Skip to content

Releases

YabaSanshiro NX 1.3.3

Choose a tag to compare

@Thorhax Thorhax released this 16 Nov 22:51

❤️This port is, and always will be, free and open. No paywalls, no locked builds.

It's built in my spare time: reverse engineering, debugging on real hardware,
and a lot of late nights. If it's been useful to you, support helps me spend
more time on it and on future recomps.

🎯 Current goal: $300/month — lets me dedicate an extra weekend each month to recomp work.

If this project helped you out, consider buying me a coffee on Ko-fi or supporting on Patreon to support future updates!

Fixes

  • Fighters Megamix: slow motion and input lag. Since 1.3.0 the game was forced onto the slower interpreter
    CPU core, which charged every memory access as if the Saturn's CPU cache didn't exist, so matches ran at
    about 44% speed while the overlay still showed 60 fps. Fighters Megamix now runs on the dynamic recompiler
    with the emulator's built-in BIOS (set automatically, US and Japanese releases) and matches play at full speed.
  • Fighters Megamix: random freezes at boot. The emulator started the second CPU about ten times faster than
    a real Saturn, whose BIOS takes a while to boot it. The game could then read a half-written command and stop.
    The second CPU now starts with hardware-like timing.
  • Interpreter CPU core speed. Work RAM accesses are now charged like on the dynamic recompiler (cached
    accesses are cheap), so games on the interpreter run noticeably faster.

Known issue

  • Fighters Megamix: glitching on the fighters' heads and torsos. Some polygons are misplaced and sometimes
    have the wrong colour (for example a green face on Akira). It happens on both CPU cores and in every polygon
    mode. Not fixed yet; the game is fully playable.
  • Fighters Megamix crashing when a match loads: turn off Rotating background on GPU in the game's Video
    settings (it is off by default).

Tested on hardware (1785 MHz)

Fighters Megamix (1P matches, full speed), Burning Rangers, Bulk Slash, Policenauts (English and Japanese),
Deep Fear (Europe and Japan), each with both CPU cores and with a real BIOS and the built-in BIOS. The
default settings (dynamic recompiler, BIOS auto) are the best choice for all of them.

Notes

  • The CPU must be overclocked to 1785 MHz for full speed in demanding games.
  • Fighters Megamix always uses the built-in BIOS, even when a real BIOS is selected: with a real BIOS it can
    still freeze at boot on the dynamic recompiler.

Install: extract the zip to the root of the SD card (or replace switch/yabasanshiro/yabasanshiro.nro).

YabaSanshiro NX 1.3.2

Choose a tag to compare

@Thorhax Thorhax released this 16 Nov 11:49

❤️This port is, and always will be, free and open. No paywalls, no locked builds.

It's built in my spare time: reverse engineering, debugging on real hardware,
and a lot of late nights. If it's been useful to you, support helps me spend
more time on it and on future recomps.

🎯 Current goal: $300/month — lets me dedicate an extra weekend each month to recomp work.

If this project helped you out, consider buying me a coffee on Ko-fi or supporting on Patreon to support future updates!

Fixes

  • Deep Fear: background sound hisses in a loop (with or without a BIOS). The emulated CD drive restarted
    its seek whenever the game extended a running read, so the streamed ambience never reached its loop point:
    it played the end of the file (the hiss) and restarted every few seconds. Streams now loop cleanly.
  • Deep Fear with a real BIOS: black opening movie and a broken character model with trails. The game clears
    a graphics command by copying from address 0, which on real hardware reads as zeros. With a real BIOS loaded
    the emulator copied the BIOS instead. Fixed.
  • Fighters Megamix: black screen after the intro with a real BIOS. During a screen-mode change the game
    hands the second CPU its work queue in a slightly different form than its own library does, and with a real
    BIOS the second CPU could read a half-written command and stop for good. Fighters Megamix now gets a small
    built-in fix (US and Japanese releases). It could also happen, more rarely, without a BIOS.
  • A CPU restarted in the middle of a frame could freeze emulation in some timing setups.

Tested on hardware (1785 MHz)

Deep Fear (Europe and Japan, with and without BIOS: opening movie, first scene, ambience),
Fighters Megamix (intro to title, real BIOS and built-in BIOS), Bulk Slash (stage 1): full speed.

Notes

  • The CPU must be overclocked to 1785 MHz for full speed in demanding games.
  • Fighters Megamix keeps running on the interpreter CPU core (set automatically); it runs at full speed.

Install: extract the zip to the root of the SD card (or replace switch/yabasanshiro/yabasanshiro.nro).

YabaSanshiro NX 1.3.1

Choose a tag to compare

@Thorhax Thorhax released this 11 Nov 06:34

❤️This port is, and always will be, free and open. No paywalls, no locked builds.

It's built in my spare time: reverse engineering, debugging on real hardware,
and a lot of late nights. If it's been useful to you, support helps me spend
more time on it and on future recomps.

🎯 Current goal: $300/month — lets me dedicate an extra weekend each month to recomp work.

If this project helped you out, consider buying me a coffee on Ko-fi or supporting on Patreon to support future updates!

Fixes

  • Policenauts: repeating voice lines and subtitles that vanish after a second (#2). The emulator charged
    the CPU far too much time for every write to video memory. Policenauts' movie player writes every decoded
    pixel that way, so its movies ran at about 75% speed: the streamed audio looped stale data (the repeated
    line endings) and the subtitles, which follow the movie, were cut short. Movies now play at full speed with
    their sound in step. Tested with the English-patched and the Japanese disc 1.
    Other games whose movie players or graphics code write a lot to video memory may also run faster where they
    were slow before.

Tested on hardware (1785 MHz)

Policenauts (English patch and Japanese, opening movies and first scene), Burning Rangers (mission 1),
Bulk Slash (stage 1), Fighters Megamix (intro, title): full speed.
Not tested: Deep Fear (reported in #2 with a looping background sound; it may have the same cause).

Notes

  • The CPU must be overclocked to 1785 MHz for full speed in demanding games.

Install: extract the zip to the root of the SD card (or replace switch/yabasanshiro/yabasanshiro.nro).

YabaSanshiro NX 1.3.0

Choose a tag to compare

@Thorhax Thorhax released this 08 Nov 23:03

❤️This port is, and always will be, free and open. No paywalls, no locked builds.

It's built in my spare time: reverse engineering, debugging on real hardware,
and a lot of late nights. If it's been useful to you, support helps me spend
more time on it and on future recomps.

🎯 Current goal: $300/month — lets me dedicate an extra weekend each month to recomp work.

If this project helped you out, consider buying me a coffee on Ko-fi or supporting on Patreon to support future updates!

Sound

  • Fixed the frame limiter in 1.2.1/1.2.2, which stopped limiting whenever a game was running
    ahead: games ran at 90-120 fps and the sound overflowed (the "severe audio" reports).
  • New sound output: talks to the Switch's audio service directly, keeps its buffer level steady,
    and when a game runs below full speed (or stalls while loading) it stretches the sound at the
    same pitch instead of stuttering. At full speed the sound passes through unchanged.
  • Save states now keep the sound CPU's registers (they never did: loading a state could leave the
    sound stuck in a short loop or silent). States from older versions restart the sound CPU.

Speed

  • Burning Rangers mission 1: 45 fps -> 60 fps. The SH-2 recompiler allocated memory for every
    instruction it compiled, which games that keep rewriting their code paid for every frame.
  • The emulation thread no longer waits while each frame is composited, or for the sound CPU at
    the end of every frame.
  • Threads are kept on their own cores (SH-2s, renderer, sound CPU).

Fixes

  • Games started from the launcher ran display-paced (each frame waited for a display buffer
    after the launcher had used the screen); the launcher now starts the game in a fresh copy of
    the app, like a HOME Menu shortcut, and the game gets its full speed headroom.
  • Returning to the launcher from a game that used the CPU rotating background hung (the
    watchdog then closed the app).
  • Bulk Slash froze at the start of stage 1: the GPU rotating background is now off by default
    (setting renamed, so it is off for everyone; it can be turned back on in Video settings).
  • Fighters Megamix never got past its intro: it now runs on the SH-2 interpreter automatically
    (full speed).
  • The SH-2 recompiler raises illegal-instruction exceptions at the right address.

Tested on hardware (1785 MHz)

Burning Rangers (training, mission 1), Fighters Megamix (intro, title, demo fight), Bulk Slash
(title, stage 1): 60 fps; a 7-minute Burning Rangers mission 1 run had 4 brief sound underruns in total.

Notes

  • The CPU must be overclocked to 1785 MHz for full speed.
  • Save states made with older versions still load, but the game may stay silent until its next
    sound or music starts.
  • Not yet tested: USB drives, SMB shares, disc change, PAL games.

Install: extract the zip to the root of the SD card (or replace switch/yabasanshiro/yabasanshiro.nro).

YabaSanshiro NX 1.2.1

YabaSanshiro NX 1.2.1 Pre-release
Pre-release

Choose a tag to compare

@Thorhax Thorhax released this 16 Oct 06:44

Important: overclock the CPU to 1785 MHz

Set the Switch's CPU to 1785 MHz (with sys-clk or a similar tool) before playing. At the stock clock many games won't hold full speed.

Fixed: stutter from frame pacing

  • Games ran at 61 fps instead of 60, so a 60 Hz screen dropped a frame every second. This was very visible as a regular hitch in scrolling scenes and FMVs (for example the Magic Knight Rayearth intro). Games now run at 60 fps.
  • With vsync on, the speed limiter could make a frame miss the screen refresh, which caused slowdowns such as Albert Odyssey dropping to 51–56 fps. The limiter no longer waits when a frame is already late.

The log (switch/yabasanshiro/log.txt) now also shows late frames and how long each frame waits for the screen. If a game still stutters, please open an issue with log.txt and log.prev.txt.

Tip: if a game freezes

Turn off Rotating background on GPU in that game's Video settings. Sonic R freezes when loading a race with it on and runs fine with it off.

Installing

Extract yabasanshiro-nx-1.2.1.zip to the root of the SD card (or copy yabasanshiro.nro over the old one in switch/yabasanshiro/). Your games, BIOS files, cheats, settings and saves are kept. See the README for the BIOS list, controls and cheats.

❤️ Enjoying the port?
If this project helped you out, consider buying me a coffee on Ko-fi or supporting on Patreon to support future updates!

Support on Ko-fi Support on Patreon

YabaSanshiro NX 1.2.0

Choose a tag to compare

@Thorhax Thorhax released this 01 Oct 10:48

❤️ Enjoying the port?
If this project helped you out, consider buying me a coffee on Ko-fi or supporting on Patreon to support future updates!

Important: overclock the CPU to 1785 MHz

Set the Switch's CPU to 1785 MHz (with sys-clk or a similar tool) before playing. At the stock clock many games won't hold full speed.

New: aspect ratio in the quick menu

The quick menu (Minus + Plus) has an Aspect ratio row: press left / right (or A) to switch between 4:3 (TV), square pixels, 16:9 and stretch.

  • The new ratio shows as soon as you resume the game.
  • It's saved as that game's own setting, the same one as on the game's Video settings page, so the game starts with it next time. Other games and the global setting aren't changed.

Tip: if a game freezes

Turn off Rotating background on GPU in that game's Video settings. Sonic R freezes when loading a race with it on and runs fine with it off.

Installing

Extract yabasanshiro-nx-1.2.0.zip to the root of the SD card (or copy yabasanshiro.nro over the old one in switch/yabasanshiro/). Your games, BIOS files, cheats, settings and saves are kept. See the README for the BIOS list, controls and cheats.

Not tested yet but likely works fine

USB drives, SMB shares, changing discs and docking or undocking during a game are included but haven't been tried on a Switch yet. If something doesn't work, please open an issue with switch/yabasanshiro/log.txt and log.prev.txt.

YabaSanshiro NX 1.1.0

Choose a tag to compare

@Thorhax Thorhax released this 30 Sep 11:31

Important: overclock the CPU to 1785 MHz

Set the Switch's CPU to 1785 MHz (with sys-clk or a similar tool) before playing. At the stock clock many games won't hold full speed.

New: cheats

The quick menu (Minus + Plus) has a new Cheats page for Action Replay / GameShark codes.

  • A turns a cheat on or off, Y types in a new code with the keyboard (for example 1602E8F0 0063, several joined with +), X twice deletes one. Changes are saved right away and kept for next time.
  • RetroArch's Saturn cheat files work as they are. Copy the .cht files into switch/yabasanshiro/cheats/ (or a Sega - Saturn subfolder inside it). A file is found by the disc image's name (Die Hard Arcade (USA).cht for Die Hard Arcade (USA).chd) or by the disc's product code. The Cheats page shows which names it looks for.
  • Supported code types: 1 (16-bit write), 3 (8-bit write) and D (conditional). Master codes aren't needed and are ignored; cheats using other code types are shown as n/a.
  • Turning a cheat off stops it, but values it already changed stay until the game changes them.

Fixes

  • Conditional (D) codes that didn't match stopped every cheat listed after them from working; now they only skip the code that follows them.

Installing

Extract yabasanshiro-nx-1.1.0.zip to the root of the SD card (or copy yabasanshiro.nro over the old one in switch/yabasanshiro/). Your games, BIOS files, settings and saves are kept. See the README for the BIOS list, controls and cheats.

Not tested yet but likely works fine

USB drives, SMB shares, changing discs and docking or undocking during a game are included but haven't been tried on a Switch yet. If something doesn't work, please open an issue with switch/yabasanshiro/log.txt and log.prev.txt.

YabaSanshiro NX 1.0.1

Choose a tag to compare

@Thorhax Thorhax released this 30 Sep 09:47

Important: overclock the CPU to 1785 MHz

Set the Switch's CPU to 1785 MHz (with sys-clk or a similar tool) before playing. At the stock clock many games won't hold full speed.

Fixes

  • Burning Rangers no longer crashes when a level loads, and now runs at nearly full speed (it can still dip during big explosions). This also fixes any other game that reads the Saturn's rendered picture back with the CPU.
  • HOME Menu shortcuts are now created without background gameplay recording. The system recorder crashed Atmosphère while a game was running slowly. Shortcuts made with 1.0.0 keep recording on until you re-create them.

Installing

Extract yabasanshiro-nx-1.0.1.zip to the root of the SD card (or copy yabasanshiro.nro over the old one in switch/yabasanshiro/). Your games, BIOS files, settings and saves are kept. See the README for the BIOS list and controls.

Not yet tested yet but likely works fine.

USB drives, SMB shares, changing discs and docking or undocking during a game are included but haven't been tried on a Switch yet. If something doesn't work, please open an issue with switch/yabasanshiro/log.txt and log.prev.txt.

YabaSanshiro NX 1.0.0

Choose a tag to compare

@Thorhax Thorhax released this 30 Sep 07:16

First release of YabaSanshiro NX, a standalone Sega Saturn emulator for the Switch built on devMiyax's YabaSanshiro, with a launcher adapted from NaGa's Dolphin NX frontend.

Installing

Extract yabasanshiro-nx-1.0.0.zip to the root of the SD card (or copy yabasanshiro.nro to switch/yabasanshiro/). Put games in switch/yabasanshiro/games/ and BIOS files in switch/yabasanshiro/bios/, then start YabaSanshiro NX from the homebrew menu. See the README for the BIOS list and controls.

Highlights

  • Full-speed emulation with the SH-2 dynarec and OpenGL renderer; 1080p docked, 720p handheld
  • Launcher with cover art (import or SteamGridDB), collections, file manager and per-game settings
  • .cue/.bin, .chd, .iso, .ccd, .mds from SD, USB drives or SMB shares
  • HOME Menu shortcuts (need signature patches)
  • Quick menu (Minus + Plus): save states, disc change, FPS counter, reset
  • Saturn pad, 3D pad, Virtual On Twin Stick or no controller, per player and per game
  • Japanese or US/European BIOS picked by disc region, or chosen per game

Not yet tested on hardware

USB drives, SMB shares, changing discs and docking or undocking during a game are included but haven't been tried on a Switch yet. If something doesn't work, please open an issue with switch/yabasanshiro/log.txt and log.prev.txt.