Repository navigation
Releases
Push 2 Pass 0.5.3
Push 2 Pass 0.5.3
A start-up card, a status icon on the taskbar and by the clock, the P2P icon on the app, the right SimHub advice in setup, and fuller problem reports. Drivers on the Beta branch had these in 0.5.2-beta.1 and 0.5.3-beta.1.
New
- A start-up card. While the app loads, a card with the moving P2P logo and a loading bar shows instead of an empty window. When the app is ready, the card grows into the dashboard rather than closing for another window to open. If an update is ready, the card asks first: Update now, or Not now. The card stands aside for the setup wizard, the install check and the please-update window, and a shortcut set to start minimised or maximised opens the way it always did.
- The taskbar icon shows how it is going. While the app runs, its window and taskbar button carry the P2P icon, and the bar under the letters is blue while the app waits for the game, green while telemetry is coming in, and red when something is wrong: another program holds the UDP port, or the game sends a format the app is not set for. When telemetry starts coming in, a rainbow sweeps along the bar for a second and a half before it turns green. When something goes wrong, the red bar blinks three times, then stays red. The same moment does not repeat within 30 seconds, and turning off Windows' "Animation effects" stops the movement. A taskbar button pinned from a shortcut may keep the shortcut's icon.
- An icon by the clock. The same status icon sits in the notification area. Point at it to see how the connection is doing, click it to bring the app forward, or right-click for Open and Quit. Windows 11 may keep a new icon under the ^ until you drag it onto the taskbar.
- The P2P icon on the app itself. The app file, its desktop and Start menu shortcuts and the installer now carry the blue P2P icon in place of the old one. Windows can take a while, or a restart, to refresh an icon it has cached.
- Reports show more. Report a problem now includes the game controllers the app can see and the names of the other programs running, such as SimHub, your wheel's software or an overlay, with the ones most likely to matter listed first. Names only: no window titles, no paths and nothing from inside those programs. You still see the whole report before anything is sent, and the terms above the Send button say so.
Fixed
- The right SimHub advice in setup. The setup wizard told SimHub users to add a second UDP setting in the game. F1 has only one UDP output, so that could not work. It now says: leave the game on 20777 for SimHub, turn on SimHub's UDP forwarding to 127.0.0.1:20778, and enter 20778 in the app. The language packs carry the same advice.
- Hidden names stay hidden. On a PC whose Windows account is called "User", a report could garble the hidden folder name and leave another PC's folder name showing. Both are fixed.
Languages
- Language packs 1.0.4 for French, German, Spanish, Italian, Brazilian Portuguese and Turkish translate 103 more lines that were still English: the install check and its Repair window, the please-update window, Report a problem, the live count, notices and What's new, plus the start-up card and the icon by the clock. They are out for 0.5.0 and later: on the Downloads page an installed pack shows Update to v1.0.4, and the new lines take effect the next time the app starts. They are still machine drafts; corrections are welcome on the Discord.
Install or update
- On 0.4.5 or later: Settings, Check for updates, Download and install.
- Otherwise run
F1RaceEngineerSetup-0.5.3.exeover your existing copy. Your settings and session data are kept.
SmartScreen may warn: More info, then Run anyway.
Push 2 Pass 0.5.3-beta.1
Push 2 Pass 0.5.3-beta.1
A beta for drivers on the Beta update branch. The Live branch stays on 0.5.1.
New
- A start-up card. While the app loads, a card with the moving P2P logo and a loading bar shows instead of an empty window. When the app is ready, the card grows into the dashboard rather than closing for another window to open. If an update is ready, the card asks first: Update now, or Not now. The card stands aside for the setup wizard, the install check and the please-update window, and a shortcut set to start minimised or maximised opens the way it always did.
- The taskbar icon marks the moments. When telemetry starts coming in, a rainbow sweeps along the icon's bar for a second and a half before it turns green. When something goes wrong, the red bar blinks three times, then stays red. The same moment does not repeat within 30 seconds, and turning off Windows' "Animation effects" stops the movement.
- An icon by the clock. The same status icon now sits in the notification area. Point at it to see how the connection is doing, click it to bring the app forward, or right-click for Open and Quit. Windows 11 may keep a new icon under the ^ until you drag it onto the taskbar.
- The P2P icon on the app itself. The app file, its desktop and Start menu shortcuts and the installer now carry the blue P2P icon in place of the old one. Windows can take a while, or a restart, to refresh an icon it has cached.
Languages
- Language packs 1.0.4 for French, German, Spanish, Italian, Brazilian Portuguese and Turkish translate 103 more lines that were still English: the install check and its Repair window, the please-update window, Report a problem, the live count, notices and What's new, plus the start-up card and the icon by the clock. They are out now for 0.5.0 and later: on the Downloads page an installed pack shows Update to v1.0.4, and the new lines take effect the next time the app starts. They are still machine drafts; corrections are welcome on the Discord.
Install or update
- On the Beta branch (Settings, General, UPDATE BRANCH, BETA; beta is by signup on the Discord): Check for updates, Download and install.
- Otherwise run
F1RaceEngineerSetup-0.5.3-beta.1.exeover your existing copy. Your settings and session data are kept.
SmartScreen may warn: More info, then Run anyway.
Push 2 Pass 0.5.2-beta.1
Push 2 Pass 0.5.2-beta.1
A beta for drivers on the Beta update branch. The Live branch stays on 0.5.1 until 0.5.2.
New
- The taskbar icon shows how it is going. While the app runs, its window and taskbar button carry the new P2P icon, and the bar under the letters is blue while the app waits for the game, green while telemetry is coming in, and red when something is wrong: another program holds the UDP port, or the game sends a format the app is not set for. A taskbar button pinned from a shortcut may keep the shortcut's icon.
- Reports show more. Report a problem now includes the game controllers the app can see and the names of the other programs running, such as SimHub, your wheel's software or an overlay, with the ones most likely to matter listed first. Names only: no window titles, no paths and nothing from inside those programs. You still see the whole report before anything is sent, and the terms above the Send button now say so.
Fixed
- The right SimHub advice in setup. The setup wizard told SimHub users to add a second UDP setting in the game. F1 has only one UDP output, so that could not work. It now says: leave the game on 20777 for SimHub, turn on SimHub's UDP forwarding to 127.0.0.1:20778, and enter 20778 in the app. Language packs 1.0.3 carry the same advice in French, German, Spanish, Italian, Brazilian Portuguese and Turkish.
- Hidden names stay hidden. On a PC whose Windows account is called "User", a report could garble the hidden folder name and leave another PC's folder name showing. Both are fixed.
Install or update
- On the Beta branch (Settings, General, UPDATE BRANCH, BETA; beta is by signup on the Discord): Check for updates, Download and install.
- Otherwise run
F1RaceEngineerSetup-0.5.2-beta.1.exeover your existing copy. Your settings and session data are kept.
SmartScreen may warn: More info, then Run anyway.
Push 2 Pass 0.5.1
Push 2 Pass 0.5.1
A fix for the app going "Not Responding" over and over with some wheels and pedals.
Fixed
- No more freezing with some wheels. On some PCs a wheel, pedals or another controller answers Windows slowly when the app looks for controllers. Up to 0.5.0 that look ran on the window's own thread every 5 seconds, so the window froze, came back for a moment and froze again, for as long as the app ran. 0.4.5 does the same. Controllers are now looked for and read in the background, so the window keeps answering. When a look is slow, the next one waits longer, up to a minute. On a PC with a controller that slow, a button press can still be late now and then, while a look runs.
- A wheel plugged in later stays quiet. Plugging a wheel in, or back in, while the app runs no longer sets off a binding on a button it already holds, such as the position a rotary switch rests on.
When something goes wrong
- A freeze leaves a note. If the window ever stops answering for 2 seconds or more, the app writes down for how long and what it was doing, and Report a problem sends that along. A freeze that is still going after 5 seconds is written down then too, in case Windows closes the app.
last-input-devices.txtin the app's data folder now says how long the looks for controllers take.
Install or update
- On 0.5.0 or 0.4.5: Settings, Check for updates, Download and install.
- Otherwise run
F1RaceEngineerSetup-0.5.1.exeover your existing copy. Your settings and session data are kept.
SmartScreen may warn: More info, then Run anyway.
Push 2 Pass 0.5.0
Push 2 Pass 0.5 (was F1 Race Engineer)
F1 Race Engineer is now called Push 2 Pass. Box 2 Overtake. It is the same app and the same engineer, and your settings, sessions and packs stay where they were. After the update the window, the Start menu and Apps & features say Push 2 Pass. For now the install folder, the exe, the setup file and the SimHub plugin keep the old name, so nothing you set up breaks.
The engineer can speak six more languages, as drafts. You can add your own sounds for ten race moments. There are two new engineer styles and an optional radio sound. The radio is quieter behind the safety car and says something when your race ends. Volume goes to 200.
Some things are gone or different on purpose. They are marked Gone below.
Languages
A Languages button under Settings has two tabs, INTERFACE for the screens and SPEAKING for the engineer. A language is a signed pack you download once: French, German, Spanish, Italian, Brazilian Portuguese or Turkish.
- All six are DRAFT: machine-drafted, checked by automated gates, not yet read by a native speaker. Selectable on the Languages page, but not offered at first-run setup until a native speaker has reviewed them.
- French, Spanish, Italian and Brazilian Portuguese speak through the neural voice. German and Turkish speak through a Windows voice for now.
- Lines a pack does not have yet are said in English, by an English voice.
- Voice commands in a language need Windows speech recognition for that language installed. Without it they stay English, and the page says so.
- A change of language takes effect the next time the app starts.
What the engineer says
In every style and language:
- "Last lap." as your race's final lap starts, once.
- A debrief when your race ends: "Chequered flag. P1, P1. Up 21 from the grid." The position is where you crossed the line, with no penalties applied. After the flag the engineer drops its other calls, except safety car calls and answers to your questions.
- Gone: while a safety car, VSC or the formation lap is out, no gap calls, no battle calls and no ERS mode or talking-point calls.
Style, sound and volume
- ENGINEER STYLE on the Voice page: Classic (the existing engineer, the default), Pit wall (shorter lines, instruction first) and Metronome (Pit wall's words, no Chatter lines, the lap report only on changes). English only, from the next start of the app.
- RADIO SOUND: Clean is the voice as every earlier build played it, and stays the default. Radio is a team-radio band, tuned on generated renders and not yet heard by a person.
- Volume goes to 200. Up to 100 the sound is exactly what it was. Above 100 it is boosted with a soft limiter.
Your own clips
The YOUR OWN CLIPS card on the Voice page plays sounds you add at ten moments, such as a race win, pole or a safety car. WAV or MP3, up to 6 seconds, up to 5 per moment. A clip waits until the engineer has finished, and urgent calls and push-to-talk cut it off. Your sounds stay on this PC.
Layout
- Gone: the sub-tab column. Every page has its own rail button, and a second column explains the open page and can be hidden. The smallest window is now 800 px tall, up from 640.
- Gone: the name and bar at the foot. Your picture is the last rail button and opens your stats and Sign out.
Controllers
- Each D-pad direction is a bindable button, on pads and wheels. Xbox-type pads work through XInput, with D-pad, bumpers and triggers as buttons.
- PlayStation pads (DualShock 4, DualSense, DualSense Edge) are read directly, so they keep working over Bluetooth when Steam, DS4Windows or the game switches the pad's mode.
- Bindings saved by 0.4.5 keep working.
last-input-devices.txtin the app's data folder now says, per controller, whether any input has been seen.
Also
- The crash report's terms now say it includes the engineer's last few radio lines (lap times, gaps, rival names), and an install folder outside your user folder is removed from the text too.
- The title bar shows how many copies of the app are open. Settings, General, LIVE COUNT turns it off.
- Neural voices that carried real drivers' first names are now Cobalt, Granite, Slate, Harbour and Atlas. Your saved choice keeps working.
- English corrections: "T27" is now said "turn 27", watched-car gap lines say "seconds", and "race-" is said "race minus".
Push to talk
- Every press gets an answer: "Say again?" when the engineer did not catch it, and after two silent presses, once, a line telling you to check which microphone Windows is using.
- If Windows' privacy settings keep desktop apps off the microphone, the first press says so.
ERS calls
- One call per stretch, no late calls, and the Automation page says what the map does. Nothing switches your ERS mode for you.
When something goes wrong
- Repair: "has been modified" after an update is a window with a Repair button, which puts back only the files that differ.
- Updates check their own work, and anything still wrong goes into
update.log. - Report a problem opens by itself after a crash, and is in the Start menu and Settings, General. You see the whole report before anything is sent.
- Please update: if a version has a known problem, the app can ask at startup to install the latest one.
- What's new shows what changed, once, on the first start after an update.
Install or update
- On 0.4.5: Settings, Check for updates, Download and install.
- Otherwise run
F1RaceEngineerSetup-0.5.0.exe(the setup keeps the old name for now) over your existing copy. Your settings and session data are kept.
SmartScreen may warn: More info, then Run anyway. If the radio calls something it should not, or a language says something odd, tell me with what it said.
Push 2 Pass Offline 0.5.3
Push 2 Pass Offline 0.5.3
The offline build of 0.5.3: a start-up card, a status icon on the taskbar and by the clock, the P2P icon on the app, the right SimHub advice in setup, fuller problem reports, and the freeze fix from 0.5.1. Still with the online half left out on purpose.
Rebuilt on 4 November 2026: the What's new window now lists only what the offline version has, without the full version's updates, Repair, live count and notices. Nothing else changed, so a copy installed before then does not need reinstalling.
New
- A start-up card. While the app loads, a card with the moving P2P logo and a loading bar shows instead of an empty window, and grows into the dashboard when the app is ready. It stands aside for the setup wizard and the install check, and a shortcut set to start minimised or maximised opens the way it always did.
- The taskbar icon shows how it is going. While the app runs, its window and taskbar button carry the P2P icon, and the bar under the letters is blue while the app waits for the game, green while telemetry is coming in, and red when something is wrong: another program holds the UDP port, or the game sends a format the app is not set for. When telemetry starts coming in, a rainbow sweeps along the bar for a second and a half before it turns green. When something goes wrong, the red bar blinks three times, then stays red. The same moment does not repeat within 30 seconds, and turning off Windows' "Animation effects" stops the movement.
- An icon by the clock. The same status icon sits in the notification area. Point at it to see how the connection is doing, click it to bring the app forward, or right-click for Open and Quit. Windows 11 may keep a new icon under the ^ until you drag it onto the taskbar.
- The P2P icon on the app itself. The app file, its desktop and Start menu shortcuts and the installer now carry the blue P2P icon in place of the old one. Windows can take a while, or a restart, to refresh an icon it has cached.
- Reports show more. Report a problem now includes the game controllers the app can see and the names of the other programs running, such as SimHub, your wheel's software or an overlay. Names only: no window titles, no paths and nothing from inside those programs. As before, nothing is sent unless you tick the box and press Send report, and the app itself still makes no network call: a separate small program sends it.
Fixed
- No more freezing with some wheels. On some PCs a wheel, pedals or another controller answers Windows slowly when the app looks for controllers. Up to 0.5.0 that look ran on the window's own thread every 5 seconds, so the window froze, came back for a moment and froze again. Controllers are now looked for and read in the background, so the window keeps answering. If the window ever stops answering for 2 seconds or more, the app writes down for how long and what it was doing, and Report a problem includes it.
- A wheel plugged in later stays quiet. Plugging a wheel in, or back in, while the app runs no longer sets off a binding on a button it already holds, such as the position a rotary switch rests on.
- The right SimHub advice in setup. The setup wizard told SimHub users to add a second UDP setting in the game. F1 has only one UDP output, so that could not work. It now says: leave the game on 20777 for SimHub, turn on SimHub's UDP forwarding to 127.0.0.1:20778, and enter 20778 in the app.
- Hidden names stay hidden. On a PC whose Windows account is called "User", a report could garble the hidden folder name and leave another PC's folder name showing. Both are fixed.
Install or update
This build has no update checker - that is part of the online half it deliberately leaves out. Download the installer and run it over your existing offline copy. Your settings and session data are kept.
- F1RaceEngineerOfflineSetup-0.5.3.exe is the installer (it keeps the old name for now).
- F1RaceEngineer-Offline.zip is the app folder for anyone who prefers no installer.
- SHA256SUMS-Offline.txt has the checksums.
It installs alongside the full version rather than over it, under its own name, with its own settings and session data.
Windows may show a SmartScreen warning. Click More info, then Run anyway.
Push 2 Pass Offline 0.5.0
Push 2 Pass Offline 0.5.0 (was F1 Race Engineer Offline)
F1 Race Engineer Offline is now called Push 2 Pass Offline. It is the same app and the same engineer, still with the online half left out, and your settings and sessions stay where they were. Once this setup has run, the window, the Start menu shortcuts and Apps & features say Push 2 Pass Offline. For now the install folder, the data folder, the exe, the setup file and the SimHub plugin keep the old name, so nothing you set up breaks. On a copy installed over an older one, the Start menu folder the shortcuts sit in keeps its old name too.
The engineer can speak six more languages, as drafts, from a language pack you install from a file. You can add your own sounds for ten race moments. There are two new engineer styles and an optional radio sound. The radio is quieter behind the safety car and says something when your race ends. Volume goes to 200.
Some things are gone or different on purpose. They are marked Gone below.
Languages
A Languages button under Settings has two tabs, INTERFACE for the screens and SPEAKING for the engineer. A language is a signed pack: French, German, Spanish, Italian, Brazilian Portuguese or Turkish. This build has no catalog and downloads nothing, so a language shows as COMING until you install its pack by hand: copy the pack's .zip to this PC, then Settings, Downloads, Install from file. The pack's signature is checked before it installs. The packs are the language releases at https://github.com/TrulyAsleep/F1RaceEngineer-content, the same files the full version downloads.
- All six are DRAFT: machine-drafted, checked by automated gates, not yet read by a native speaker. Once its pack is installed a language can be picked on the Languages page, but none is offered at first-run setup until a native speaker has reviewed it.
- This build has no neural voice, so all six speak through a Windows voice, as English does. On System default the engineer uses a Windows voice that speaks the language when this PC has one. A voice you picked yourself is kept whatever language it speaks.
- Lines a pack does not have yet are said in English, by an English Windows voice.
- Voice commands in a language need Windows speech recognition for that language installed. Without it they stay English, and the page says so.
- A change of language takes effect the next time the app starts.
What the engineer says
In every style and language:
- "Last lap." as your race's final lap starts, once.
- A debrief when your race ends: "Chequered flag. P1, P1. Up 21 from the grid." The position is where you crossed the line, with no penalties applied. After the flag the engineer drops its other calls, except safety car calls and answers to your questions.
- Gone: while a safety car, VSC or the formation lap is out, no gap calls, no battle calls and no ERS mode or talking-point calls.
Style, sound and volume
- ENGINEER STYLE on the Voice page: Classic (the existing engineer, the default), Pit wall (shorter lines, instruction first) and Metronome (Pit wall's words, no Chatter lines, the lap report only on changes). English only, from the next start of the app.
- RADIO SOUND: Clean is the voice as every earlier build played it, and stays the default. Radio is a team-radio band, tuned on generated renders and not yet heard by a person.
- Volume goes to 200. Up to 100 the sound is exactly what it was. Above 100 it is boosted with a soft limiter.
- The radio sound and the boost above 100 both work on the Windows voices this build speaks with.
Your own clips
The YOUR OWN CLIPS card on the Voice page plays sounds you add at ten moments, such as a race win, pole or a safety car. WAV or MP3, up to 6 seconds, up to 5 per moment. A clip waits until the engineer has finished, and urgent calls and push-to-talk cut it off. Your sounds stay on this PC.
Layout
- Gone: the sub-tab column. Every page has its own rail button, and a second column explains the open page and can be hidden. The smallest window is now 800 px tall, up from 640.
Controllers
- Each D-pad direction is a bindable button, on pads and wheels. Xbox-type pads work through XInput, with D-pad, bumpers and triggers as buttons.
- PlayStation pads (DualShock 4, DualSense, DualSense Edge) are read directly, so they keep working over Bluetooth when Steam, DS4Windows or the game switches the pad's mode.
- Bindings saved by 0.4.5 keep working. last-input-devices.txt in the app's data folder now says, per controller, whether any input has been seen.
Push to talk
- Every press gets an answer: "Say again?" when the engineer did not catch it, and after two silent presses, once, a line telling you to check which microphone Windows is using.
- If Windows is set to keep desktop apps off the microphone, the first press says so.
ERS calls
- One call per stretch, no late calls, and the Automation page says what the map does. Nothing switches your ERS mode for you.
Also
- The crash report's terms now say it includes the engineer's last few radio lines (lap times, gaps, rival names), and an install folder outside your user folder is removed from the text too.
- English corrections: "T27" is now said "turn 27", watched-car gap lines say "seconds", and "race-" is said "race minus".
When something goes wrong
- Files that do not match: if the startup check finds files in this copy that differ from the release, a window now lists them in place of the old message box. There is no Repair button in this build, because Repair downloads the release. Run the setup over it again; your settings and sessions are kept.
- Report a problem opens by itself after a crash, and is in the Start menu and Settings, General. You see the whole report first, and nothing goes unless you press Send. As in 0.4.5, Send hands the report to a separate small program that makes the one request; the app itself makes no network calls.
- What's new shows what changed, once, on the first start after you install this over an older copy, and Settings, General opens it again. It is the full version's list, so a few points in it - the live count, Repair, updates checking their own work and Please update - are not in this build.
Not in this build
The full version's 0.5.0 also has a live count of open copies in the title bar with a LIVE COUNT switch, renamed neural voices, Repair, updates that check their own work and a Please update window at startup. Each of those needs the network or the neural voice, so none of them is here. There is no sign-in either, so the rail has no picture button at its end.
Install or update
This build has no update checker - that is part of the online half it deliberately leaves out. To move to it, download the installer and run it over your existing offline copy. Your settings and session data are kept.
- F1RaceEngineerOfflineSetup-0.5.0.exe is the installer (it keeps the old name for now).
- F1RaceEngineer-Offline.zip is the app folder for anyone who prefers no installer.
- SHA256SUMS-Offline.txt has the checksums.
It installs alongside the full version rather than over it, under its own name, with its own settings and session data.
Windows may show a SmartScreen warning. Click More info, then Run anyway. If the radio calls something it should not, or a language says something odd, tell me with what it said.
Push 2 Pass 0.5.4-dev.7 (dev branch)
Dev branch build. It is offered only to drivers on the DEV update branch: Live and Beta stay on 0.5.3.
New since 0.5.4-dev.6:
- Delete app and Delete data in Settings. A new DELETE section on the Settings page. Each button asks before it does anything.
- Delete app closes the app and opens its uninstaller, which asks whether to remove your settings and session data too. A one-line install opens Windows' Installed apps list instead, and a zip copy opens the folder it runs from.
- Delete data deletes everything the app keeps on this PC: your settings, session archives and lap data, downloaded voices and language packs, and your Discord sign-in. The app then restarts as a new install. Your join key stays the same, because it belongs to this PC. This cannot be undone.
- A third button, to ask the server to remove what it keeps under your Discord account, appears when the new website goes live.
Still in this build from dev.1 to dev.6: the dashboard fonts that ship with the app, the eight new languages (Russian, Polish, Dutch, Japanese, Chinese (Simplified), Korean, Czech and Hungarian), the one language list, Download switching to the language and the Use button, the Basic and Upgraded language options, the restart prompt, the window that stays above the taskbar and fits smaller screens, the Home page changes, voice input in Report a problem, the pointer to the voice-input fix, and track limits and rain calls that no longer flip-flop.
Known: inside a language pack, the new DELETE section and the Use button show in English, and the two voice-input lines keep their old wording, until the packs' next update.
Push 2 Pass 0.5.4-dev.6 (dev branch)
Dev branch build. It is offered only to drivers on the DEV update branch: Live and Beta stay on 0.5.3.
New since 0.5.4-dev.5:
- Voice input in Report a problem. A report now carries the voice-input file: which speech recogniser started, or the step where Windows speech recognition refused and why, the microphone, and what the last push-to-talk press heard. The report's terms list the microphone and voice commands now that the report carries them.
- "Voice input isn't available" says where the fix is. The engineer now says the Voice & Radio page explains it, and that page gives the two usual fixes: add English (United States) with Speech recognition in Windows Settings, and pick your microphone under Input in Windows Sound settings, then restart Push 2 Pass.
- Track limits and rain no longer flip-flop. Around a crash or a restart the engineer could say "regular" and "strict" track limits by turns, and "rain threat gone" then "rain expected" again. A changed track-limits reading now has to last 30 seconds before it counts, and the rain warning is called off only after 30 seconds of clear forecast.
Still in this build from dev.1 to dev.5: the dashboard fonts that ship with the app, the eight new languages (Russian, Polish, Dutch, Japanese, Chinese (Simplified), Korean, Czech and Hungarian), the one language list, Download switching to the language and the Use button, the Basic and Upgraded language options, the restart prompt, the window that stays above the taskbar and fits smaller screens, and the Home page changes.
Known: inside a language pack, the two voice-input lines keep their old wording, and the Use button and its tip show in English, until the packs' next update.
Push 2 Pass 0.5.4-dev.5 (dev branch)
Dev branch build. It is offered only to drivers on the DEV update branch: Live and Beta stay on 0.5.3.
New since 0.5.4-dev.4:
- The dashboard's fonts come with the app. Archivo and JetBrains Mono now ship inside the app instead of loading from Google Fonts every time the dashboard opens, so the dashboard no longer contacts Google at all. It looks the same as before.
Still in this build from dev.1 to dev.4: the eight new languages (Russian, Polish, Dutch, Japanese, Chinese (Simplified), Korean, Czech and Hungarian), the one language list, Download switching to the language and the Use button, the Basic and Upgraded language options, the restart prompt, the window that stays above the taskbar and fits smaller screens, and the Home page changes.
Known: the Use button and its tip show in English inside every language pack until the packs' next update, as do some lines in the six older packs.