Repository navigation
Releases
v1.5.0: Your Second Monitor, Only When You Need It
What's new
-
Disconnect the virtual monitor when you are done. Previously, stopping streaming left the virtual monitor active in Windows, so windows could remain on a display you were no longer viewing. Disconnect monitor removes it from the active desktop, letting Windows move those windows onto your remaining displays. In a two-monitor setup, they return to your main monitor.
-
Connect and start streaming in one click. Press Connect monitor to restore the virtual monitor and start streaming automatically. You no longer need to leave an unused virtual desktop active between sessions.
-
Automatic reconnect on launch. If your saved secondary monitor is disconnected, opening Second Monitor reconnects it and starts streaming automatically. This also works when Start streaming when opened is unchecked. If the monitor is already connected, that setting still controls automatic streaming.
-
Remembered resolution and position. Your monitor returns with its last active resolution and desktop position, including after closing and reopening the app.
Changes from v1.4.1
-
One Connect monitor / Disconnect monitor toggle replaces the manual Open tablet app and Close tablet app buttons, alongside Start and Stop.
-
Stop ends streaming while keeping the monitor active. Disconnect monitor stops streaming and removes the monitor from the active Windows desktop.
-
Monitor connection changes use generic Windows DisplayConfig APIs, without driver-specific commands. Disconnecting does not uninstall the virtual display driver.
-
The primary display is protected. Other active displays keep their existing configuration, and streaming stops before the selected secondary display disconnects.
-
The monitor selector filters out unused Windows display sources and duplicate entries while keeping available disconnected monitors listed for reconnection.
-
Saved layouts follow the monitor's Windows device identity rather than its display number, helping preserve the correct selection when display numbers change.
-
Automatic tablet opening and closing still follow their checkboxes. Tray behavior and shutdown protection remain supported.
-
The tablet APK is unchanged. If the tablet app is already installed, you do not need to reinstall it for this update.
Installing
Before updating: right-click the Second Monitor icon in the system tray and select Exit. Closing the window may leave the old version running.
With the installer (recommended):
- Download and run
SecondMonitorSetup-1.5.exe. - Leave Install missing required programs with winget ticked. Setup checks for the .NET 10 Desktop Runtime, ffmpeg, adb, and the Virtual Display Driver.
- Plug in your tablet, enable USB debugging, and accept the Allow USB debugging? prompt.
- If the tablet app is not installed, select Install tablet app over USB on Setup's final page. You can also use the Install tablet app (USB) shortcut in the Start menu later.
- Open Second Monitor from the Start menu or desktop shortcut.
Without the installer: download SecondMonitor.exe and, if needed, SecondMonitor.apk. Install the PC requirements by hand as described in the README. Keep all accompanying files together if using a folder-style PC build.
Using the new monitor controls
- Select your secondary monitor.
- Set its desired resolution and desktop position in Windows Display settings while Second Monitor is running.
- Press Disconnect monitor when you are done. Streaming stops, the display leaves the active desktop, and Windows moves its windows onto the remaining displays.
- Press Connect monitor when you need it again. Its saved layout is restored, and streaming starts automatically.
The program remembers layouts in %APPDATA%\SecondMonitor\monitor-layouts.json. If an older version already lost your layout, set it once while v1.5 is running so it can remember it.
Windows manages window placement after a display disconnects. With multiple remaining displays, windows may move to a display other than the primary.
Recommended settings
- Screen capture: GPU capture
- Video encoder: CPU - libx264
- Frame rate: 60 FPS
- Bitrate: 8000 kbit/s
GPU capture and GPU encoding are separate options: you can capture the screen with the GPU while encoding with the CPU.
If GPU capture cannot find your monitor, produces a black screen, or fails to start, switch to Standard capture. Performance varies with the PC, graphics driver, and tablet.
Notes
-
The installer needs administrator rights. Windows will ask for permission.
-
Internet access and
wingetare needed to install missing dependencies automatically. If automatic installation fails, Setup lists the programs to install by hand. -
The Virtual Display Driver installer may show its own security prompts or request a restart.
-
USB debugging must be enabled and authorized on the tablet. Setup cannot accept that permission on your behalf.
-
Connecting a monitor configures an existing display target; it does not install a virtual display driver.
-
If Windows rejects a saved layout after your desktop configuration changes, the program reports the failure rather than changing your other displays.
-
The installer is unsigned, so Windows may display a SmartScreen warning.
-
Uninstalling removes Second Monitor but leaves its dependencies installed, since other software may use them.
Files
SecondMonitorSetup-1.5.exe: recommended Windows installer, including the tablet APK and USB installation helperSecondMonitor.apk: tablet app for Android 5.0 or newer; unchanged from the previous releaseSecondMonitor.exe: PC program for manual installation; requires the dependencies listed in the README
v1.4.1: Fix adb.exe shutdown error
Fixes
- Fixed an issue that could cause an
adb.exeerror message when shutting down Windows.
v1.4.0: Lower latency and easier setup
What's new
-
Lower streaming delay. Delay is now about 60–110 ms at 1280×800, 60 FPS on the tested setup. The PC sends each encoded picture without waiting for the next picture to arrive.
-
Automatic USB recovery. If setting up the USB connection fails, the program retries automatically, even when the tablet stays plugged in. The manual Fix USB button has been removed.
-
Check setup button. Checks ffmpeg, the selected encoder, the selected monitor, adb authorization, and whether the tablet app is installed. Results and troubleshooting instructions appear in the log.
Changes from v1.3.0
-
Starting and stopping streaming now uses separate sessions, preventing leftover work from an old connection from interfering with a new one.
-
The window stays responsive while streaming stops. If closing the tablet app is enabled, the program finishes that operation before allowing another Start.
-
Moving or resizing the selected monitor causes the stream to reconnect with updated dimensions. If the monitor disappears, the program waits for it to return.
-
Invalid touch messages are ignored instead of ending the connection. Touch coordinates are kept within the selected screen.
-
GPU capture with CPU/libx264 encoding is now the recommended setup for the tested hardware. Standard capture remains available as a compatibility fallback.
-
The installer build now uses Inno Setup 7 and produces a native x64 setup executable. Its final page also offers an optional Install tablet app over USB action.
-
The tablet APK is unchanged. If the tablet app is already installed, you do not need to reinstall it for this update.
Installing
With the installer (recommended):
- Download and run
SecondMonitorSetup-1.4.0.exe. - Leave Install missing required programs with winget ticked. Setup checks for the .NET 10 Desktop Runtime, ffmpeg, adb, and the Virtual Display Driver.
- Plug in your tablet, enable USB debugging, and accept the Allow USB debugging? prompt.
- If the tablet app is not installed, select Install tablet app over USB on Setup's final page. You can also use the Install tablet app (USB) shortcut in the Start menu later.
- Open Second Monitor from the Start menu or desktop shortcut.
Without the installer: download SecondMonitor.exe and, if needed, SecondMonitor.apk. Install the PC requirements by hand as described in the README. Keep all accompanying files together if using a folder-style PC build.
Recommended settings
- Screen capture: GPU capture
- Video encoder: CPU - libx264
- Frame rate: 60 FPS
- Bitrate: 8000 kbit/s
GPU capture and GPU encoding are separate options: you can capture the screen with the GPU while encoding with the CPU.
If GPU capture cannot find your monitor, produces a black screen, or fails to start, switch to Standard capture. Performance varies with the PC, graphics driver, and tablet.
Notes
-
The installer needs administrator rights. Windows will ask for permission.
-
Internet access and
wingetare needed to install missing dependencies automatically. If automatic installation fails, Setup lists the programs to install by hand. -
The Virtual Display Driver installer may show its own security prompts or request a restart.
-
USB debugging must be enabled and authorized on the tablet. Setup cannot accept that permission on your behalf.
-
The installer is unsigned, so Windows may display a SmartScreen warning.
-
Uninstalling removes Second Monitor but leaves its dependencies installed, since other software may use them.
Files
SecondMonitorSetup-1.4.0.exe: recommended Windows installer, including the tablet APK and USB installation helperSecondMonitor.apk: tablet app for Android 5.0 or newer; unchanged from the previous releaseSecondMonitor.exe: PC program for manual installation; requires the dependencies listed in the README
v1.3.0: Windows installer
What's new
-
Windows installer.
SecondMonitorSetup-1.3.0.exeinstalls Second Monitor intoProgram Files, adds Start menu and optional desktop shortcuts, and can be removed from Windows' Apps list. Installing a newer version upgrades the old one. -
Installs the programs Second Monitor needs. The installer checks for the .NET 10 Desktop Runtime, ffmpeg, adb (Android platform-tools) and the Virtual Display Driver. If you leave the option ticked, it installs the missing ones with
winget. Programs that
are already on your PC are skipped. -
Tablet app included. The installer adds a Start menu shortcut, Install tablet app (USB), that sends
SecondMonitor.apkto your tablet over USB. You can also install the APK by hand as before.
Changes from v1.2.1
-
Settings are now saved in
%APPDATA%\SecondMonitor\settings.txtinstead of next to the program, becauseProgram Filesis not writable for normal users. Your oldsettings.txtnext to the exe is still read once, so you do not lose your choices. -
The program now finds ffmpeg and adb itself: in its own folder, in PATH and in winget's shortcut folders. This helps right after the installer adds them.
-
Streaming, touch input, encoders and capture are unchanged.
Installing
With the installer (recommended):
- Download and run
SecondMonitorSetup-1.3.0.exe. - Leave Install any missing required programs ticked.
- Plug in your tablet (USB debugging on) and use the Install tablet app (USB) shortcut in the
Start menu, or installSecondMonitor.apkyourself.
Without the installer: download SecondMonitor.exe and SecondMonitor.apk, and install the
requirements by hand (see the README).
Notes
-
Windows may show a "Windows protected your PC" (SmartScreen) warning, because the installer is not signed. Choose More info, then Run anyway.
-
The installer needs administrator rights, mainly for the driver. Windows will ask for permission.
-
wingetmust be available to install the missing programs automatically. If it is not found, the installer tells you which programs to install by hand. -
The Virtual Display Driver installer may show its own Windows security prompts.
-
Uninstalling removes Second Monitor but leaves the programs above, since other software may use them.
Files
SecondMonitorSetup-1.3.0.exe: the installerSecondMonitor.apk: the tablet app (Android 5.0 or newer)SecondMonitor.exe: the PC program on its own (needs .NET 10 Desktop Runtime, ffmpeg and adb; see the README)
v1.2.1
What's new
-
The tablet app closes by itself when the PC goes away. If the PC shuts down, the program closes or the cable is pulled, the tablet app no longer stays open and frozen. It closes after 10 seconds without a connection.
-
Only one copy of the program runs. Opening
SecondMonitor.exeagain no longer adds another tray icon. The new copy closes itself and shows the window of the copy that is already running, even if that one is hidden in the tray.
Changes from v1.2.0
-
The tablet app closes itself if it was connected to the PC and the connection is lost for more than 10 seconds. If the PC comes back sooner (for example the cable is replugged), it reconnects as before.
-
The goodbye message the PC sends at shutdown now has a little more time to reach the tablet.
-
A second launch of the program asks the running copy to show its window, then exits.
-
Streaming, touch input, encoders and capture are unchanged, so delay and frame rate are the
same as in v1.2.0.
Upgrading
Update both files together: install the new SecondMonitor.apk on the tablet and replace SecondMonitor.exe on the PC.
-
Old APK with the new exe: the one-copy fix works, but the tablet app does not close itself when the PC goes away.
-
New APK with an old exe: the tablet app closes itself, but you can still end up with several copies of the program.
If you still have extra copies running from an older version, close them once (tray icon menu, Exit, or Task Manager).
Notes
-
If the tablet app was opened before you pressed Start on the PC, it keeps waiting and does not close. It only closes after it has been connected at least once.
-
After the tablet app closes, plugging the tablet in again reopens it if Open tablet app automatically is ticked.
Files
SecondMonitor.apk: the tablet app (Android 5.0 or newer)SecondMonitor.exe: the PC program (needs the .NET 10 Desktop Runtime, ffmpeg and adb; see the README)
v1.2.0
What's new
- Clean shutdown. When Windows shuts down or you log off, the program no longer shows an
adb.exeerror, and the tablet app now closes by itself. - Custom icon. The program has its own icon, used for
SecondMonitor.exe, the window and the
system tray. Developers can swap it by replacingpc/icon.icobefore building.
Changes from v1.1.0
- The program stops starting
adbas soon as Windows begins shutting down. Windows cannot start
new programs at that point, which caused theadb.exeerror. - The PC now tells the tablet app to close itself through the video connection, so this works
withoutadb. This happens at shutdown every time, and on Stop or exit when
Close tablet app when stopped is ticked. - Streaming, touch input, encoders and capture are unchanged, so delay and frame rate are the
same as in v1.1.0.
Upgrading
Update both files together: install the new SecondMonitor.apk on the tablet and replace
SecondMonitor.exe on the PC.
- New APK with an old exe: works as before, but the tablet app does not close by itself.
- Old APK with the new exe: works, but the tablet app does not close by itself. It reconnects
later instead.
Notes
- The tray icon may be hidden under the ^ arrow near the clock. Drag it out to keep it visible.
- Windows can keep showing the old icon on the exe until its icon cache refreshes.
Files
SecondMonitor.apk: the tablet app (Android 5.0 or newer)SecondMonitor.exe: the PC program (needs the .NET 10 Desktop Runtime, ffmpeg and adb; see the README)
v1.1.0
What's new
- Real touchscreen input. The tablet now works as a genuine multi-touch screen. Swipe to scroll
lists and pages, pinch to zoom, and use several fingers at once. In v1.0.0 touch only moved the
mouse, so scrolling by swiping did not work. - Close tablet app from the PC. There is a new Close tablet app button, and a
Close tablet app when stopped option that closes the tablet app when you press Stop or exit. - Mouse mode is still available. Untick Real touchscreen input (swipe) to go back to one
finger acting as the mouse. If Windows refuses touch input, the program switches to mouse mode by
itself.
Upgrading
Update both files together: install the new SecondMonitor.apk on the tablet and replace
SecondMonitor.exe on the PC.
- New APK with an old exe: touch does not work properly.
- Old APK with the new exe: still works, but only as one-finger mouse.
Notes
- Programs that do not support touch only react to taps, not swipes.
- Windows that run as administrator ignore touch unless
SecondMonitor.exealso runs as administrator.
Files
SecondMonitor.apk: the tablet app (Android 5.0 or newer)SecondMonitor.exe: the PC program (needs the .NET 10 Desktop Runtime, ffmpeg and adb; see the README)