Skip to content

Releases

0.9.0

Choose a tag to compare

@github-actions github-actions released this 19 Nov 18:41
e07bd41

Added

  • pbx <profile> account remove signs a profile out and forgets it on this computer. It forgets the saved
    database or SFTP password and the profile's settings. --keep-data leaves its calls in the store, where search still
    finds them; --delete-data deletes them. It asks first, or takes --yes; --dry-run lists what it would remove.
    Why: WireCat Desktop removes an account with this command, and pbx could only sign out with session end. The
    password itself stays valid on the server: only the server's owner changes it.

Changed — may break callers

  • The MCP Registry entry asks which profiles to serve. It started mcp serve --profiles all, so a client that
    installed the server from the registry reached every account on the computer without the owner choosing. Now
    --profiles is a required argument with the example personal: the client asks for one profile, a
    comma-separated list or all. Why: a CLI never picks an account for the owner
    (WC-MCP-9). Watch for: a client set up from the old entry keeps --profiles all until it is set up again; a
    server added by hand or with mcp config does not change.

Fixed

  • WireCat Desktop can remove a pbx account. The manifest Desktop reads (contracts/wirecat.json) now names
    account remove and session end.

0.8.0

Choose a tag to compare

@github-actions github-actions released this 17 Nov 21:42
19e5280

Changed — may break callers

  • meetings transcribe answers the same report as the other phone CLIs (beeline, b24). The audio time is
    audio_ms, in milliseconds (was audio_seconds). Each failed call has its ref. A call with no recording is listed
    under failed with the reason recording.missing, and without_recording is gone.

0.7.2

Choose a tag to compare

@github-actions github-actions released this 16 Nov 17:33
f521202

Fixed

  • A call shows its direction, the employee and the caller's number in memo context and WireCat Desktop. pbx
    kept them only in the call's details, so other tools showed a call as a bare title. A call synced before this
    version gets them on a sync that reads it again: pbx office meetings sync --since-time <the first call's date>.
    An internal call, between two extensions, has none. See what you get from each call.

0.7.1

Choose a tag to compare

@github-actions github-actions released this 16 Nov 14:54
d9c03dd

Fixed

  • A sync no longer prints the note about asterisk.users. On a MySQL source that may not read FreePBX's
    asterisk.users, as on a plain Asterisk, every sync printed that the extension names were not read, cron runs too.
    Now the check in pbx office setup, session start and session status --check prints the note once, where you
    are looking, and a sync stays quiet. A grant given later works on the next sync. See
    names of the extensions.
  • The docs say WireCat Desktop plays a call's recording. Desktop plays it on the call's card when the recordings
    folder is on this computer, and the link meetings show prints opens the call. A recording read over SFTP stays on
    the phone system.

0.7.0

Choose a tag to compare

@github-actions github-actions released this 16 Nov 14:17
f8e51c1

Added

  • pbx office setup connects a profile question by question, and WireCat Desktop draws the same flow. It asks
    where the call records are (Master.csv, MySQL or MariaDB, PostgreSQL), whether the files are on this computer or
    on the PBX over SFTP, the database through the PBX's SSH server when it listens only there, the recordings folder
    and the countries of the phone lines. It reads the newest hour of calls to check the answers, the same check as
    session start, and saves the settings and the passwords only when that works. A refused password or setting
    takes it back to the step that has it. setup show --json, setup apply --dry-run and
    setup run apply --answer-stdin give the same flow to WireCat Desktop, in English, Russian and Spanish. See
    install and connect.
  • A changed server never gets the old password. When setup changes a database, SSH or SFTP server, its port,
    its user, or the source, a password left empty is refused (validation_error, param names the input) instead
    of the kept one being tried on the new place.
  • An unconnected profile points to setup. The message of a profile that was never connected, and the first
    screen of pbx, name pbx <profile> setup.
  • extension_names names the employees who never place a call. Set it as 101=Anna Smirnova,103=Vera Orlova,
    or in pbx office setup and WireCat Desktop. Before, an extension got a name only from the caller ID of a call it
    placed, so stats calls show listed an employee who only answers as a bare number. A name set here wins. See
    names of the extensions.
  • FreePBX's own names of the extensions. On a FreePBX MySQL, pbx reads asterisk.users with the same database
    user, the two columns extension and name only, so the admin grants access to those columns and never to the
    phones' passwords in the same table. A user without that grant syncs as before; each sync prints one note. The order:
    extension_names, then FreePBX, then the caller ID.

Changed — may break callers

  • phone_region also takes a list. The setup flow keeps the chosen countries as a list (["RU","ES"]), and
    config set phone_region es,ru now does too. A comma-separated text set earlier reads as before.

Fixed

  • A sync no longer drops an extension's name from a call it reads again. When the records read this time held no
    call that named the extension, the call kept no name for it; it now keeps the name it was saved with.

0.6.1

Choose a tag to compare

@github-actions github-actions released this 16 Nov 11:58
8d00661

Fixed

  • session start no longer waits for ever on a pipe that stays open. It reads one line per password it needs and
    stops there, so a program that keeps stdin open after the last password, as WireCat Desktop once did, gets its
    answer. A pipe that sends nothing gives up after 30 seconds with "no password was given".
  • A profile that was never connected says so. meetings sync and the other commands that read the phone system
    no longer ask for cdr_csv_path on a profile with no source settings of its own. They say the profile is not
    connected, point to install and connect, and list the profiles on this computer. A
    profile that chose cdr_source csv still gets the missing setting by name. The reason stays
    source.not-configured.
  • The docs: troubleshooting names the reason network.failed, as the error gives it; the settings and security
    pages have a contents list; the MCP server, the run record and the files on this computer have their own sections
    on the security page, out of "Recordings and consent"; two code spans no longer break across a line.

0.6.0

Choose a tag to compare

@github-actions github-actions released this 15 Nov 20:53
d5a62d6

Added

  • stats calls show counts the stored calls. It gives the calls by direction and outcome, per employee, by hour
    and by day, the missed incoming calls and whether the client was called back, and the short calls. It reads only
    the local store. See a report of the week.
  • search meetings finds a call by what was said. By words, and with --model embeddinggemma by meaning too,
    with a text model on this computer. meetings embed --yes builds the search data ahead of time, one batch per run.
    models list and models download now also offer the text models. See
    find calls by what was meant.
  • tags add, tags remove and tags list mark calls. tags add complaint --matching "refund OR complaint"
    marks every call the search finds, and a rerun marks only the new ones; --meeting <id> marks one call. See
    mark every call about refunds.
  • A database that listens only on the phone system is reached through its SSH. Set db_ssh_host, db_ssh_user
    and a key file in db_ssh_key_path, or a password; the server's key is pinned in db_ssh_host_key first. pbx
    opens the tunnel for each command and closes it after. See
    a database behind the phone system's SSH.
  • A profile can keep more than one password. A database profile can sign in to SFTP or SSH with a password too.
    session start asks each password it needs; piped, one per line. They are kept in the profile's one keyring
    entry.
  • Cloud transcription, for one profile at a time. config set transcribe_engine openai sends the speech of the
    recordings to OpenAI in place of the local model, with the key in OPENAI_API_KEY. The run says where the audio
    goes before the first piece leaves. It stays off unless the profile's own settings turn it on. See
    cloud transcription.
  • meetings show prints a WireCat Desktop link for the call in the terminal, wirecat://open/v1/meeting/…. It
    opens the call once Desktop supports links to calls.
  • meetings show names each recording's file on this computer in local_path, so WireCat Desktop can play it.
    It is null when the recording is read over SFTP. This comes with cli-core 0.668.0.
  • Master.csv and the recordings of any size over SFTP. They are read in pieces, and a connection that breaks is
    opened again where it stopped. A recording on the phone system is copied into a private temporary file for the
    time it is read, and deleted after. A WAV, GSM or M4A recording of any size is transcribed, up to an hour of audio.
  • A stereo WAV, GSM or M4A recording keeps its two channels, so recordings_channels names the caller and the
    employee on each line for these formats too.

Changed — may break callers

  • A stereo WAV, GSM or M4A call is transcribed as two channels. Its lines say Channel 1 and Channel 2, or the
    names recordings_channels gives, where they were one mixed text. meetings transcribe --replace does it for the
    calls already transcribed.
  • An MP3, Ogg or FLAC recording can be up to 64 MB, not 256 MB. That is more than an hour at usual phone quality,
    and a recording longer than an hour was never transcribed.
  • The run record names the database's requests sql.connect, sql.columns and sql.rows, not cdr.connect,
    cdr.columns and cdr.rows. A database that does not answer in time now has the reason db.timeout, and one that
    cannot be reached network.failed.

0.5.0

Choose a tag to compare

@github-actions github-actions released this 14 Nov 12:07
582ec43

Added

  • A transcript can name who said each line. Set recordings_channels to caller,employee or employee,caller,
    as your dialplan records the two sides, and each line of a stereo MP3, Ogg or FLAC recording names the caller by
    name and number, or the employee by extension and name. Without the setting the lines say Channel 1 and
    Channel 2, as before. meetings transcribe --replace labels the calls already transcribed. A call imported by
    an earlier version gets the caller's number in its label only after a sync reads it again: run meetings sync
    with --since-time at your first call before --replace. A WAV, GSM or M4A recording is still one mixed track.
    See transcribe.
  • Master.csv of any size. A Master.csv on this computer or in a mounted folder is read line by line, so a file
    over 512 MB is no longer refused, and only the calls a sync needs stay in memory. Over SFTP it is still read whole,
    up to 512 MB.
  • Hour-long recordings in WAV, GSM and M4A. These recordings can be up to 2 GB, instead of 256 MB, so an hour of
    48 kHz stereo WAV is transcribed. Every recording can still be up to one hour, and MP3, Ogg and FLAC up to 256 MB.
  • A call's metadata keeps the caller's number as client, the same form as in its title.

Changed — may break callers

  • meetings list and meetings show take --backend archive|server|both (cli-core 0.663.0, was 0.656.0).
    pbx does not ask Asterisk from these commands, so both answer from the store and say so in missing.
    meetings show takes the call's number, its meeting: ref or Asterisk's own id.
  • The meetings and events commands take the program's --json [fields] and --jsonl. They no longer have
    on/off flags of their own, so meetings list --json id,title keeps those fields.
  • A list without --limit shows the profile's defaults.limit, 20 unless set. This holds for meetings list,
    events list, search meetings and runs list; the meetings lists showed 100 before.
  • A list query's dates read the computer's zone, not UTC (started_at:today).
  • A readonly level no longer stops meetings sync. It only copies call records into the local store; deny
    still refuses it.
  • Every time flag takes one grammar (cli-base 0.100.0, was 0.98.0): ISO with or without seconds and zone, a date
    alone, today, yesterday, or 30m, 2h, 7d ago. meetings sync --since-time 2h now works.

Fixed

  • The README's limits and the overview's "What it does not do yet" say first what you can do, then what not, in
    plain words: the three call record sources pbx reads, SFTP and the one saved password, who said what in mono
    and stereo recordings, and the sizes. Install and connect
    names the Countries of your phone lines field of WireCat Desktop's connect form.

0.4.0

Choose a tag to compare

@github-actions github-actions released this 14 Nov 06:20
4847418

Added

  • Each call's description says what became of it, for meetings show, WireCat Desktop and an agent: Incoming call to 600: answered by 101 Анна Смирнова after 0:03, talk 0:24. 102 Борис Кузнецов did not answer.
  • phone_region takes several countries, es,ru, for an office whose phone lines serve more than one. A number
    written without + is read in the country it fits; one that fits two of them is kept as written, linked to no
    one, and meetings sync says how many callers that left. See
    numbers, directions and people.

Changed — may break callers

  • One call is one meeting. Every CDR row of a call (a ring group's members, a queue, a transfer) is joined by its
    linkedid, and the meeting's id is that linkedid. Its people are the caller, the employee who placed it and each
    one who answered; its metadata says what became of it (outcome: answered, voicemail, busy, no_answer, failed),
    who placed it (placedBy), who answered (answeredBy), who rang without answering (rang), what was dialled,
    the wait before the first answer (waitMs), the talk time (talkMs) and every leg. The one-row meetings of 0.3.0 and older are marked
    deleted once a sync reads their rows again into a call; meetings sync --since-time <first call> reads them all.
    A transcript made of a row meeting is made again by meetings transcribe.
  • An employee's identity is now extension:<profile>/<number> (was extension:<number>), so extension 101 of one
    profile and 101 of another are two people, not one. A script that looked people up by extension:101 adds the
    profile: extension:office/101.
  • A ring group's or queue's member who answered is named by the channel that reached them (Local/101@…), not by the
    group's number (600), and employees are named from the caller ID of the calls they make.
  • meetings show --json answers { "item": { … } }; 0.3.0 wrapped the meeting twice, as item.item.
  • Built on cli-core 0.656.0 (was 0.648.0). See the
    cli-core changelog.

Fixed

  • WireCat Desktop and the README link to the guide on wirecat.dev, now that it is
    published, instead of the README on GitHub.
  • A caller is linked to the CRM contact or messenger person with the same mobile number, as Beeline's are: the
    caller's participant now carries its phone number.
  • A recording with nothing but its header, which MixMonitor leaves when nobody talked, is no longer linked or sent to
    transcription.
  • A build starts from an empty dist/, so a renamed file no longer ships: 0.3.0 carried an unused
    dist/bin/asterisk.js.
  • Sync runs on a fresh install. A shared WireCat config (~/.config/WireCat/config.json) that could not be
    read (a byte-order mark, broken JSON, a folder in its place, an older setup shape) made every WireCat tool
    read-only and refused sync. Now only the owner's own "read only" answer limits a tool, and even then a sync runs:
    it only reads the service into the local store (cli-core 0.656.0).
  • The guide starts with what you get from your calls and the work an agent can take over: the overview says what
    pbx does and does not do yet, install and connect is one page from installation to
    the first sync, in WireCat Desktop or a terminal, and use it is built around a team's daily
    tasks, with requests to copy and a schedule.

0.3.0

Choose a tag to compare

@leemour leemour released this 13 Nov 01:50
v0.3.0
9d99f33

Changed — may break callers

  • The command is now pbx, also installed as wcat-pbx. asterisk hid the PBX's own program on a server that runs
    both. Variables start with PBX_ (PBX_PROFILE, PBX_READ_ONLY), the MCP entry is pbx-<profile>, and its tools
    are pbx_read, pbx_write and pbx_tools_search. The package, its settings and the saved passwords keep the name
    asterisk-cli, so nothing is set up again.