones.
  • A failed link check on an RCS or chat message can no longer crash the app.
  • A database or storage error during a tap (a block, an allow, a rule, a setting) no longer closes the app. You get a "Something went wrong" message and can try again.
  • The community report merge counts one phone once a day per number, whichever spam type it picks. Picking a different type each time let one phone count up to nine times a day toward the trending list. A not-spam report still counts on its own. Reports of one number that land within a minute of each other are folded together the same way, by spam or not spam instead of by type.
  • A report the report service turns away (a number that can't exist, or one it already has) no longer uses up one of the 30 reports a minute it takes from everyone, so a flood of bad reports can't crowd out real ones.
  • One report can now block a number for everyone when an FCC complaint from the last 90 days names the same number as the caller and doesn't say it was spoofed. Before, it took reports from several people on different days, so nearly every report expired after 30 days without blocking anything.
  • Lookup's This is not spam and Mark trusted now wait five seconds with an Undo before the number goes on your allow list and the not-spam report goes out, the way Not spam on a number's screen already did. Not spam on two numbers in a row sends both now, where the second used to cancel the first without a word. Each screen shows only the result of its own tap.
  • The Chinese translation's regex example in the wildcard dialog showed with its backslashes missing.
  • Setup now spots a copy installed by an app store or installer that doesn't let Android allow SMS and call logs. Android never asks about those on such a copy, and their switches in App info flip back to Deny with no reason given. Once you've tried them, setup names the installer and offers Get the APK, which opens the latest release so you can install it over your copy from the Files app. Your settings stay. The README's troubleshooting section now covers this block next to restricted settings.
  • Database v61 adds the FCC complaints published through 2026-10-30 and FTC's through 2026-10-29, for 51,407 numbers, and refreshes the 649 French telemarketing ranges. 24 of the numbers are ones a single person reported that a recent FCC complaint also names. The community watch list now carries 2 numbers that several people reported. Five came off it. +1 501-794-4158, +1 863-865-7795 and +1 895-746-5363 were foreign numbers the report service had misread, and every report of +86 138 0013 8000 and +86 133 9213 5190 came from a script that sent no report id, so each now counts as one reporter.
  • The Simplified Chinese translation now covers nearly every screen, with 311 more strings and every plural, from aixtin (#42). Only the new setup note about reinstalling from GitHub, and its Get the APK button, still show in English.
  • The Android post-call screen has a Call back button (#43). It opens your dialer with the number filled in, so a call that dropped is one tap from a redial and CallShield still needs no permission to place calls.
  • Spam on the post-call screen now records the block and the report itself, and the home screen widget redraws itself when your lists change. Both used to hand the job to the app's own receiver with a broadcast, which Android 17 QPR2 no longer delivers once the app has left the screen, so the block could have been lost.
  • Block area code no longer offers China's +86 410 or +86 413. The newest phone numbering data the offer is built from (libphonenumber 9.0.42) doesn't list them as area codes anymore.
  • The app no longer closes as it starts when it can't read whether update checks are on. It skips setting up the weekly check that time and tries again on the next start.
  • A database error while a screen is open no longer closes the app either. The screen keeps what it was showing, or its empty state if nothing had loaded yet, and the error is logged. If the app's settings can't be read at all, it opens to the main screen instead of a blank one.
  • With TalkBack on, the count tiles on Home, More and Activity now read each number with its label, like "7, Today". TalkBack used to read every number in the row first and every label after, so you couldn't tell which count was which. Each entry on the Rules screen's Database tab is one stop now too, with its number, type and report count read together.
  • Appearance on the More tab opens the theme picker right there. Before, it opened Settings at the top, with the Theme row further down and out of sight.
  • Restoring a backup keeps when each number was blocked, so the Blocked list's Newest sort comes back in the same order. Backups made before this restore those blocks with the time of the restore.
  • The Recent tab shows how CallShield handled each call when it came in. It used to check every number again when the list loaded, so a call you answered from a number you blocked later showed up as Spam and counted toward the Spam total. Now only calls CallShield blocked count as Spam, and an earlier call from a number flagged since says "Flagged after this call" along with the reason.
  • TalkBack reads chips where only one can be on as radio buttons, selected or not selected. That covers the Activity and Recent filters, the Rules sort and Database filters, Lookup's Number and Message switch, the log cleanup days and the category actions. They used to say "Check box", which sounded like you could pick several. The Blocked log's Reason filter reads as a drop-down list.
  • On a phone with two SIMs, the caller ID popup for a call on the second SIM closed the moment it opened. It went by the main SIM's call state, and that reads idle while the other SIM rings. The popup now watches each SIM and closes once every one of them is idle, the same way an outgoing call's warning does.
  • On a phone with two SIMs, Answer and hang up now rejects a spam call when either SIM is roaming. Android doesn't tell call screening apps which SIM a call came in on, so CallShield only checked the main one, and a call on a roaming second SIM could get answered abroad, where answering can cost you.
  • The report service now takes a number sent without a + only when it has ten digits, read as a US or Canadian number. Any other bare length is turned away, since nothing says which country it's from. A Chinese mobile sent as 15017944158 was being stored as +1 501-794-4158, a line in Arkansas, and could end up on the watch list. The import scripts for North American feeds still read a bare 1 plus ten digits as +1.
  • The community report merge and the watch list now set aside reports from before that fix that were most likely misread that way. That's a +1 number whose +86 reading is already a known number, or one in an area code no phone line uses that didn't come from the app. A number already in the database or approved by hand is never set aside, and neither is a report from after the fix.

Data

  • Database v61 holds 51,407 numbers and 668 number ranges, 649 of them French telemarketing ranges. It adds the FCC complaints published through October 30 and the FTC's through October 29.
  • The community watch list counts a number's reporters the new way, so two numbers whose reports all came without a report ID dropped off it.

Installing

Download CallShield-v1.13.0.apk below and install it over your current version. Releases since v1.7.37 share one signing key, so the update keeps your settings and blocklist.

Signer certificate SHA-256:

92:0E:58:3A:E6:CE:9F:38:63:A6:B3:B8:84:7E:92:7D:53:A6:6C:38:A2:45:E1:2E:30:CE:12:4C:9F:4A:75:F5

What was checked

2,134 JVM unit tests and the 24 data pipeline suites pass, along with lint, detekt, ktlint and the release build's drift, SBOM and reproducibility checks. The 134 instrumented tests, database migrations included, pass on a Galaxy S22 with Android 16. On that phone I installed 1.12.0 fresh, went through setup and synced the database (51,407 numbers), then installed this APK over it. Setup, the synced database and CallShield's call screening role all carried over, with no crash. The in-app changelog shows 1.13.0, and Settings lists the same four recommended lists as before. A Paris number offers to block all +33 1 numbers, both in Lookup and on the number's screen, and Undo takes the rule back off. A Japanese number gets no offer at all. Not spam followed by Undo sent nothing. Report spam number in More opens Lookup. Report on a number from the FCC complaints now says it's blocked on this phone, and Undo lifts the block. The report itself reached the community queue a second later. The phone has no SIM, so no real call or text was screened.