Skip to content

Releases

G-PCB 1.0.11

Choose a tag to compare

@ToxaToxaToxa ToxaToxaToxa released this 22 Nov 13:35

Support and links.

  • Stats → About has WhatsApp support and ♥ Donate buttons. The WhatsApp chat opens with your G-PCB version already written in.
  • Links to GitHub and other sites open in your browser again, instead of a bare G-PCB window.

G-PCB is free. If it saved you a trip to a board house, you can support it through the Monobank jar. Website: g-pcb.com.

Windows x64 installer, not code-signed: SmartScreen may warn — More info → Run anyway.

G-PCB 1.0.10

Choose a tag to compare

@ToxaToxaToxa ToxaToxaToxa released this 22 Nov 13:17

The wizard now shows the machine.

The steps at the machine are scenes: a rendered CNC 3018 fills the step, and the settings sit right on it.

  • Blank & array — the blank lies on the bed at true scale with your boards on it. Enter its width and height right on the dimension lines.
  • Work zero — a close-up of the bit over the blank corner for X0 Y0, then of the probe clips for Z0, with the buttons next to them.
  • Height map — the probe points lie on the copper and take colour as they are probed.
  • Run — the current program's toolpaths are drawn on the blank, with the program list beside it.

To report a problem, use Stats → Github or open an issue.

Windows x64 installer, not code-signed: SmartScreen may warn — More info → Run anyway.

G-PCB 1.0.9

Choose a tag to compare

@ToxaToxaToxa ToxaToxaToxa released this 22 Nov 12:05

See what to do at the machine.

The PCB wizard now shows rendered pictures of a CNC 3018 on the machine steps:

  • Blank & array — the copper-clad blank clamped on the bed, boards planned on the copper.
  • Work zero — X0 Y0 at the lower-left corner of the blank, and the probe clips for Z0: one on the bit, one on the copper.
  • Height map — the probe touching the copper point by point.
  • Run — the bit change between programs.

The pictures use only the free space of the step, so nothing scrolls; a click opens a picture full size.

To report a problem, use Stats → Github or open an issue.

Windows x64 installer, not code-signed: SmartScreen may warn — More info → Run anyway.

G-PCB 1.0.8

Choose a tag to compare

@ToxaToxaToxa ToxaToxaToxa released this 22 Nov 10:40

Check for updates whenever you like.

  • Stats → About has a Check for updates button. It answers "Up to date" too, and when a new version is out it opens the update window at once, without restarting G-PCB.
  • The About page now describes G-PCB, with credit to gSender and its team.

To report a problem, use Stats → Github or open an issue.

Windows x64 installer, not code-signed: SmartScreen may warn — More info → Run anyway.

G-PCB 1.0.7

Choose a tag to compare

@ToxaToxaToxa ToxaToxaToxa released this 22 Nov 09:40

Clearer height map probing when something goes wrong.

  • If the controller stops answering during height map probing, G-PCB now stops and tells you to check the USB cable and reset the controller, instead of waiting forever.
  • When probing stops on an alarm, the wizard explains the cause (the probe did not touch the copper, the probe was already closed, a limit was reached) and offers Unlock or Reset controller right on the step.
  • While Z0 or the height map is being probed, the wizard stays on that step, so the probe results are not lost.

To report a problem, use Stats → Github or open an issue.

Windows x64 installer, not code-signed: SmartScreen may warn — More info → Run anyway.

G-PCB 1.0.6

Choose a tag to compare

@ToxaToxaToxa ToxaToxaToxa released this 22 Nov 08:58

Crash fix, found through a crash report.

  • No crash when you close G-PCB right after the machine was sent commands, for example during height map probing. The port closes cleanly instead of ending G-PCB with an error.

To report a problem, use Stats → Github or open an issue.

Windows x64 installer, not code-signed: SmartScreen may warn — More info → Run anyway.

G-PCB 1.0.5

Choose a tag to compare

@ToxaToxaToxa ToxaToxaToxa released this 12 Nov 16:49

Two crash fixes, both found through crash reports.

  • No crash when you disconnect from a machine connected over Ethernet (telnet).
  • No crash when you close G-PCB while connected to a machine: the port is now closed before G-PCB exits.

Thank you to everyone whose crash reports made these fixes possible. To report a problem, use Stats → Github or open an issue.

Windows x64 installer, not code-signed: SmartScreen may warn — More info → Run anyway.

G-PCB 1.0.4

Choose a tag to compare

@ToxaToxaToxa ToxaToxaToxa released this 06 Oct 07:17

You will no longer miss an update.

  • When a new G-PCB version is out, a window shows what changed, with Update and Later. It never appears while a job is running, and updating is blocked until the job ends, because installing restarts G-PCB.
  • The update page and the GitHub links in Stats now point to G-PCB. To report a problem, use Stats → Github or open an issue.

Includes the 1.0.3 fix: no crash when a machine is unreachable over Ethernet.

Windows x64 installer, not code-signed: SmartScreen may warn — More info → Run anyway.

G-PCB 1.0.3

Choose a tag to compare

@ToxaToxaToxa ToxaToxaToxa released this 06 Oct 04:37

Fixes a crash when connecting over Ethernet.

If the machine could not be reached over the network (for example connect ENETUNREACH 192.168.5.1:23 with no cable or the wrong network), G-PCB closed completely. Now the connection error is shown and G-PCB stays open, so you can check the cable or the IP address and connect again.

This bug was found through a crash report — thank you to whoever hit it.

Windows x64 installer, not code-signed: SmartScreen may warn — More info → Run anyway. Installed copies offer this update on their next start.

Found a problem? Please open an issue and tell us what you were doing.

G-PCB 1.0.2

Choose a tag to compare

@ToxaToxaToxa ToxaToxaToxa released this 27 Sep 20:32

Safety and reliability fixes from a code review of the PCB wizard. Recommended for everyone.

  • Start only with the right file: a program can be started only when the loaded file is its current G-code. An isolation program loaded before the height map was probed can no longer run without the correction.
  • Z0 for the right bit: Z0 is recorded for the bit that was actually probed, even if another program was selected while probing.
  • Settings kept after a restart: tools, drills, blank, stage order and probe settings were reset on every start.
  • Height map notes shown: toolpath points outside the probed area and moves that could not be compensated are listed in the Plan and Run steps.
  • Plan changes during a job: "done" stays only on unchanged programs; if the isolation area moved, the wizard asks for a new height map and Z0.
  • No boards past the blank: a fixed board array that does not fit is cut down to the boards that fit.
  • Height map tool: no invalid X NaN moves in relative (G91) mode after an unreadable arc.
  • No usage statistics consent dialog, since this build collects no statistics.

Windows x64 installer, not code-signed: SmartScreen may warn — More info → Run anyway. Installed copies offer this update on their next start.