Skip to content

Releases

SetupLab 1.0 — beta 2.0.2

Choose a tag to compare

📖 Interactive user guide — every step, button, tab and setting explained with screenshots: vincentchevalier44.github.io/SetupLab (French version)

SetupLab

Install or update

  • From 1.5.4 or newer: click Update at the top of the SetupLab window (in the pits, car stopped). SetupLab downloads this release, checks its size and SHA-256, and restarts itself.
  • From 1.5.2 or older, or a first install: close Assetto Corsa, delete the old assettocorsa/apps/lua/SetupLab folder, then extract SetupLab-1.0.0-beta.2.0.2.zip into assettocorsa/apps/lua/. Your settings, track memory and saved setups are kept.

SHA-256 of the zip: ec5931f8b396b10deb9d261cc8dce4a1a138ae5a0c93e81802d6f8f0b86b241a

❤️ Support SetupLab: SetupLab is free and will stay free for everyone. I build it in my spare time; if you enjoy it, you can give a little help on Patreon WHK Racing, from 1 € a month (cancel at any time). Thank you!

Why this update

Drivers often fine-tune a SetupLab setup by hand in AC's setup menu, and those faster changes were lost at the next load. A computed gearbox could also reach top speed before the last gear. A full review of the code then found several smaller defects, and a player reported laps rejected for "brake bias changed while driving" on a car that moves its brake bias by itself.

What changes

Your faster changes kept

  • A SetupLab setup from the track memory, then changed by you in AC's setup menu and faster on your own laps (qualifying: your best lap counted by AC; race: the mean of at least 3 race laps), is saved as the next version once the car is stopped. It becomes the memory reference and the setup to load; the previous version stays in the memory.
  • Never during a refinement (its versions still wait for "Validate"), never for a locked setup, never when the car's setup has changed again since.
  • Setting the original tyre compound back releases your compound change, as for the other settings.

Gearbox

  • Each computed setup is judged on its own top speed (ERS, DRS and the rev limiter included): top speed is reached in the last gear. This penalty is left out of the per-setting gains shown, which stay lap time only.

Laps and companion apps

  • Cars that move their brake bias by themselves during the lap no longer have every lap rejected; changing the bias on the wheel still sets the lap aside outside a race session.
  • A lap neutralised by AdvancedIA in one session is no longer applied to the same lap number of the next session.
  • When SetupLab is turned off, SpotterEngineer receives an idle state.

Robustness

  • A setup file found truncated after writing goes to the Recycle Bin; the in-game update accepts a version number with trailing spaces; an error while recording a lap no longer stops the computations; the Debug report no longer copies car file values.

Checked on the offline test bench (508 tests, 11 new) and tried in game. The self-adjusting brake bias case is checked on the bench only. Full list in the CHANGELOG.

SetupLab 1.0 — beta 2.0.1

Choose a tag to compare

📖 Interactive user guide — every step, button, tab and setting explained with screenshots: vincentchevalier44.github.io/SetupLab (French version)

SetupLab

Install or update

  • From 1.5.4 or newer: click Update at the top of the SetupLab window (in the pits, car stopped). SetupLab downloads this release, checks its size and SHA-256, and restarts itself.
  • From 1.5.2 or older, or a first install: close Assetto Corsa, delete the old assettocorsa/apps/lua/SetupLab folder, then extract SetupLab-1.0.0-beta.2.0.1.zip into assettocorsa/apps/lua/. Your settings, track memory and saved setups are kept.

SHA-256 of the zip: c13d242d3c19fca0fecc56013e2e8defd10da15986eb648ea06908a70373c99d

❤️ Support SetupLab: SetupLab is free and will stay free for everyone. I build it in my spare time; if you enjoy it, you can give a little help on Patreon WHK Racing, from 1 € a month (cancel at any time). Thank you!

Why this update

In game, a race setup planned too little fuel, and the track memory showed a simulated time instead of the driver's own race laps. A full review of the code then found that gear settings were written under the wrong section names in setup files, plus several smaller defects in how laps are counted for the race.

What changes

Race fuel and stint

  • Race fuel uses the same basis as the other apps by the same author: (race laps + 1 reserve lap) × consumption + 2 L of safety fuel. The fuel margin setting (3 % by default) is added to the starting fuel only.
  • Consumption is the mean of your last 5 race-pace laps (dry and wet apart), never below CSP's figure. Pit laps, refuelling and laps neutralised by AdvancedIA are left out.
  • Timed races: the lap count uses your real lap time when you are faster than the simulation, plus one lap.
  • AdvancedIA rules: the stop count is never below the mandatory stops; the maximum stint length is never exceeded; the panel says whether stops come from the rule or the tank.

Your times

  • Race memory and "your average lap": laps AC counts in traffic or with a driving incident now count for the race, also when you refine the race setup in practice or qualifying. During a race refinement they also count for the steps and the minimum, as in a race session.
  • Changing the brake bias on the wheel no longer voids the lap.
  • The first race lap after a setup change on the grid is reported as a standing start.
  • "Your best · current setup" follows the setup actually in the car.
  • Qualifying counts use clean laps only; race texts say race laps.

Gearbox

  • Setup files name gears INTERNAL_GEAR_2..7 for GEAR_1..6 of setup.ini; SetupLab now maps them correctly when writing, reading back, comparing (the gearbox is no longer "to confirm") and in the free CSP 0.2.11 mode.

Checked on the offline test bench (497 tests, 10 new); not yet tried in game. Full list in the CHANGELOG.

SetupLab 1.0 — beta 2.0.0

Choose a tag to compare

SetupLab

Install or update

  • From 1.5.4 or newer: click Update at the top of the SetupLab window (in the pits, car stopped). SetupLab downloads this release, checks its size and SHA-256, and restarts itself.
  • From 1.5.2 or older, or a first install: close Assetto Corsa, delete the old assettocorsa/apps/lua/SetupLab folder, then extract SetupLab-1.0.0-beta.2.0.0.zip into assettocorsa/apps/lua/. Your settings, track memory and saved setups are kept.

SHA-256 of the zip: 298638087ae73918288ec35dc888d2b7f076ae06a888c3c45c09bb229d61efc3

📖 New: interactive user guide, with every step, button, tab and setting explained with screenshots, updated with each version: vincentchevalier44.github.io/SetupLab (French version).

❤️ Support SetupLab: SetupLab is free and will stay free for everyone. I build it in my spare time; if you enjoy it, you can give a little help on Patreon WHK Racing, from 1 € a month (cancel at any time). Thank you!

Why this update

SetupLab now works hand in hand with two companion apps by the same author, AdvancedIA (human-like AI and race direction, 2.0.0 or newer) and SpotterEnginer (spotter and race engineer). SetupLab stays fully independent: without them, nothing changes and nothing new is shown. The game log also showed that, since 1.5.11, the track's AI line was no longer read during the discovery: this is fixed. This version also brings an ERS map for hybrid cars and a review of the whole workflow.

The link with AdvancedIA and SpotterEnginer and the ERS map are checked on the offline test bench; they have not been tried in game yet.

What changes

With AdvancedIA 2.0.0 or newer (offline sessions)

  • Laps under safety car, VSC, FCY, red flag, yellow flag, formation lap or with a penalty count in AC's times only: they are left out of the calibration, race pace, fuel consumption and tyre wear.
  • Race rules: mandatory stops and maximum stint length cap the stint and the starting fuel; DRS disabled by the rules is not counted; with a mandatory tyre change, the pit stop preset gets the best allowed compound other than the fitted one.
  • Cars stopped, off the track or retired no longer count as traffic; the dry/wet switch follows AdvancedIA's track state at once; SetupLab's computing slice shrinks when AdvancedIA needs more time per frame.
  • A setting "Use AdvancedIA's data" appears in the SETTINGS tab only when AdvancedIA is installed. SetupLab only reads AdvancedIA's data, it never writes into it. With the free CSP 0.2.11, SetupLab works as before.

With SpotterEnginer

  • SetupLab shares a short read-only summary (setup in the car, planned fuel, target hot pressures, refinement state, trial verdicts), so the race engineer can announce a new version ready and whether a trial is better or worse.

ERS map (hybrid cars)

  • The QUALIFYING and RACE tabs show the track map with the deployment plan in colours (where to deploy, where the car's own program deploys, where to recover), the start and the direction of travel, and the recommended starting MGU-K program. Cars whose ERS is run by their own script are not covered.

Fixes

  • The track's AI line is read again at once during the discovery (CSP is called with the exact number of arguments; broken since 1.5.11).
  • Car-specific setting names (ARB_F, SPRING_LF, DAMPER_…, BUMPSTOP_…), third-element bump stops, MGU-K/MGU-H start settings, turbo, engine braking, steering assist and gear sets are recognised and kept, each with its reason, instead of "not recognised".
  • Gear ratios written by CSP as INTERNAL_GEAR_n / FINAL_RATIO are read back under the setting names.
  • When a computation is impossible for good with a car, the step card says why and offers to read the car again.
  • During a race, the version in the car can no longer be discarded: judge it at the finish.
  • A setup name you choose ending with the type in another case is written in the expected form; "Car's default setup" is only offered when CSP gives the default values.
  • "Setup not saved: current setup unreadable" now says what to do, and the log records what CSP returned.

Offline test bench: 487 tests (21 new). Full list in the CHANGELOG.

SetupLab 1.0 — beta 1.5.11

Pre-release

Choose a tag to compare

SetupLab

Install or update

  • From 1.5.4 or newer: click Update at the top of the SetupLab window (in the pits, car stopped). SetupLab downloads this release, checks its size and SHA-256, and restarts itself.
  • From 1.5.2 or older, or a first install: close Assetto Corsa, delete the old assettocorsa/apps/lua/SetupLab folder, then extract SetupLab-1.0.0-beta.1.5.11.zip into assettocorsa/apps/lua/. Your settings, track memory and saved setups are kept.

SHA-256 of the zip: b062db9f2533a9898f8dfad09ac4b6293dc44791f06440d2760780f6743b982f

Why this update

A third complete review of the code. Several parts of the physics model did not follow Assetto Corsa closely enough (camber, ABS braking, drivetrain, rolling resistance, hybrids); with the free CSP 0.2.11 the car data could still not be read (issue #2); and a few smaller defects were found in the interface, the saved data and the lap recorder.

Your calibrations saved by an earlier version are redone with your next clean laps (the model changed). The model changes are checked on the offline bench; they have not been tried in game yet.

What changes

Physics model

  • Negative camber now gives grip up to the tyre's best angle (before, any camber was counted as a loss).
  • Braking with ABS: the model holds each axle at its own limit, so the brake bias matters much less.
  • No fixed 10 % drivetrain loss in the model: the inertia of wheels, engine and gearbox slows acceleration in low gears instead.
  • Rolling resistance follows the tyre load (the tyre coefficients were read as forces); lift now takes load off an axle.
  • Hybrids can go past the combustion engine's top speed with the ERS deploying.
  • Packer range, tyre compound comparison, off-grid settings, fuel on board, spring units, tight hairpins: corrected.

CSP 0.2.11 (issue #2)

  • Car files, setup settings and track data are now read outside the computing coroutine, where CSP 0.2.11 returned a number or nothing. Checked on the offline bench, which reproduces the report; not yet tried in game with CSP 0.2.11.
  • The J0 report shows what CSP returns for these reads; an unreadable car now says what to do.

Computing and frame rate

  • Car data and AI line read once per AC launch.
  • The computing slice is reduced only when your frame rate drops below its usual value (a VR or capped frame rate no longer makes computing four times slower).
  • A replay or an online pause pauses the computation instead of cancelling it.

Saved data, laps, interface

  • Shorter saved data, smarter clean-up when full (logged); safe with mod folders containing an apostrophe; longer file names.
  • Long frames at the line no longer reject a lap; the recorder and log keep working after a session restart.
  • Overlay settings follow a version being prepared; calibration gauges use each factor's bounds; start cards and the MEASURE tab fit narrow windows.
  • Your Windows user name is masked in the copied J0 report. Three unused font files removed.

Offline test bench: 466 tests. Full list in the CHANGELOG.

SetupLab 1.0.0-beta.1.5.9 — load on the grid, AC's lap times, qualifying tyres, CSP 0.2.11 car data

Choose a tag to compare

SetupLab

Install or update

  • From 1.5.4 or newer: click Update at the top of the SetupLab window (in the pits, car stopped).
  • From 1.5.2 or older:

Caution

Delete the old SetupLab folder first. Close Assetto Corsa, delete assettocorsa/apps/lua/SetupLab, then extract SetupLab-1.0.0-beta.1.5.9.zip into assettocorsa/apps/lua/. Your settings, track memory and saved setups are kept.

Requires Custom Shaders Patch 0.2.11 (the free version installed by Content Manager) or newer.

Why this update

  • In a race, you could not load your race setup on the grid ("car not in the pits").
  • The times shown did not match AC's information tab, and the track memory showed a simulated time as your best.
  • A qualifying setup could keep hard tyres.
  • With the free CSP 0.2.11, some cars gave "Computation unavailable, car model incomplete" (issue #2).

What changes

  • Load on the grid: in a race session, before the start, a setup loads on the grid as in the pits (Resume my race, Start from qualifying, Try the race v1). Once the race has started, nothing is loaded before the finish, as before.
  • Your times, the same as AC's: "your best" is your best lap of the session with that setup, as AC's timing counts it (laps in traffic or with a small incident included); the clean lap used by the analysis is shown next to it when different. The track memory shows your real best (or average) lap with each validated setup, never a simulated time as yours. The calibration still uses clean laps only.
  • Qualifying tyres: on a dry track, the softest compound of the mounted range (hypersoft, ultrasoft, supersoft, then soft). A compound you refused, or one imposed in the settings, comes first.
  • Rain: the track switches between dry and wet only after the new state has lasted 20 seconds.
  • CSP 0.2.11: when this CSP gives empty car files or no setup settings, SetupLab reads the raw car files and deduces the settings from the car's setup.ini.
  • Full review: race tyre compounds compared at the measured temperature, ballast counted once, the Performance/Stability help text in the right direction, translations, and clean-up.

Full list: CHANGELOG. Offline test bench: 430 tests.

SHA-256 of SetupLab-1.0.0-beta.1.5.9.zip: 08315bd419c5716e09239f992e91bf9e559ce02f02032376a68034663a8fcfc8

SetupLab 1.0 — beta 1.5.10

Pre-release

Choose a tag to compare

SetupLab

Install or update

  • From 1.5.4 or newer: click Update at the top of the SetupLab window (in the pits, car stopped).
  • From 1.5.2 or older:

Caution

Delete the old SetupLab folder first. Close Assetto Corsa, delete assettocorsa/apps/lua/SetupLab, then extract SetupLab-1.0.0-beta.1.5.10.zip into assettocorsa/apps/lua/. Your settings, track memory and saved setups are kept.

Requires Custom Shaders Patch 0.2.11 (the free version installed by Content Manager) or newer.

Why this update

A second complete review of the code. A few lap times could still differ from AC's own timing, the saved data of some mod cars and tracks was lost at every launch, and some calculations were checked again and corrected.

What changes

  • Lap times: a lap no longer takes the previous lap's time when AC publishes it a few frames late; a lap invalidated just before the line no longer makes the next one invalid; after a session restart, the first lap stays your best of the new session.
  • Saved data of mod cars and tracks: folder names with spaces, accents, parentheses or "+" now keep their calibration, track memory and race laps from one launch to the next.
  • Calculations: top speed up to the rev limiter (it could come out up to 7 km/h too low); a setting locked by a series simulated at the value in the car; one hot-pressure calculation for the model and the optimiser.
  • Calibration: since the model changed (top speed, locked settings), calibrations saved by an earlier version are not reused; your next clean laps calibrate the car again.
  • CSP 0.2.11: every list read from CSP is accepted as an object as well as a Lua table (issue #2).
  • Interface: gains with the same sign everywhere (negative: faster), step card colours back in the Racing 26 theme, the last French texts of the English interface translated.
  • Clean-up: unused code, settings and translations removed, values moved to the configuration.

Full list: CHANGELOG. Offline test bench: 450 tests.

SHA-256 of SetupLab-1.0.0-beta.1.5.10.zip: 760287eb3a3b4b3e1ba6de789eabbffea0425c758314222ac6e0a08d254a66aa

SetupLab 1.0.0-beta.1.5.8 — repository renamed SetupLab, native addresses

Choose a tag to compare

SetupLab, race engineering for Assetto Corsa

Caution

Updating from 1.5.2 or older? Delete the old SetupLab folder first, one last time. Close Assetto Corsa, delete assettocorsa\apps\lua\SetupLab, then extract the new zip into assettocorsa\apps\lua\. Your settings, track memory and saved setups are not stored in that folder, so they are kept. Already on 1.5.4 or newer? Click Update at the top of the SetupLab window, in the pits.

Install or update — read this first

Requirements: Assetto Corsa with Custom Shaders Patch 0.2.11 or newer (the free version from Content Manager is fine; CSP 0.3.2-preview2 is supported), offline or online.

  1. Close Assetto Corsa completely.
  2. Updating from 1.5.2 or older: delete the old folder assettocorsa\apps\lua\SetupLab. Your settings, calibration, track memory and saved setups are kept: they are stored outside that folder.
  3. Extract SetupLab-1.0.0-beta.1.5.8.zip into assettocorsa\apps\lua\ itself. Windows' "Extract All" suggests a new folder named after the zip: change the destination to the apps\lua folder. You must end up with apps\lua\SetupLab\manifest.ini, not SetupLab\SetupLab\....
  4. Start a session, go to the pits and open the setup screen: the SetupLab window is there. On track, the CSP app bar has SetupLab Track and SetupLab Overlay.

Why this update

  • The GitHub repository is now named SetupLab (it was ACSetupLab). SetupLab now uses the new addresses directly, without going through GitHub's redirects. Nothing else changes: everything is as in beta 1.5.7 (online mode, race setup refined during the race).

What changes

  • In-game update: SetupLab reads the latest version at github.com/VincentChevalier44/SetupLab and downloads from there. The version file keeps a line with the old address for the versions 1.5.4 to 1.5.7 already installed, so they still find this update.
  • Links in the app (HELP tab), the README and the user guide point to the new repository. The online user guide is now at vincentchevalier44.github.io/SetupLab/notice.html: the old address no longer works.

Checked on the offline test bench (422 tests). Full list in the changelog. Feedback is welcome in the Issues.

SHA-256 of SetupLab-1.0.0-beta.1.5.8.zip: 7b9a4cb6413e041c8437b43cbebe0969b45111f1a33e8ed8a4e0f0820e2877c0

SetupLab 1.0.0-beta.1.5.7 — online mode, race setup refined during the race

Choose a tag to compare

SetupLab, race engineering for Assetto Corsa

Caution

Updating from 1.5.2 or older? Delete the old SetupLab folder first, one last time. Close Assetto Corsa, delete assettocorsa\apps\lua\SetupLab, then extract the new zip into assettocorsa\apps\lua\. Your settings, track memory and saved setups are not stored in that folder, so they are kept. Already on 1.5.4, 1.5.5 or 1.5.6? Click Update at the top of the SetupLab window, in the pits.

Install or update — read this first

Requirements: Assetto Corsa with Custom Shaders Patch 0.2.11 or newer (the free version from Content Manager is fine; CSP 0.3.2-preview2 is supported), offline or online.

  1. Close Assetto Corsa completely.
  2. Updating from 1.5.2 or older: delete the old folder assettocorsa\apps\lua\SetupLab. Your settings, calibration, track memory and saved setups are kept: they are stored outside that folder.
  3. Extract SetupLab-1.0.0-beta.1.5.7.zip into assettocorsa\apps\lua\ itself. Windows' "Extract All" suggests a new folder named after the zip: change the destination to the apps\lua folder. You must end up with apps\lua\SetupLab\manifest.ini, not SetupLab\SetupLab\....
  4. Start a session, go to the pits and open the setup screen: the SetupLab window is there. On track, the CSP app bar has SetupLab Track (the same interface, new in 1.5.7) and SetupLab Overlay. A new window may start closed: open it once from the app bar.

From 1.5.4 on, SetupLab updates itself: when a newer version is published, an Update button appears at the top of its window.

Why this update

  • SetupLab paused online. It now works online exactly as offline.
  • In a race you start on the grid, without the setup menu, so SetupLab could not be used during a race, and the RACE tab needed a validated SetupLab qualifying setup first. Now the race itself is analysed lap after lap, from the setup you chose, and SetupLab offers a race setup at the finish, for your next race.

What changes

Online mode

  • Online, SetupLab works exactly as offline, in every session, race included. Nothing is sent to the server; a setup imposed by the server is not loaded.
  • New setting Active online (SETTINGS tab), ticked by default. Untick it if a league's rules forbid apps: SetupLab then pauses online, and an Enable SetupLab online button appears under the pause banner.
  • Traffic filter, online and offline (AI cars included): outside a race session, a lap with another car less than 40 m ahead or 8 m behind for more than 2 s in total is not counted (slipstream, blocking).

Race setup refined during the race

  • New window "SetupLab Track", opened from the CSP app bar while driving: the same interface as the setup-menu window.
  • RACE tab, in a race session: "Refine during the race" starts from the setup in the car, whatever it is, without a SetupLab qualifying setup, and turns SetupLab on. A setup you load or change in AC's setup menu (car stopped) is read again on its own and becomes the base. The lap count is read from the session (estimated for a timed race).
  • Your race laps count, traffic and incidents included: a lap in traffic, or with an off-track, a cut, a spin, a slide, a wheel lock-up, an impact or invalidated by AC, counts for the race (pace, fuel use, wear, tyres), never for the calibration or the qualifying lap. Pit lane laps, a car reset to the track and the lap after the flag do not count. Outside a race session, nothing changes.
  • The race setup is computed once, at your own chequered flag (not the leader's), from the whole race, at full speed (about 1 to 2 minutes), and announced once: "race setup vN for your next race". During the race nothing is computed, so nothing slows the game down.
  • Nothing is loaded once the race has started, pit stop included: "Validate" saves the file for your next race. Before the start, nothing changes: you can still start from a qualifying version and try its race v1 in the pits.

Checked on the offline test bench (421 tests). Tried in game: the online mode, and a full race refined from the grid (setup loaded from AC's menu, laps in traffic and with incidents counted, race setup computed at the finish, validated and loaded after the race). Feedback is welcome in the Issues.

Full list in the changelog. User guide: docs/notice.html in the archive, or online (section "During a race").

SHA-256 of SetupLab-1.0.0-beta.1.5.7.zip: 1d31b143ab6d7f8072041f1011bc11d272558eac4771a2c86f5fd01b83f824cd

SetupLab 1.0.0-beta.1.5.6 — no longer inactive with the free CSP 0.2.11

Choose a tag to compare

SetupLab, race engineering for Assetto Corsa

Caution

Updating from 1.5.2 or older? Delete the old SetupLab folder first, one last time. Close Assetto Corsa, delete assettocorsa\apps\lua\SetupLab, then extract the new zip into assettocorsa\apps\lua\. Your settings, track memory and saved setups are not stored in that folder, so they are kept. Already on 1.5.4 or 1.5.5? Click Update at the top of the SetupLab window, in the pits.

Install or update — read this first

Requirements: Assetto Corsa with Custom Shaders Patch 0.2.11 or newer (the free version from Content Manager is fine; CSP 0.3.2-preview2 is supported), offline sessions.

  1. Close Assetto Corsa completely.
  2. Updating from 1.5.2 or older: delete the old folder assettocorsa\apps\lua\SetupLab. Your settings, calibration, track memory and saved setups are kept: they are stored outside that folder.
  3. Extract SetupLab-1.0.0-beta.1.5.6.zip into assettocorsa\apps\lua\ itself. Windows' "Extract All" suggests a new folder named after the zip: change the destination to the apps\lua folder. You must end up with apps\lua\SetupLab\manifest.ini, not SetupLab\SetupLab\....
  4. Start a session, go to the pits and open the setup screen: the SetupLab window is there. On track, SetupLab Overlay is in the CSP app bar. The first time, restart AC once if the overlay still shows CSP's grey title bar.

From 1.5.4 on, SetupLab updates itself: when a newer version is published, an Update button appears at the top of its window.

Why this update

  • With Custom Shaders Patch 0.2.11 (the free version installed by Content Manager), SetupLab stayed inactive and showed "Context unreadable: flag unreadable: isAltOnlineRace" (#1). This CSP does not have that flag at all.

What changes

  • Works with the free CSP 0.2.11: the alt-online flag (isAltOnlineRace, a fake online race driven by a New Modes script) does not exist in this CSP, so SetupLab now reads it as "not an alt-online race" instead of staying inactive. Such a race needs a newer CSP, which has the flag. The three other safety flags (online race, replay, replay-only mode) exist in 0.2.11 and still make SetupLab inactive when they cannot be read.
  • Offline bench: the simulated CSP 0.2.11 now lacks this flag, like the real one (checked against the 0.2.11 SDK), and the full cycle runs on it: discovery, computation, Validate, load in the pits.

This fix is checked against the CSP 0.2.11 SDK and on the offline bench (400 tests). It has not been tried in game with CSP 0.2.11 yet: feedback from players on the free CSP is welcome in the Issues. Everything else is as in beta 1.5.5.

Full list in the changelog. User guide: docs/notice.html in the archive, or online.

SHA-256 of SetupLab-1.0.0-beta.1.5.6.zip: af40532da643196d6384a95192688566696df03698832d433aa762cb9349d91b

SetupLab 1.0.0-beta.1.5.5 — overlay bar (lock, reduce, close), version announced from your own setup, local time in file names

Choose a tag to compare

SetupLab, race engineering for Assetto Corsa

Caution

Updating from 1.5.2 or older? Delete the old SetupLab folder first, one last time. Close Assetto Corsa, delete assettocorsa\apps\lua\SetupLab, then extract the new zip into assettocorsa\apps\lua\. Your settings, track memory and saved setups are not stored in that folder, so they are kept. Already on 1.5.4? Click Update at the top of the SetupLab window, in the pits.

Install or update — read this first

Requirements: Assetto Corsa with Custom Shaders Patch 0.2.11 or newer (the free version from Content Manager is fine; CSP 0.3.2-preview2 is supported), offline sessions.

  1. Close Assetto Corsa completely.
  2. Updating from 1.5.2 or older: delete the old folder assettocorsa\apps\lua\SetupLab. Your settings, calibration, track memory and saved setups are kept: they are stored outside that folder.
  3. Extract SetupLab-1.0.0-beta.1.5.5.zip into assettocorsa\apps\lua\ itself. Windows' "Extract All" suggests a new folder named after the zip: change the destination to the apps\lua folder. You must end up with apps\lua\SetupLab\manifest.ini, not SetupLab\SetupLab\....
  4. Start a session, go to the pits and open the setup screen: the SetupLab window is there. On track, SetupLab Overlay is in the CSP app bar. The first time, restart AC once if the overlay still shows CSP's grey title bar.

From 1.5.4 on, SetupLab updates itself: when a newer version is published, an Update button appears at the top of its window.

Why this update

  • CSP's title bar cut the top of the in-game overlay, and the overlay could not be locked in place.
  • Starting from your own setup or the default one, the overlay did not say when v1 was ready.
  • Saved file names were in UTC with CSP 0.3.1 and newer.
  • A race refinement waiting for its number of laps had nowhere to enter it.
  • The overlay showed during replays.

What changes

  • Overlay bar: CSP's title bar is replaced by a SetupLab bar showing the setup on track (or SetupLab's state) and three buttons: a padlock that locks the overlay in place (position and size), reduce (the bar alone, with the gap on your laps) and close (the CSP app bar opens it again). Drag the bar to move the overlay. The padlock and the reduced state are kept from one session to the next.
  • Version announced from your own setup: "v1 ready", the predicted gain and "back to the pits: Try v1", even when the car still has your own setup or the default one. Before it, the overlay shows what is left to do.
  • Overlay texts always fit in the window, whatever its size.
  • Local time in saved file names again with CSP 0.3.1 and newer (read through Lua's os.date, read only).
  • RACE tab: the number of race laps can be set under the step card while the race refinement runs.
  • SETTINGS tab: the "Setup settings" table folds, closed by default.
  • No overlay during replays.
  • Debug window lighter (only the visible log lines are drawn); readable pressed buttons without the "Racing 26" theme.

The overlay bar, the version announcement, the local time in file names and the in-game update were tried in game. The race laps entry, the folding table and the replay fix are checked on the offline bench (400 tests). Everything else is as in beta 1.5.4.

Full list in the changelog. User guide: docs/notice.html in the archive, or online.

SHA-256 of SetupLab-1.0.0-beta.1.5.5.zip: 13eaf79b45b9f035adcebe2ecd50b4cb5a1922bad4afff33887171b4ea9cc09a