Wingflight Lua Suite for Ethos - Snapshot 0.0.35

Use with the 0.0.35 firmware (MSP API 22.14). Flashing keeps your settings.
Add a Motor Override page (Setup > ESC & Motors) to spin a motor from the radio for a direction check or ESC calibration. It is refused while armed and the motor stops within a second if the link drops.
Apply the Tune Advisor's suggested changes with Save, after a confirmation. Nothing is written unless the model is disarmed and the FC still holds the tune the flights were flown on.
Add the KSE4 and KSE5 dashboard themes.
Show MAIN POWER LOST in the dashboard footer, and announce a main pack that goes while the receiver stays powered.
Announce telemetry lost and recovered, only when the model was armed as the link went.
Hold the low-voltage alert for a set time (default 2 s) so a punch-out sag no longer triggers it, and optionally speak the pack or average cell voltage.
Speak in-flight adjustments once they settle, so a burst of trim clicks announces the final value.
Split Settings > Audio > Events into one page per category, with a new Link page.
Drop the battery picker down from the top as a grid, and dim the dashboard behind overlays.
Draw the header buttons as icons, and fit every page title and string on the X18.
Remember each controller's name and list the known models offline.
Widen the port label column on the Ports page.
Limit each rate field to the firmware's maximum.
Wait for the flight controller to finish the accelerometer calibration before saving it.
Raise the Reboot required and Blackbox full alerts on models with only the System Config sensor.
Log a sensor that is not sending as an empty field in the flight CSV, not as 0.
Fix the dashboard sometimes staying on loading dots after boot, keep the background task running after a page or MSP error, and cut CPU and memory spikes on the dashboard.