Skip to content

CPCSyntaxError v0.14.0

Choose a tag to compare

@WacKEDmaN WacKEDmaN released this 07 Nov 12:57
· 8 commits to main since this release

CPCSyntaxError v0.14.0

This release adds machine profiles. It also has many CRTC, Gate Array and monitor fixes. They come from a screen-by-screen review of the SHAKER test suite against photos of a real CPC and against AmSpiriT-lite.

Machine profiles

You can now save a machine with all its expansions in a file, and load it again with one click.

  • Machine > Machine profiles shows your saved profiles. Click a profile to load it.
  • Save this machine as a profile... saves:
    • the model, RAM, CRTC, Gate Array and Z80
    • the keyboard region, the joystick and the monitor set
    • the firmware ROMs you chose and every expansion ROM slot
    • every expansion with its settings and folders: M4, Multiface II, RS232C, SYMBiFACE II/III, mouse interface, IDE, both Albireo boards, HD20, light gun, GFX9000, OPL4, PlayCity, speech, the MP3 card and the DAC
  • Save this machine with its media... also saves the discs in drives A and B, the tape and the cartridge.
  • A profile is the whole machine. When you load it, an expansion that it does not name is removed, and the machine restarts.
  • You can also load a profile with File > Open, drop a .cpcmachine file on the window, or start with --machine <name or file>.
  • Profiles are kept in the machines folder beside the program. They are text files with the same lines as cpcse.ini, so you can also write them by hand.

Fixes

  • M4: when you remove the M4, it now comes out of the machine. Before, a board that was fitted earlier stayed in after a restart.
  • CRTC 0: an R7 write equal to C4 starts the VSYNC on C0=R0 of a line, except on the last line of a row (SHAKER AI/D, B6/A).
  • CRTC 1: the RFD ("rupture for dummies") stops at the end of its frame. When the last line is cancelled with R4 only, the RFD occurs on one frame of two (SHAKER D9).
  • CRTC 3 and 4:
    • Status 2 bit 4 is the comparator that ends the additional lines. Bit 0 does not fire again in the additional lines (SHAKER DU/B2, DU/D, DU/G27).
    • The R8 SKEW function is now a delay line, as on CRTC 0. An R8 change is seen from the next character (SHAKER A2/C).
  • Gate Array: a colour change now shows on the character that the Gate Array displays, one character before the CRTC's (ACCC 9.2.2). In mode 2 on the 6128 Plus, it shows at the same place as in the other modes (SHAKER A9, DI).
  • Monitor:
    • Many syncs on a line (SHAKER D4) now move the picture over a few lines, as the real monitor does.
    • One line with no sync no longer bends the picture under it (SHAKER DT/B1).
  • CPC Plus:
    • The IM 2 response to an ASIC DMA interrupt is 6 µs. The Sonic special stage works again.
    • A Plus snapshot keeps RMR2, the cartridge page and the sprite magnification.