Repository navigation
Deckboy v0.99.428 — 4K effects and transitions on the graphics card; Render to file; Shader, Lumia and Voice sources; Ableton Link; Melt and Circuit Bend
This is an older release. The current version is always at releases/latest.
Themes
- New theme: Rainbow Road. The whole desk turns slowly round the colour wheel, one lap every two minutes. Each colour keeps its brightness, so every label stays as readable as in any other theme. Any theme can do it:
hue_cycle <seconds>in itstheme.txt.
Screens
- New: Screens > STAGE, a projection simulator and blend planner. A room with the screen, the programme on it, each projector's picture, overlaps and cone of light; turn round it with the mouse. The planner takes the screen's size and the projectors' pixels, lumens, throw ratio, overlap and number, and gives the row's pixels, each picture's size, the throw distance and the screen's brightness (lux, nits, foot-lamberts), with the best fit when the pictures cannot cover the screen exactly, and the same with one projector more or less. One button sets the outputs' areas and edge blends to match. The plan is kept with the show.
- New:
VIDEO BLEND ROW <first output> <how many> <overlap px>blends a row of three or more projectors, asVIDEO BLEND PAIRdoes two.
Phone remote
- New PAD on the phone page: drag one finger on a square and two controls move together, such as an effect's glow and blur, a deck's opacity, or Lumia's flow and prism. Stack several effects on the pad and they all follow. HOLD springs every control back when you let go; LATCH leaves them where you left them. It uses the same pairing and passphrase as the rest of the page, and the desk lets go by itself if the phone goes quiet. Companion:
PAD <deck> SET <x 0-1> <y 0-1>,PAD <deck> RELEASE,PAD <deck> MODE HOLD|LATCH,PAD <deck> ASSIGN <slot> <X> <Y>(a control isOPACITY,FX<n>.AMOUNT,FX<n>.AtoF, orNUM.<name>such asNUM.lumia.flow),PAD <deck> REMOVE <slot>,PAD <deck> CHIP <slot> ON|OFFandPAD <deck> LIST.
VJ mode
- Ableton Link. A LINK button in the VJ bar joins the Link session on the network. Deckboy follows the tempo and the bar of Live, Traktor, Rekordbox and any other Link app. It shows "LINK: 3 peers". A tempo set by a peer updates the BPM here; TAP and a typed BPM are offered to the session. The LFOs and the quantised takes use the session's beats. Saved with the show. Tested with Ableton Live 12 on Windows: Deckboy joined Live's session and a tempo set in Deckboy moved Live's. Live on Windows shows its LINK button only when its audio driver type is ASIO. The build option is
ENABLE_LINK(on by default); Link is vendored innative/extras/link. - Quantise length. A take can wait for the next beat, 1 bar, 2 bars or 4 bars (four beats a bar), or not wait. The QUANTISE button steps through them. Before, a take could only wait for the next beat. With Link, bars follow the session.
- A four-beat light shows the beat of the bar, and while a take is held the bar says "TAKE waits for the bar: 0.9 s".
- Companion:
VJ LINK <on|off|status>andVJ QUANTISE <beat|1|2|4|off>(onandoffwork as before). - Fixed: the blend, TAP and tempo buttons in the VJ bar drew but could not be clicked. The desk cleared its list of clickable buttons right after the bar added to it.
Render to a file
- New: RENDER TO FILE (MENU > RECORDING). It makes a file frame by frame: each frame is drawn when the last is written, so a 4K60 file comes out perfect on a laptop that cannot play it live. It is not a screen recording. Choose this cue, cues N to M, or an output's whole show; 1080p, 4K or the output's size; 25, 30, 50 or 60 frames a second; ProRes 4444 with alpha, H.264 or PNG frames. A bar shows
frame 1,368 of 3,600, the frames a second and the time left. - The show's clock steps by exact frames while it renders: generated sources, LFOs, effects and video files all use it, and a video file is read at the render's rate with no dropped frames. The same render gives the same file twice. Not frame-exact yet, so the dialog refuses them and says why: live inputs, browser pages, timers, the Terrarium, rotation and the size and position oscillators, Text mode, the motion puppet and Audioprint. Masks, slices, a layer's corner pin and the output's crossfader are refused with a reason. Not drawn: sound.
- Transitions are drawn between the cues of a range or a whole show, each cue's own style and length (crossfade, dips, push, wipe, iris, portal, shatter, clouds, ghastly), frame-exact. An output's whole show draws every layer of the output with its opacity, blend and rect. Both give the same bytes twice.
- Companion:
RENDER START <CUE|CUES a-b|OUTPUT> <1080P|4K|OUTPUT> <25|30|50|60> <PRORES|H264|PNG> <file>,RENDER STATUS,RENDER CANCEL,RENDER DIALOG.
Playback
- Fixed: importing a MIDI file made a sound cue instead of a MIDI file cue wherever the computer's ffmpeg can read MIDI files (ffmpeg-full builds can, and the Windows download carries one).
- New: direction on a video cue: forward, reverse or bounce (there and back, no frame shown twice at the turns). Deckboy makes a reversed or bounced copy of the cue's trimmed range once, in the background, and plays it; until then the cue plays forwards and the row shows how far the copy has got. A new trim makes a new copy. The sound is reversed too. A clip whose every frame is a whole picture (ProRes, HAP, DNxHR, MJPEG, PNG...) gets a lossless copy in seconds, in its own codec; others (H.264, H.265...) are encoded, and choosing reverse says which. Companion:
DIRECTION [FORWARD|REVERSE|BOUNCE|STATUS].
Deckboy Mini
- Fixed: resizing the terminal left copies of the status panel down the window. The panel now draws on a screen of its own, from the top, and clears once when the size changes.
Long runs
- Fixed: every take leaked a timer handle and a little memory on Windows (the decoder threads' SDL state was never freed). A list of one short clip looping all day lost about two handles a second. Measured with
tools/check_mini_soak.py.
Sources
- New: a MIDI File cue can play Deckboy's own synth. Its port row steps through the MIDI ports, then DECKBOY SYNTH: the file's notes play every synth on air (the chip synth or a hosted instrument live on another playlist, and any video synth), as the play row does. The chip plays one note at a time; an instrument plays chords. Stop, a scrub back or a loop lets go of the file's own notes, not the ones you play. Companion:
MIDIFILE PORT SYNTH, andCHIP ADD [NES|FDS]adds a chip synth cue. - Fixed: after you removed a playlist (or undid that), a MIDI File cue playing on a later playlist could send a burst of its notes at once or skip some, and STOP could silence the wrong port.
- New source: Voice. SOURCE > MADE BY DECKBOY > Voice (typed text, spoken) adds a cue that says typed text with the vocal-tract voice of the lesson characters. Pick one of the sixteen characters or CUSTOM (pitch, throat size, breath), and WORDS or SOUNDS (the character's own noises instead of the words). Its display can be TRACT: the vocal tract itself (throat, tongue, lips and nose), moving with the speech. It ends by itself when the speech does; with LOOP on it says the line again and again ("shoo be doo wop"), and a repeat count (3x) works too. A new line is made in the background and kept, so a retake starts at once. Companion:
VOICE SAY <text>,VOICE CHARACTER <name>|CUSTOM,VOICE MODE WORDS|SOUNDS,VOICE PITCH|SIZE|BREATH,VOICE STATUS. - Fixed: a Sting cue's pitch, length, sweep and body were never saved with the show, so every Sting came back as the default one. They are saved now; a Sting saved before keeps the defaults.
- Fixed: a Sting cue set to LOOP struck once, and then the cue went round in silence. Each pass strikes again now.
- New source: Shader. SOURCE > MADE BY DECKBOY > Shader (.fs)... runs an ISF shader (the
.fsformat of isf.video) on the graphics card. The shader's own inputs become the cue's controls: a float is a number row with the ~ oscillator, a colour opens the colour picker, a bool is a switch, a long is a choice, a point is two numbers. Buttons: LOAD .FS, SHADER FOLDER, EDIT. Deckboy ships seven of its own (plasma, lava lamp, starfield, scanline sunset, pixel rain, dream machine, circuit bend) and lists the ones in your shader folder. Companion:SHADER [STATUS],SHADER LOAD <path>(from the Deckboy computer only, as it reads a file at the path it is given),SHADER SET <input> <value...>,SHADER LFO <input> .... - Shaders are compiled when first used, with glslang (GLSL to SPIR-V) and SPIRV-Cross (SPIR-V to HLSL for Direct3D 11 and MSL for Metal; Vulkan takes SPIR-V). Both are fetched at build time (
DECKBOY_ISF, on by default). One pass and no image inputs for now: other shaders are refused with the reason shown on the cue, with the line of a compile error. Direct3D 12 outputs cannot run shaders yet. Tested on Direct3D 11; the Metal and Vulkan versions are written but not yet run. - New source: Lumia. Laser light through moving water, a prism and a tube of mirrors, like the light-art machines of the 1960s and 70s. Controls in four groups: water (flow, water, ripple size, second jet), prism (lasers, prism, split, focus, shimmer), mirrors (tube, mandala or none; 0 to 12 mirrors, panel angle, top / bottom, spin) and light (lens, glow, brightness, trail). Every number has an LFO, and it can listen to the programme sound. Add it from SOURCE > MADE BY DECKBOY. Companion:
LUMIA. - Lumia is made on the graphics card when every output can draw it there. Tested on Direct3D 11, Direct3D 12 and Vulkan; the Metal (macOS) version is written but not yet run. Only the small trace of light is worked out on the CPU, so a 4K output costs about what a 1080p one does: 1080p 12 ms and 4K 18 ms a frame at most, from 16 ms and 31 ms. A grade, a key or effects on the cue keep it on the CPU, as before.
DECKBOY_CPU_SOURCES=1keeps every source on the CPU.
Effects
- New: three ~ shapes follow one band of the sound each: audio-low (up to 250 Hz: the kick, the bass), audio-mid (250 Hz to 4 kHz: voices, the snare) and audio-high (above 4 kHz: hi-hats, cymbals). Each band is measured against its own loudest moment of the last few seconds, so a quiet hi-hat moves its control as far as a loud kick moves its own.
- New: every audio ~ (audio, audio-low, -mid, -high and audio-pitch) can listen to a live input. Its middle cell steps through auto (the live input while Settings > AUDIO INPUT has one open, otherwise the playlist, as before), playlist and live input. With no input open in Settings, Deckboy opens one to listen only: nothing it hears goes to the speakers, a stream or a recording. Companion:
FX LFO <n> <A-G> listen auto|playlist|input; STATUS JSON reportsaudioHeard. - Fixed:
FX LFOrefusedphase,syncandbeats, which HELP and the Companion module offered. - Fixed: DATAMOSH smeared some of a clip's hard cuts and not others (6 of the 11 in the Datamosh lesson's clip). Every hard cut smears now.
- Fixed: with ffmpeg 9, DATAMOSH never finished making its moshable copy, so turning it on did nothing and the Datamosh lesson stopped at its MOSH step.
- DATAMOSH deinterlaces an interlaced clip in its moshable copy, so the smear does not comb.
- Fixed: Render to file drew a cue with DATAMOSH on, or set to play in reverse or bounce, as the plain file played forwards. It draws what the deck plays now, and says to wait while that copy is still being made.
- New effect: Stereogram. It turns any cue into a random-dot stereogram that shows the picture in 3D when you look through the screen. Bright parts come forward. A video or a camera becomes moving 3D; a Text cue becomes a hidden message. Controls: depth, repeat width, colour and dots move, each with an LFO. It runs on the graphics card, so a 4K video with it stays at 60 fps; without a graphics card that can run it, it costs about 1.2 ms a 1080p frame and 4 ms at 4K on the processor.
- Melt: a new material, liquid, and the one a new Melt starts on: the picture turns to glossy molten plastic that sags in rounded lumps, bends through them like thick glass, and catches white highlights and oil-slick rainbow colour, while anything that moves leaves melting ghosts. Controls in liquid: flow, lumps, refraction, reform and gloss.
- New effect: Melt. The picture holds and drips run out of it: a few channels run, the material pinches into thin necks with glossy heads, and drips run in surges. Controls: drip, drips, pinch, set (how fast drips harden away) and sheen, each with an LFO, and two choices: direction (down, up, sideways) and material (bright: bright things drip over the dark, as text and logos do; whole picture: everything is wax).
- New effect: Tape. VHS from its causes: tape age (dropouts, colour fizz), head wear (softness, streaky noise), tracking (a rolling noise band), deck age (wobble, the bend at the top of the frame, hum bars), colour drift (colour smeared, late, drifting in hue) and copies (generation loss), each with an LFO, plus tape speed (SP, LP, EP) and interference (phone, dimmer, radio). The same tape plays the same way twice.
- New effect: Circuit Bend, after a circuit-bent video enhancer. Bands (brightness as a few loud false colours), drift (the colours turn over time), bleed (colour floods past edges in blocks), ringing (fine stripes after every edge) and tears (lines slip sideways), each with an LFO. It runs on the graphics card too (Direct3D 11 and 12, Vulkan, Metal), matching the processor's picture to within one level.
- New shipped shader deckboy_circuit_bend: the same bend as a source, on a picture of its own (colour bars, a ramp, drifting blobs or noise).
- Melt and Tape run on the graphics card (Direct3D 11 and 12, Vulkan, Metal). A 4K video with either holds 60 fps and stays zero-copy; on the processor they took 64 ms and 30 ms a 4K frame. Tape on the processor (a computer without a graphics card, or a stack with an effect the card cannot run) now takes 8 ms a 4K frame: from 2560 wide it runs at half size and is drawn back up.
- Effects can have choices: a setting from a list, shown as a dropdown row. Companion:
FX CHOICE <n> <A|B> <name>. - Chladni has three styles. Original is the effect as before. Sand is real sand: each grain keeps the colour of the picture where it started, runs to the still lines and shakes where the plate moves. Change the note and the sand pours into the new figure. A grain slider sets the grain size from 1 to 16 pixels, so the sand can be fine or blocky. Fluid puts the picture under water on the plate: waves ring in the plate's figure, bend the picture and focus the light. Settle sets how long the old waves last after the note changes.
- Effects can have up to six controls. Each one has its own LFO, and Companion's FX PARAM accepts A to F (FX LFO accepts A to G, where E is the amount).
- An effect that was bypassed kept its LFOs only until the show was saved. It keeps them now.
Importing slides and files
- Slides imported on Windows were one pixel short at some sizes: a 16:9 PowerPoint deck imported at 1920 wide came in at 1919x1079, and the output stretched every slide to fit, which softened fine lines and text. Pages now come in at the exact size. Measured on a 109-slide test-pattern deck: the average difference from an ideal render fell from 4.5 to 0.6 (of 255), and on the worst slide from 80.6 to 2.4.
- On Windows, a file whose name uses characters outside the system's language (for example Japanese on an English Windows) would not import, as media or as slides. Deckboy now handles file names in any script.
- A PowerPoint file that needs a password to open used to wait three minutes and then blame Protected View. Deckboy now says at once that it needs a password, and how to remove it or export a PDF.
- Keynote files on Windows and Linux: Deckboy tries LibreOffice when it is installed (it reads Keynote files up to about 2013). Otherwise, or when that fails, it says why: Apple keeps the Keynote format secret on purpose, a malicious lock-in tactic. And it gives the best route: open the file in Keynote on iCloud.com (free, in any browser), download a PDF, and import that. Before, it failed with no reason.
- An empty file says it is empty, and a damaged PDF says it may be damaged, instead of an error code alone.
Desk monitor
- The monitor shows the whole composited output while that output is off: every playlist, layer, Lower Third and effect, as the output would draw it. Before, an output that was off left the monitor showing only the selected playlist, so in a lesson you could not see the picture you were building. It is drawn on the graphics card at no more than 1280x720 and sent nowhere.
- Faster: with a 1080p clip and two effects on the desk, the desk's update went from 10.5 ms to 1.3 ms (95th percentile) and Deckboy's CPU from 276% to 38% of one core. Two playlists cost a little more than before (13% to 23%), because both are now drawn.
Live captions
- Quicker: words now show about a second after they are said (1.1-1.4 s), down from 2.1-2.5 s, and the first words of a sentence in 1.5 s instead of 3. The engine starts its next pass as soon as it can, instead of waiting a fixed second after each one; it still rests at least 40% of the time, so a show's CPU is safe. Measured with the base English model, the engine on 8 threads of a 32-thread PC; a slower computer waits longer, in proportion to its passes.
Scopes
- Added a SPECTROGRAM to the SOUND scopes: frequency up the side (log scale, 25 Hz to 20 kHz),
the last 8 seconds across with the newest on the right, and level as colour from -96 dBFS to 0.
It is a 4096-point FFT with a Hann window, 47 columns a second. The SPECTROGRAM button in
the SPECTRUM panel's title row switches to it (it takes the whole column, and SPECTRUM takes
you back; the loudness meter keeps running). The analysis runs only while that view is up.
SCOPES SOUND SPECTROGRAM [ON|OFF]andSCOPES SOUND SPECTRUMpick the view, and
SCOPES SOUNDnow reportsspectro=<Hz>/<dB>for the loudest row of the newest column. - Added
tools/make_spectrogram_picture.py: it writes a WAV whose spectrogram draws a picture of
your own (a PNG, or a word). Import it and open the panel to see it. - The picture scopes can go on an output. Set an output's Shows to SCOPES and it draws the waveform, parade, vectorscope, diamond and histogram full screen, for a colourist or a camera shader on a display of their own. The scopes run while it is on, whatever the desk's monitor shows. Companion:
VIDEO OUTPUT ADD SCOPESandVIDEO OUTPUT TYPE SCOPES. - Scopes over NDI: turn NDI on for a SCOPES output, and any NDI monitor on the network shows the scopes. A stream, a recording or the Web Monitor can carry them too, with the SCOPES output as its Source.
- A multiview window can show the scopes, on the desk's MULTI monitor and on any output that shows the multiview. Choose the picture scopes in the window's menu. Companion:
MULTIVIEW WINDOW <n> SCOPES.
Outputs and lessons
- Video Outputs: the output picker is a list of the outputs by name. Before, each click moved to the next output. ADD OUTPUT is now beside the picker.
- After you removed an output, the outputs after it kept their old numbers ("Output 3", "Output 4") while the playlist tag, the routing chips and Companion called them 1 and 2. An output with its default name now takes its new number. A name you chose does not change.
- Fireside is a room now. The fireplace stands on a wooden floor with a stone hearth in front of it (it used to float half way up a brick wall). Logs burn in it with taller flames. The mantel has candles and a clock (its hands show how long the cue has run), and a painting hangs above it. A rug, an armchair and a log basket stand on the floor, and the firelight flickers over all of it. Intensity, sparks and the window views work as before.
- In a lesson, an open menu no longer goes under the lesson card. The card moves beside the menu. Before, in Coach Marv's lesson, the card covered SOURCE's Video Synth row.
Performance: effects on the graphics card
- 25 picture effects now run on the GPU: invert, posterise, solarise, levels, curves, strobe, scanlines, threshold, colour, colour replace, vignette, grain, channel offset, mirror, luma key, edges, polar warp, luma displace, lightspeed, ripple, kaleidoscope, mosaic, blur, glow and sharpen.
- A layer's stack runs on the GPU when every effect in it has a GPU version and the output runs on Direct3D 11, Direct3D 12, Metal or Vulkan. Any other stack, renderer or GPU fault uses the CPU, as before. The CPU result is the reference: the GPU result matches it (mean difference 0.00 of 255).
- On Windows (Direct3D 11), a cue with GPU effects stays zero-copy: the decoded video does not come back to the CPU. This includes 10-bit SDR video.
- A layer's effects now run at the size the layer is drawn. A 4K clip in a quarter-size picture-in-picture costs about a sixteenth of what it did.
- Measured on a 4K output (RTX 4070 Laptop): a 4K base with four mixed-format layers, two effects on each layer, eight on the base and LFOs on all of them, holds 60 fps. Fifteen mixed-format layers with two effects each: 106 ms -> 53 ms a frame (the rest is the CPU decoding a dozen software codecs). Eight effects on the 4K base: 130 ms -> 8 ms a frame.
DECKBOY_CPU_EFFECTS=1keeps every effect on the CPU.- Known limit: Metal (macOS) is not yet tested on a Mac. If its shaders do not build, the effects run on the CPU.
Transitions
- Fixed: the Portal, Shatter, Clouds and Ghastly transitions dropped frames at 4K. They now hold 60 fps, like a crossfade. At 4K the outgoing picture took 46-55 ms a frame and now takes 3.4-5.8 ms. They now draw on the GPU; the picture is the same.
- An outgoing cue's effects stay on through the transition, on the GPU too.
DECKBOY_CPU_TRANSITIONS=1keeps these four transitions on the CPU.
Outputs
- Turning an output on, or moving it to another screen, no longer changes the video size. With a fixed size (
VIDEO 1920X1080) it used to switch the whole show to the screen's own size ("auto native"), which changed the size of every output, recording and stream in the middle of a show. The fixed-size picture is now shown scaled to the screen.
Recording
- Fixed: recording a 4K output made about a third of the output's frames late. A recording that copies an output now takes that output's finished picture instead of drawing the whole show a second time. At 4K the output stays at 60 fps while it records.
- This applies when neither the recording nor the output it copies adds anything of its own (time overlay, opacity, matte, overlay, live captions or key+fill), and the recording sends nowhere else. Otherwise the recording draws its own picture, as before.
DECKBOY_RECORD_OWN_COMPOSITE=1always draws its own. - Fixed: turning a window output off and on during a recording, while the show had a fixed video size, made the recording fall further behind every second, and RECORD OFF then stopped responding. A take now keeps the size it started at; a picture that changes shape is letterboxed into it.
Colour and key
- Fixed: colour controls (brightness, contrast, saturation, hue) on a 4K cue dropped the output to about 9 fps. A 4K frame took 114 ms and now takes 17 ms.
- Fixed: the chroma key on a 4K cue dropped the output below 30 fps (42 ms a frame, now 17 ms).
- The picture is exactly the same as before.
Desk
- Fixed: the desk and the outputs held for up to 60 ms at a TAKE, most on the first TAKE of a video.
- Fixed: opening the scopes held the desk for about 50 ms the first time.
- Fixed: the first RECORD held the desk while it looked for hardware encoders.
- Fixed: adding an effect to a playing cue held the frame for about 30 ms.
Slide import
- The import card has a CANCEL button (Esc works too). It stops the import and drops what was made.
- The card shows the step it is on and how long it has run.
- A OneDrive "online only" deck is downloaded first, with its progress on the card. If OneDrive cannot download it, the import says so at once.
- Fixed: a PowerPoint deck import waited a minute and failed when OneDrive was not running.
- Fixed: importing a deck closed a PowerPoint window you already had open.
Masks
- The inspector's MASK section has two new rows: remove takes the mask off the cue (it stays in the show), and delete removes it from the show and from every cue that uses it. Undo brings a deleted mask back.
- Fixed: undo skipped an edit made right after another edit when neither changed the number of cues, such as a deleted mask or a changed fade.
Linux
- The GPU effects and the GPU scopes now run on Vulkan.
Interface translations
- About 17,000 more translated lines across the full languages. Full languages are now about 81% complete.
- Typed command words (CLICK, SLICE, DRAW, ON/OFF/TOGGLE and others) stay in English in every language, because you type them.
Remote protocol and diagnostics
- STATUS JSON reports each playlist's effect cost per frame as
fxMs. DECKBOY_FX_FULL_SIZE=1runs layer effects at the decoded size, as before.
Creatures
- Seven new creatures that react to each other and to you: starlings that fly as one flock and scatter from the mouse pointer, a school of koi, a snake whose body follows its head, an octopus that jets away from the pointer, an owl that turns its head to watch the pointer, bats that roost until the pointer comes near, and ants that walk in a line.
- A cat and a mouse on the same theme now play: the cat wakes, creeps up, pounces, and misses. The mouse also runs from the pointer.
- Fourteen of the new themes have them: Dusk Rose and Glacier (starlings), Matcha and Cherry Blossom (koi), Desert Dusk (snake), Deep Sea (octopus), Forest Night (owl), Darkroom, Highway at Night and Ultraviolet (bats), Sandstone and Terracotta (ants), Coffee Shop and Neon Noir (cat and mouse).
- As before, creatures only live in empty space, never over a control, and leave while an output is live.
Splash
- The new Dr. Pixel and Prof. Video splash panels are now drawn with smooth scaling instead of nearest-neighbour scaling, which made uneven blocks on large screens.
Lessons
- In the Datamosh lesson, Caroline Polkadot sings STAIRLIFT's song with the music video while it plays, in time with it: the lyrics with EXPERIMENTAL: WORDS, her own syllables with SOUNDS, the tune on her chip voice with CHIP, and nothing with OFF. She follows the video through a pause, a seek and a retake. Companion:
LESSONS SONGsays whether she is singing. - New lesson: Datamosh, with STAIRLIFT's music video and Caroline Polkadot. What makes a clip mosh well (hard cuts, a busy picture before each one, big steady motion after it), the effect, and the wait for the moshable copy. The clip is NASA launches, balloons and drop tests and a roller coaster ride, cut on the bars of the Deckboy theme. Credits:
data/lessons/CREDITS.md. - The Sound lesson plays a song of its own, "Around the Mix" by the robot DJs, instead of a test tone, so you can hear the delay and the reverb on music. Made with Deckboy's own synth and voice. A Sound lesson left half way in 0.99.427 starts again with the song.
Lesson voices
- New: the Experimental voice. A simulated vocal tract reads the lesson characters' lines aloud, each with their own pitch, mouth size and breath, in any language; or, as EXPERIMENTAL: SOUNDS, each character says their own sounds instead of the words ("rada rada rada", "gopiki kupiki gulikiki"). The VOICE button on every lesson card steps CHIP, EXPERIMENTAL: WORDS, EXPERIMENTAL: SOUNDS, OFF; also Lesson voices in MENU and
LESSONS VOICE CHIP|WORDS|SOUNDS|OFF. The mouths move with the voice. Based on Pink Trombone's model (MIT licence). - The guests in the lessons now have voices of their own, in the same little Game Boy synth as Dr. Pixel and Prof. Video: the lighthouse keeper low and slow, the coach gruff, the chef bouncing between octaves. A guest waits for the teacher to finish, and stage directions like raises an eyebrow are not spoken.
- The robot DJs speak in chopped, synthy syllables on the Game Boy's wave channel, which the synth now has: a high voice and a low one.
Transitions
- Fixed: the Ghastly, Shatter and Clouds transitions dropped frames on a 60 Hz output, most at 4K. A 4K Shatter took 26 ms a frame and now takes 4-7 ms; Ghastly took 18-22 ms and now takes 8-10 ms. The pictures are exactly the same.
- Fixed: with no output on, the program monitor showed a cut where the transition should be. It now shows the transition the output would draw. This also made transitions look broken in the Transitions lesson, which runs with the output off.
- STATUS reports the transition the output draws, as
outgoing=<style>@<percent>per playlist.
Companion module 1.0.10
- New actions: a video cue's direction (forward, reverse or bounce); DATAMOSH on the selected cue; Ableton Link (join, leave or toggle); VJ quantise to the next beat or the next 1, 2 or 4 bars; Shader (load a
.fsfile, set an input, give an input an LFO); Lumia (set any control, give a control an LFO); Voice (say a text, the character, WORDS or SOUNDS, pitch, size and breath); live captions (on or off, what they listen to, which outputs show them, lines and size, make captions for a cue) and subtitles on the live cue; the phone's PAD (set, let go, HOLD or LATCH, what it moves); Render to file (open, close, cancel); edge blend for a row of projectors. - Multiview windows can show the Scopes.
- The effect LFO actions can set what an audio shape listens to (auto, playlist or input), and their phase, sync and beats settings work now.
- Shader's load action works only when Companion runs on the Deckboy computer: Deckboy does not read a file path from another computer.
Languages
- About 75 more interface strings are translated in every language: the About page, the tracker, the encoder's format list, the timecode, ATEM, NDI and tally rows, the keyboard help, and the playlist's drag hint.
- The About page's label column now fits the longest label in the language on screen. Long labels were cut short.
- Text the desk builds while it runs is now translated: "Deck 2", "1 of 2", "Bitrate: 6000 kbps", "Deck 1 to Out 1", the watch folder line, "added ..." toasts, and the lesson lines that name your screens. Names, paths, codecs and numbers stay as they are.
- The lesson line about a second screen names the MENU and OUTPUT buttons the way the buttons read in your language.
- Fixed: the "It ate the desk" joke said "You have Two screens" with a capital T.
- MENU and the VOLUME label are now translated in every language. The lessons that say "MENU" use the same word as the button.
- Hawaiian (ʻŌlelo Hawaiʻi) is now a full translation: the whole desk and every lesson. No speaker has reviewed it yet.
Downloads
| Platform | Installer | Portable |
|---|---|---|
| Windows | Deckboy-0.99.428-windows-x64-setup.exe |
Deckboy-0.99.428-windows-x64.zip |
| macOS (Apple Silicon) | Deckboy-0.99.428-macos-arm64.dmg |
Deckboy-0.99.428-macos-arm64.zip |
| macOS (Intel) | Deckboy-0.99.428-macos-x86_64.dmg |
Deckboy-0.99.428-macos-x86_64.zip |
| Linux (x86_64) | Deckboy-0.99.428-x86_64.AppImage |
Deckboy-0.99.428-linux-x86_64.tar.gz |
Every build carries what it needs — the binary, ffmpeg and its runtime libraries. Nothing else to install.
Each file's SHA-256 is in SHA256SUMS.txt: in the download folder, sha256sum -c SHA256SUMS.txt --ignore-missing checks what you downloaded.
Deckboy Mini on its own
Mini also comes inside every download above. On its own, for a screen that only needs to play:
| Platform | File |
|---|---|
| Windows | Deckboy-Mini-0.99.428-windows-x64.zip |
| macOS (Apple Silicon) | Deckboy-Mini-0.99.428-macos-arm64.zip |
| macOS (Intel) | Deckboy-Mini-0.99.428-macos-x86_64.zip |
| Linux (x86_64) | Deckboy-Mini-0.99.428-linux-x86_64.tar.gz |
| Raspberry Pi (64-bit) and ARM64 Linux | Deckboy-Mini-0.99.428-linux-arm64.tar.gz |
Control surfaces
| Surface | File | How |
|---|---|---|
| Stream Deck | Deckboy-1.0.0.streamDeckPlugin |
Double-click it. |
| Bitfocus Companion | Deckboy-companion-module-1.0.10.zip |
Unzip it somewhere permanent, then point Companion's developer modules path at the folder containing it. INSTALL.txt inside has the three steps. |
First run
Deckboy is free software and is not code-signed, so the OS does not recognise the publisher. One time only:
- macOS — if it says the app is damaged:
xattr -dr com.apple.quarantine /Applications/Deckboy.app - Windows — SmartScreen may appear: More info → Run anyway
Deckboy is free, open-source cue-based media playback and show control for live video — clips, slides and live sources on one cue list, out to a screen, NDI, SRT or Blackmagic SDI, with a stream and a recording running at the same time and presenter view on its own display, driven from a Stream Deck, Bitfocus Companion, OSC, MIDI or LTC timecode.
What it does · Manual · How it compares · FAQ · Full history
If Deckboy runs part of your show, a ⭐ on the repository is how the next operator finds it.