PocketOBI v2.7.0: Traditional Chinese

Traditional Chinese in the Asia build.

Added

• Traditional Chinese in the Asia build (Settings > Language > TW), with Taiwan character forms, translated by a Taiwanese user (#38). Thanks to @yukonx for the translation! The "Connecting..." banner was added after the spreadsheet used for the translation, so its wording (連接中...) is ours and provisional: corrections welcome.

Only the Asia build changes; the other builds are the same as v2.6.0 apart from the version number. No change to the reading, the verdicts or the PC bridge: the PackScope companion app needs no update.

Known issue

Flashing a .bin by hand at 0x0 resets the saved settings (language, screen flip, touch calibration). The web flasher keeps them unless you tick "Erase device". After a manual flash, set them again (on a touch board: Tools > Settings > Calibrate touch).

Full changelog: CHANGELOG.md.

Which file do I flash?

Hardware	English / French / German / Spanish	Asia: English / Japanese / Korean / Vietnamese / Chinese (Simplified and Traditional)
ESP32-C3 SuperMini + ST7789 + EC11 encoder (reference)	PocketOBI-v2.7.0-esp32-c3.bin	PocketOBI-v2.7.0-esp32-c3-asia.bin
CYD ESP32-2432S028R (touch)	PocketOBI-v2.7.0-cyd.bin	PocketOBI-v2.7.0-cyd-asia.bin
CYD with an ILI9341 screen (mirrored image on the plain CYD build)	PocketOBI-v2.7.0-cyd-ili9341.bin	build from source with CYD_ILI9341
ES3C28P (ESP32-S3, capacitive touch)	PocketOBI-v2.7.0-es3c28p.bin (+ Vietnamese)	build from source

Easiest: the web flasher, from Chrome or Edge, nothing to install. Or by hand: each .bin is a merged image (bootloader + partitions + app), flashed at address 0x0.

pip install esptool
esptool --chip esp32c3 write_flash 0x0 PocketOBI-v2.7.0-esp32-c3.bin
esptool --chip esp32   write_flash 0x0 PocketOBI-v2.7.0-cyd.bin
esptool --chip esp32s3 write_flash 0x0 PocketOBI-v2.7.0-es3c28p.bin

If a CYD flash stops halfway ("chip stopped responding"), add --baud 115200. If the ES3C28P is not detected, hold BOOT, press RESET, then release BOOT. SHA-256 checksums are in SHA256SUMS.txt. The *-parts.zip files hold the separate images and their offsets (OFFSETS.txt).

Never connect the pack's B+ (18 V) to the ESP32.