Repository navigation
Releases
Sim-QVFR 1.1.1-beta
Beta. Unofficial, not approved by the developers of Assetto Corsa EVO, Assetto Corsa Competizione, X-Plane 12 or Le Mans Ultimate. Use at your own risk. Offline only, unless you choose otherwise in Le Mans Ultimate (see Running with anti-cheat below).
Warning
Le Mans Ultimate: leave LMU's own VR FOV scale at 100% x 100%. If LMU's FOV scale (in its VR graphics settings) is set to anything else, Sim-QVFR can't compose the picture: you see a zoomed-in picture or a picture inside the picture. This is a known bug and will be fixed in a later release.
To trim the edges of your view for performance, use Sim-QVFR's own View crop instead: in the launcher, Picture › View & helmet (or the headset menu's View crop page). If you had LMU's Y scale at 90%, about 8% off the Top and Bottom gives a similar view.
Important
Pimax and Varjo users: check your headset's quad views foveated rendering. Sim-QVFR's Runtime composition (Le Mans Ultimate, on by default) hands the four views to your headset's own runtime, which then composes them. It only takes effect when Quad-Views Foveated Rendering is enabled in your headset's software (Pimax Play or Varjo Base). Either:
- turn Quad-Views Foveated Rendering on in Pimax Play or Varjo Base, so the runtime composes the views, or
- turn Runtime composition off in the Sim-QVFR launcher (Picture › Rendering → turn off Let the runtime compose), so Sim-QVFR composes the views itself, as on SteamVR.
The Rendering card says after each launch whether the runtime composed the views.
1.1.1-beta is a small update to 1.1.0-beta: it removes a developer-only tool that should never have been in a release. Everything else is as in 1.1.0-beta, whose notes and the earlier ones are below, unchanged.
Updating
In the launcher, open About and click Check now, then Install (close the game first). Your settings, profiles and logs stay. You can also download the zip below and extract it into a new folder. Don't put Sim-QVFR under Program Files: the launcher can't save its settings there.
New in 1.1.1-beta
- Removed a developer-only tool. In Le Mans Ultimate, Sim-QVFR 1.0.2-beta to 1.1.0-beta saved a copy of the game's program into Sim-QVFR's
logsfolder (a file ending in-image.dump, about 30 MB, and another after each LMU update). It was meant only for developing Sim-QVFR and should never have run on your PC. It no longer exists in Sim-QVFR, and the launcher deletes those copies the next time you launch a game from it.
New in 1.1.0-beta
A new launcher
- Four tabs instead of 13 pages: Overview, Picture, Headset and Game, with the settings grouped in cards. The games are a list on the left (Ctrl+Tab still switches games), and Launch is always in the top bar.
- Overview is where the launcher opens: pick Performance, Balanced or Quality for the selected game, and see how your last session ran (frame rate against the headset's, slow frames, pixels saved, and the last five sessions as a chart). A card for each part opens its settings.
- Find a setting (Ctrl+K): type a setting's name and press Return to jump to it.
- Undo: after a change, a bar says what changed ("Feather 20% → 30%") with Undo; Ctrl+Z works too.
- Each card says when its settings apply: Changes now, Now when lowered or Next game start. Settings that depend on a switch show only while it's on, and keep their values.
- One name per setting, the headset menu's: Periphery resolution (was Outer resolution), Focus density (was Inner resolution), Focus width and Focus height (were Foveated width and height).
- Light and dark follow Windows, or pick one with the theme button. Screen readers (Narrator and others) can read and use every control.
- Every setting is still there, in the same
sim-qvfr.inikeys, so your settings and profiles carry over unchanged.
Where things moved:
| Before | Now |
|---|---|
| Launch checks | Game › Launch checks (the top bar's status shows problems and opens it) |
| Profiles | Overview (presets) and the profile menu in the top bar (Save, Paste, Manage profiles…) |
| Resolution, Foveation, Focus overlay | Picture › Resolution, Foveation, View & helmet (crop and helmet), Rendering (Runtime composition) |
| DLSS / Foveated DLSS | Picture › DLSS and DLSS-NR (LMU), or Picture › Foveated DLSS and Frame generation (ACE, ACC) |
| Headset menu, Hotkeys | Headset › Headset menu, Performance overlay, Placement and Hotkeys |
| Games, OpenXR layers, Diagnostics | Game › Games in the rail, OpenXR layers, Diagnostics |
| Report an issue | Game › Get help › Report an issue… |
| Advanced → Games → Run with anti-cheat | Game › Online racing (it now asks you to accept the risk before it turns on) |
| About | The version at the bottom of the game list (a dot there means an update is out) |
| Restore Defaults | Each card's ⋯ › Reset this card…, and Restore defaults for … in the profile menu |
Le Mans Ultimate: DLSS (experimental, NVIDIA RTX 20 series and newer)
- LMU has no DLSS of its own, so Sim-QVFR now runs NVIDIA DLSS on LMU's views itself, without changing LMU's code. Turn it on in Picture › DLSS (Use DLSS) or the headset menu's DLSS page.
- The periphery gets DLAA; the focus area gets DLAA or an upscale: Ultra quality 77%, Quality 67%, Balanced 58% or Performance 50% of its size each way, for less GPU time and softer distant textures. Changes apply while you drive (each one a short stutter).
- Presets: the periphery K (the default, steadier) or F (about half the cost, more aliasing, which eye tracking keeps out of where you look); the focus area NVIDIA's default for the mode, or K or M.
- LMU's MSAA can go off with DLSS on: DLSS then does all the anti-aliasing, for less GPU time.
- Other cars' motion (on by default, under the DLSS card's advanced options): DLSS gets each other car's own motion, so passing cars stay clean instead of smearing. In a full field it costs about 0.5 ms of CPU and 0.2-0.5 ms of GPU a frame; turn it off for headroom.
- Texture sharpening (off by default; Focus only or Focus and periphery): textures sampled sharper where DLSS works. The gain is subtle, most in the periphery.
- NVIDIA's
nvngx_dlss.dllis included (DLSS 310.9.1). To use a newer one, pick it from a game's folder with Choose… on the DLSS card; Use included goes back. - DLSS-NR (experimental, off by default, the DLSS-NR card): NVIDIA's DLSS neural rendering on the same views. You need your own
nvngx_dlssnr.dll(it isn't part of NVIDIA's public DLSS SDK, so it can't be included; a game that ships DLSS-NR has it in its folder). It's heavy, about 2 ms of GPU time per million pixels it works on (RTX 5070 Ti), so it covers the focus area only unless you turn on Periphery too. Not tested in a headset yet: reports are welcome. - The performance overlay shows + DLSS beside its CPU heading while DLSS runs.
- Uses NVIDIA DLSS through the NVIDIA DLSS SDK. NVIDIA, RTX and DLSS are trademarks of NVIDIA Corporation; Sim-QVFR is not sponsored or endorsed by NVIDIA. NVIDIA's parts come with their own terms (
THIRD_PARTY_NOTICES.md, and NVIDIA's licence in thelicensesfolder): use them only as part of Sim-QVFR, and to share Sim-QVFR, share the link to this release.
Le Mans Ultimate: multi-view rendering only, and it recovers by itself
- Multi-view rendering is now the only way Sim-QVFR runs QVFR in LMU, so there's no longer an option for it. The earlier four passes, which changed LMU's code, are gone: Sim-QVFR no longer changes, hooks or calls any of LMU's own code. It works through OpenXR and Direct3D 11, reads a few values in LMU's memory and writes two (the render scale and the eye render size).
- It recovers by itself instead of stopping for the session. If the focus views can't be made, the overlay shows a yellow Eyes only: both eyes are rendered at full resolution, a correct, sharp picture that costs more. Sim-QVFR tries again at once after you change a graphics setting in LMU, and otherwise every 20 seconds at most. You no longer need to change settings to get multi-view rendering back.
- It works at more of LMU's settings: with MSAA off at post effects Medium and High, with LMU's FSR on (which used to stop it for the session), and with the extra post-processing step some settings add between the scene and LMU's post effects (a tester's "no focus views in any race").
- Shadows with MFAA and on AMD cards: shadows no longer jump, pop in and out or show hard edges with multi-view rendering. If you turned MFAA off for LMU, you can turn it back on.
- The overlay shows which multi-view path runs: MVR for NVIDIA's multi-view rendering, SMVR for Sim-QVFR's own (any graphics card).
Le Mans Ultimate: other changes
- Less CPU time per frame with multi-view rendering: the checks Sim-QVFR makes on LMU's draws to follow its passes are cheaper, and skipped once a frame has its focus views.
- An optimization guide comes in the zip (
LMU-OPTIMIZATION-GUIDE.md, also on the project page): how to tell whether your CPU or GPU holds you back, what each setting costs (DLSS, other cars' motion, MSAA, resolution) and what to turn down first. - Running with anti-cheat now asks you to accept that a kick or ban is your own risk before it turns on.
Performance overlay (every game)
- LMU now fills in the busiest game thread and the GPU's split (game, Sim-QVFR, the rest), as the other games already did. LMU's physics thread, which keeps a core busy by design, no longer shows as the busiest.
- **Eye tracking with Run...