Repository navigation
Releases
v0.5.2
KRIECHSTROM 0.5.2
A fix for the screen reader.
Fixed
- With Charles Vestal's FM-1 Screen Reader, OCT- and OCT+ said
nothing. They say the keys' octave now: "octave plus 1", "octave minus 2", "octave 0". Thanks to João Durães for the
report.
Install
Back up first, then the web installer in Chrome or Edge,
or python3 tools/fm1_install.py kriechstrom-0.5.2.fwsc.
Files
| File | What |
|---|---|
kriechstrom-0.5.2.fwsc |
the package: the app and the update loader |
| Source code (zip, tar.gz) | the complete source of this build (GPL-3.0): GitHub's archive of the tag |
SHA256SUMS |
checksums |
Built on Felucca by Leo Kuroshita, Hügelton Instruments, with parts of
Glitchbox by erikdevos. The screen reader's device side is Charles Vestal's
(fm1-base, MPL-2.0). GPL-3.0-only. Full history:
CHANGELOG.md.
KRIECHSTROM 0.5.1
KRIECHSTROM 0.5.1
HAUNT redone: SUCK and DRAG you can hear, PRINT gone.
Changed
- SUCK is a reverse swell now, as a reversed cymbal: noise whose band opens as it rises over the beat before each
snare and clap, cut dead on the hit. Nothing is recorded, so nothing crackles. - DRAG is a tape brake on the last beat of every bar: the tape slows and its level sags, down to an octave at the
bar line with AMT at the top, and on the one it is back at once. - PRINT is gone: its ghost did not come through, and its 8-bit tape crackled. MODE is OFF, SUCK, DRAG.
Fixed
- DRAG read the oldest sample of its tape instead of the newest, so it smeared instead of slowing down.
- HAUNT turned on in the middle of a song kept a grid of its own from that moment; it sits on the song's grid from PLAY
now.
Install
Back up first, then the web installer in Chrome or Edge,
or python3 tools/fm1_install.py kriechstrom-0.5.1.fwsc. Hear SUCK and DRAG on the
site and in the manual.
Files
| File | What |
|---|---|
kriechstrom-0.5.1.fwsc |
the package: the app and the update loader |
| Source code (zip, tar.gz) | the complete source of this build (GPL-3.0): GitHub's archive of the tag |
SHA256SUMS |
checksums |
Built on Felucca by Leo Kuroshita, Hügelton Instruments, with parts of
Glitchbox by erikdevos. The screen reader's device side is Charles Vestal's
(fm1-base, MPL-2.0). GPL-3.0-only. Full history:
CHANGELOG.md.
KRIECHSTROM 0.5
KRIECHSTROM 0.5
HAUNT: the tape of the whole mix haunted, one of three ways.
Added
-
HAUNT (FX > HAUNT: MODE, AMT) on the master, one at a time:
- PRINT: print-through, as on old tape. A dark, wobbling ghost of what plays a beat later is heard before it
(a loop's next beat is what it played three beats ago). - SUCK: a reversed reverb rising into every snare and clap. The drum tracks' steps say where the next one falls;
without a drum track it rises into beats 2 and 4. - DRAG: the tape drags. Over the last beat of every bar the mix slows, about a semitone down at the end, and on the one it is back at once.
AMT sets how loud the ghost and the swell are, and how far DRAG drags. HAUNT is stored with the project; projects
of earlier versions load with it off. - PRINT: print-through, as on old tape. A dark, wobbling ghost of what plays a beat later is heard before it
Changed
- The screen reader says the page and its knobs first, then the track and its sound, and has words for more of the
screen.
Install
Back up first, then the web installer in Chrome or Edge,
or python3 tools/fm1_install.py kriechstrom-0.5.fwsc. Projects and presets of 0.1 to 0.4 load as they are. Hear
PRINT, SUCK and DRAG on the site and read about them in the
manual.
Files
| File | What |
|---|---|
kriechstrom-0.5.fwsc |
the package: the app and the update loader |
| Source code (zip, tar.gz) | the complete source of this build (GPL-3.0): GitHub's archive of the tag |
SHA256SUMS |
checksums |
Built on Felucca by Leo Kuroshita, Hügelton Instruments, with parts of
Glitchbox by erikdevos. The screen reader's device side is Charles Vestal's
(fm1-base, MPL-2.0). GPL-3.0-only. Full history:
CHANGELOG.md.
KRIECHSTROM 0.4
KRIECHSTROM 0.4
Six drum kits of its own, and the screen read aloud for blind musicians.
Added
-
Six drum kits on the DRUM engine (KIT ROOM, GATE, MARCH, ARC, ROT, SLAB), each with its own voices and its
own room or grit, not Felucca's kits re-tuned. Every hit is a short impact, not a note.- ROOM: live drums in a big room squashed by a compressor, the whole kit driven and crushed in parallel.
- GATE: the huge gated snare, a kick gated too, the kit through a 12-bit sampler.
- MARCH: only impacts: a kick with a beater click, a dry crack, boots, war drums, a drag on RIM.
- ARC: electricity: a crackle of sparks on the kick and through the snare, a hiss of current for the hats.
- ROT: digital decay: the sample rate falls through every hit.
- SLAB: power electronics, every drum made of noise.
TUNE, TONE and DECY move every lane, DRV pushes the kit's grit. Six sounds load them: ROOM KIT, GATE KIT,
MARCH KIT, ARC KIT, ROT KIT, SLAB KIT. -
Screen reader support for Charles Vestal's FM-1 Screen Reader:
plug the FM-1 in, open the reader page in Chrome or Edge and click Connect. It says where you are (the page, the
track and its sound, the four knobs), each knob as you turn it, the menu's rows, the dialogs, messages, PLAY and STOP,
in its own voice or through VoiceOver, NVDA, JAWS or TalkBack. The words come from the site; the firmware sends
nothing until a reader asks.
Install
Back up first, then the web installer in Chrome or Edge,
or python3 tools/fm1_install.py kriechstrom-0.4.fwsc. Projects and presets of 0.1 to 0.3 load as they are. Hear each
kit on its own beat on the site and read about them in the
manual.
Files
| File | What |
|---|---|
kriechstrom-0.4.fwsc |
the package: the app and the update loader |
| Source code (zip, tar.gz) | the complete source of this build (GPL-3.0): GitHub's archive of the tag |
SHA256SUMS |
checksums |
Built on Felucca by Leo Kuroshita, Hügelton Instruments, with parts of
Glitchbox by erikdevos. The screen reader's device side is Charles Vestal's
(fm1-base, MPL-2.0). GPL-3.0-only. Full history:
CHANGELOG.md.
KRIECHSTROM 0.3.1
KRIECHSTROM 0.3.1
A fix to RESONATE from 0.3.
Changed
- RESONATE rings out now. In 0.3 its strings were dull and came back quieter the longer they rang, so in a busy
mix they were hard to hear at all. They are brighter now, like metal, and ring back at the level of what struck
them: you hear the chord in every gap. AMT sets how long they ring, from half a second to about two. - The manual has the sound demos too, under each new feature, and the RESONATE demo is a sparse piece with room to
ring.
Install
Back up first, then the web installer in Chrome or Edge,
or python3 tools/fm1_install.py kriechstrom-0.3.1.fwsc. Projects of 0.3 load as they are; a project with RESONATE
on will ring louder and brighter than it did.
Files
| File | What |
|---|---|
kriechstrom-0.3.1.fwsc |
the package: the app and the update loader, built and signed by GitHub from this tag |
SHA256SUMS |
its checksum |
The source is this tag (GitHub's source archives below); the site has it as a tarball too. The package is built from
it on GitHub by the Firmware Hub's shared workflow and attested; check it with
gh attestation verify kriechstrom-0.3.1.fwsc --repo Xforsa/kriechstrom --signer-workflow zvenson/fm1-build/.github/workflows/build.yml.
Built on Felucca by Leo Kuroshita, Hügelton Instruments, with parts of
Glitchbox by erikdevos. GPL-3.0-only. Full history:
CHANGELOG.md.
KRIECHSTROM 0.3
KRIECHSTROM 0.3
New sounds and effects for the whole mix, and the wall rebuilt.
Added
- INFECT, a sidechain pedal (PEDAL > INFCT): one track reacts to another. GATE chops it on the source's hits,
DUCK makes it pump, CRUSH and FOLD let the hits distort it, RING multiplies the two, VOX is a vocoder: the drums
talk through a pad. The source can sit at LEVEL 0 as a hidden trigger. - HOWL and MIC, two GLCH waves with no oscillator: a loop that feeds itself. HOWL is a string in overdrive that
sustains and screams in tune; MIC is a microphone in front of a speaker that howls at the note. Knobs GAIN, CHAOS,
BITE, BLOOM, and eight sounds: FEEDBACK, STRUNG OUT, SCREAMER, SWELL, WOUNDED, PA HOWL, WRONG ROOM, STAGE FRIGHT. - RESONATE (FX > RESONATE): four strings on the master tuned to a chord (AMT, KEY, CHORD), rung by everything that
plays. - SPLICE (FX > SPLICE): the tape of the whole mix cut and glued back wrong. On the sixteenths a piece replaces what
plays: a repeat, a reverse, a piece from a beat ago, half speed or a cut to silence. One knob for how often and how
hard; the same project is cut the same way each time.
Changed
- WALL is a wall of sound now: the whole mix double-tracked (two drifting copies, left and right) with an octave
added under its low end, then squeezed as before. The level stays where it was. - The power-on screen shows the name as the site does: KRIECH in white, STROM in red.
- The installer shows a progress bar with a percentage, returns to the official V15 or V16, and finds an FM-1 whose
MIDI port macOS still calls by an older name. - Every release keeps the identity
FM-1_57810002.
Install
Back up first, then the web installer in Chrome or Edge,
or python3 tools/fm1_install.py kriechstrom-0.3.fwsc. Projects and presets of 0.1 and 0.2 load as they are; the new
effects start off. Hear each new feature on the site and read about it in the
manual.
Files
| File | What |
|---|---|
kriechstrom-0.3.fwsc |
the package: the app and the update loader |
kriechstrom-0.3-src.tar.gz |
the complete source of this build (GPL-3.0) |
SHA256SUMS |
checksums |
Built on Felucca by Leo Kuroshita, Hügelton Instruments, with parts of
Glitchbox by erikdevos. GPL-3.0-only. Full history:
CHANGELOG.md.
KRIECHSTROM 0.2
KRIECHSTROM 0.2
A small release on top of 0.1.
Changed
- HISS hisses only while the tape runs: while PLAY plays, and when stopped while notes sound and for a second
after. Stopped and silent, it is quiet. It opens in about 50 ms and closes over 0.6 s, so it neither clicks nor
breathes between notes.
Install
Back up first, then the web installer in Chrome or Edge,
or python3 tools/fm1_install.py kriechstrom-0.2.fwsc. Identity FM-1_57810002. Projects and presets of 0.1 load as
they are.
Files
| File | What |
|---|---|
kriechstrom-0.2.fwsc |
the package: the app and the update loader |
kriechstrom-0.2-src.tar.gz |
the complete source of this build (GPL-3.0) |
SHA256SUMS |
checksums |
Built on Felucca by Leo Kuroshita, Hügelton Instruments, with parts of
Glitchbox by erikdevos. GPL-3.0-only. Full history:
CHANGELOG.md.
KRIECHSTROM 0.1
KRIECHSTROM 0.1
The first release: dark industrial and EBM firmware for the M-VAVE FM-1, built on Felucca 1.8.2 with parts of
Glitchbox.
Install
- Back up your projects and presets (the editor's Complete backup).
- Connect the FM-1 by USB, open the web installer in Chrome
or Edge, press Install.
Or:python3 tools/fm1_install.py kriechstrom-0.1.fwsc. - The FM-1 restarts with the KRIECHSTROM splash. To hear the power-on patterns: hold HOME, SYSTEM > CLEAR ALL, OCT+,
OCT+, then PLAY.
The installer can take you back to the official V15 (Return to official V15, with M-VAVE's unmodified FM-1.fwsc).
Highlights
- GLCH engine (from Glitchbox): clipping, wavefolding, a resonant filter, bit crushing and micro-stutter; 48 sounds
- 171 sounds in 13 engines, 13 drum kits
- DICE (hold SEQ, F5) writes a new part in one of eight moods (G5)
- HAPPY ACCIDENT (hold EDIT, G5): two or three parameters of the sound change at random; hold SAVE to undo
- DAMAGE, WALL and HISS on FX > DAMAGE: tape or digital degradation, more density and width, tape noise;
the level is kept - tap-to-toggle live effects, effect pages named for players, a manual and a cheat sheet in English and Russian
Full list: CHANGELOG.md.
Manual: English,
Russian.
Notes
- Identity
FM-1_57810001, USB name KRIECHSTROM. On a Mac the MIDI port may keep an old name until the device is
removed in Audio MIDI Setup's MIDI Studio and plugged in again. - Tested on an FM-1 with the newer flash (UC25HQ80,
0xB36014). The older flash is Felucca's code path, not tested
with this release. - Felucca projects and presets load. MENU > RESTORE LAST brings back the music you left; CLEAR ALL starts fresh.
Files
| File | What |
|---|---|
kriechstrom-0.1.fwsc |
the package: the app and the update loader |
kriechstrom-0.1-src.tar.gz |
the complete source of this build (GPL-3.0) |
SHA256SUMS |
checksums |
Credits
Built on Felucca by Leo Kuroshita, Hügelton Instruments, with parts of
Glitchbox by erikdevos and ideas from
DIRGE by sinscum. Thanks to all three for the inspiration. GPL-3.0-only.
