TCS DLSS5 V5

Required

1. ReShade with add-on support, and a decent NVIDIA GPU (RTX 50 series highly recommended).
2. Part 1 from my Nexus profile: https://www.nexusmods.com/profile/TheChadSurvivor
3. RTX 40 or 50 series — RTX 30 and below run at about 1 FPS.

Installation

1. Install ReShade with add-on support. Sell your soul for a good NVIDIA GPU (50 series highly recommended).
   ReShade Home
2. Apply any widescreen patches for KotOR 1.
3. Install Part 1. Choose the pack for your card and drop the contents inside "Move Inside Content to Game Folder" into your game folder.
   https://www.nexusmods.com/profile/TheChadSurvivor
4. Install Part 2. Choose the pack for your card and drop the contents inside "Move Inside Content to Game Folder" into your game folder.
5. Run the game. For KotOR 2, the resolution can look wrong at first: set it again in Options (e.g. 1080p).
   A small window will pop up. That is the feeder (another layer). Leave it.
6. Open the ReShade menu (Home), go to the Add-ons tab, open the DLSS 5 tray, enable it.
7. Click Show DLSS 5 panel or press N to open the TCS Developer Controls panel.
8. Enable DLSS ON and make sure Feed is also enabled.
9. Click Apply to host near the bottom of the panel (it reads Applied once the host has taken the settings).
10. Done. Adjust it to your heart's content.

Please note: if you have a 30 series GPU or below, this will run very, very slow (like 1 FPS).

Packs

• TCS DLSS5 V5 GitHub 40-50 Series PART2.zip — RTX 40 / 50 ← use this
• TCS DLSS5 V5 GitHub 20-30 Series PART2.zip — RTX 30 — Slow

Credits

Heavy credit to DLSS5-Feeder. MIT covers TCS packaging and feeder-derived code only; NVIDIA, ReShade, RenoDX, and LumeniteFX keep their own licenses. See README and LICENSE.

Developer Controls panel: OptiScaler DLSSNR dlss5-ui-v1.

TCS DLSS5 V4

Required

1. ReShade with add-on support, and a decent NVIDIA GPU (RTX 50 series highly recommended).
2. Part 1 from my Nexus profile: https://www.nexusmods.com/profile/TheChadSurvivor
3. RTX 40 or 50 series — RTX 30 and below run at about 1 FPS.

Installation

1. Install ReShade with add-on support. Sell your soul for a good NVIDIA GPU (50 series highly recommended).
   ReShade Home
2. Apply any widescreen patches for KotOR 1.
3. Install Part 1. Choose the pack for your card and drop the contents inside "Move Inside Content to Game Folder" into your game folder.
   https://www.nexusmods.com/profile/TheChadSurvivor
4. Install Part 2. Choose the pack for your card and drop the contents inside "Move Inside Content to Game Folder" into your game folder.
5. Run the game. For KotOR 2, the resolution can look wrong at first: set it again in Options (e.g. 1080p).
   A small window will pop up. That is the feeder (another layer). Leave it.
6. Open the ReShade menu (Home), go to DLSS 5, enable it and neural rendering.
7. Done. Adjust it to your heart's content.

Please note: if you have a 30 series GPU or below, this will run very, very slow (like 1 FPS).

Packs

• TCS DLSS5 V4 GitHub 40-50 Series PART2.zip — RTX 40 / 50 ← use this
• TCS DLSS5 V4 GitHub 20-30 Series PART2.zip — RTX 30 — Slow

Credits

Heavy credit to DLSS5-Feeder. MIT covers TCS packaging and feeder-derived code only; NVIDIA, ReShade, RenoDX, and LumeniteFX keep their own licenses. See README and LICENSE.

TCS DLSS5 V3

Required

1. ReShade with add-on support, and a decent NVIDIA GPU (RTX 50 series highly recommended).
2. Part 1 from my Nexus profile: https://www.nexusmods.com/profile/TheChadSurvivor
3. RTX 40 or 50 series — RTX 30 and below run at about 1 FPS.

Installation

1. Install ReShade with add-on support. Sell your soul for a good NVIDIA GPU (50 series highly recommended).
   ReShade Home
2. Apply any widescreen patches for KotOR 1.
3. Install Part 1. Choose the pack for your card and drop the contents inside "Move Inside Content to Game Folder" into your game folder.
   https://www.nexusmods.com/profile/TheChadSurvivor
4. Install Part 2. Choose the pack for your card and drop the contents inside "Move Inside Content to Game Folder" into your game folder.
5. Run the game. For KotOR 2, the resolution can look wrong at first: set it again in Options (e.g. 1080p).
   A small window will pop up. That is the feeder (another layer). Leave it.
6. Open the ReShade menu (Home), go to DLSS 5, enable it and neural rendering.
7. Done. Adjust it to your heart's content.

Please note: if you have a 30 series GPU or below, this will run very, very slow (like 1 FPS).

Packs

• TCS DLSS5 V3 GitHub 40-50 Series PART2.zip — RTX 40 / 50 ← use this
• TCS DLSS5 V3 GitHub 20-30 Series PART2.zip — RTX 30 — Slow

Credits

Heavy credit to DLSS5-Feeder. MIT covers TCS packaging and feeder-derived code only; NVIDIA, ReShade, RenoDX, and LumeniteFX keep their own licenses. See README and LICENSE.

TCS DLSS5 V2

Required

1. ReShade with add-on support, and a decent NVIDIA GPU (RTX 50 series highly recommended).
2. Part 1 from my Nexus profile: https://www.nexusmods.com/profile/TheChadSurvivor
3. RTX 40 or 50 series — RTX 30 and below run at about 1 FPS.

Installation

1. Install ReShade with add-on support. Sell your soul for a good NVIDIA GPU (50 series highly recommended).
   ReShade Home
2. Apply any widescreen patches for KotOR 1.
3. Install Part 1. Choose the pack for your card and drop the contents inside "Move Inside Content to Game Folder" into your game folder.
   https://www.nexusmods.com/profile/TheChadSurvivor
4. Install Part 2. Choose the pack for your card and drop the contents inside "Move Inside Content to Game Folder" into your game folder.
5. Run the game. For KotOR 2, the resolution can look wrong at first: set it again in Options (e.g. 1080p).
   A small window will pop up. That is the feeder (another layer). Leave it.
6. Open the ReShade menu (Home), go to DLSS 5, enable it and neural rendering.
7. Done. Adjust it to your heart's content.

Please note: if you have a 30 series GPU or below, this will run very, very slow (like 1 FPS).

Packs

• TCS DLSS5 V2 GitHub 40-50 Series PART1.zip — RTX 40 / 50 ← use this
• TCS DLSS5 V2 GitHub 20-30 Series PART2.zip — RTX 30 — Slow

Credits

Heavy credit to DLSS5-Feeder. MIT covers TCS packaging and feeder-derived code only; NVIDIA, ReShade, RenoDX, and LumeniteFX keep their own licenses. See README and LICENSE.

TCS K1-2 DLSS5

Required

1. ReShade with add-on support, and a decent NVIDIA GPU (RTX 50 series highly recommended).
2. Part 1 from my Nexus profile: https://www.nexusmods.com/profile/TheChadSurvivor
3. RTX 40 or 50 series — RTX 30 and below run at about 1 FPS.

Installation

1. Install ReShade with add-on support. Sell your soul for a good NVIDIA GPU (50 series highly recommended).
   ReShade Home
2. Apply any widescreen patches for KotOR 1.
3. Install Part 1. Choose the pack for your card and drop the contents inside "Move Inside Content to Game Folder" into your game folder.
   https://www.nexusmods.com/profile/TheChadSurvivor
4. Install Part 2. Choose the pack for your card and drop the contents inside "Move Inside Content to Game Folder" into your game folder.
5. Run the game. For KotOR 2, the resolution can look wrong at first: set it again in Options (e.g. 1080p).
   A small window will pop up. That is the feeder (another layer). Leave it.
6. Open the ReShade menu (Home), go to DLSS 5, enable it and neural rendering.
7. Done. Adjust it to your heart's content.

Please note: if you have a 30 series GPU or below, this will run very, very slow (like 1 FPS).

Packs

• TCS K1-2 DLSS5 RTX 40 and 50 GIT.zip — RTX 40 / 50 ← use this
• TCS K1-2 DLSS5 RTX 30 GIT.zip — RTX 30 — ~1 FPS, not recommended

Credits

Heavy credit to DLSS5-Feeder. MIT covers TCS packaging and feeder-derived code only; NVIDIA, ReShade, RenoDX, and LumeniteFX keep their own licenses. See README and LICENSE.