Repository navigation
Releases
Release v1.0.3
openhouse 1.0.3
This new release of openhouse brings new features and fixes a few bugs! If you were having issues with blinking red lights on 1.0 lighthouses, try this firmware!
New: Mixed Station Mode (Using 1.0 and 2.0 lighthouses together)
- Mixed 1.0 and 2.0 basestations (experimental). 1.0 and 2.0 basestations can now be used together! Turn it on with Enable Mixed Basestations on openhouse's SteamVR settings page, or "mixedLight": true in settings.json under Monado and WiVRn. See the README's "Mixed basestations" section before using it. (#31)
SteamVR
- Pimax headsets through sboys3's driver (and in theory, regular driver?) now work, including the proximity sensor and headset standby (#32, #76)
- SteamVR now SHOULD start when you turn on a device and have the option enabled, which was not working on previous versions of openhouse
- Added a new SteamVR option to hide the devices when they lose tracking instead of holding their poses
- Fixed the SteamVR always showing Room Setup on startup. It should now use the old SteamVR room data to speed up initial room learning and get rid of the Room Setup appearing every time SteamVR starts (#82)
- Fixed trackers not reporting their battery life after connection (#83)
Tracking
- Devices with bad light no longer corrupt the room map
- LH2 OOTX wraparound is fixed which should improve OOTX solving, and base calibration is kept and shared between devices
- Fixed the cluster sum wrap and 1.0 sync disambiguation (#48)
- Fixed held poses after tracking loss and non-finite solver steps (#68, #74)
- Overall CPU reduction of the tracking (#39, #50)
- Reduced the overshoots on fast controller movements
- Loosened the basestation placement requirements, so rooms get learned a lot faster. They still do get improved over time, but they lock quicker now.
- A basestation that actually moved is now noticed and moved in the room map, it used to get stuck in its old place and keep rejecting light (#84)
- Device model scales from lighthouse_scale.json are now applied like the stock driver does. Rooms learned on older versions refine themselves automatically, no reset needed (#86)
Fixes
- SteamVR would get confused when two headsets are plugged in. Now it should use the headset that has the display cable connected (#28)
- Basestation power control SHOULD work now (needs testing)
- Fixed attach and detach of devices, the pairing menu, haptics, replugged devices and shutdown races (#49)
- "Reset to default" now restores openhouse's real defaults instead of turning everything off
- Vive tracker 1.0 and 2.0 render models are fixed (#26)
- The viewer's log Pause works on long sessions, the viewer no longer grows its memory without limit on a bad connection, openhouse-compare no longer loads openhouse as the "stock" driver, and the Linux update warning no longer shows twice (#54)
- Uninstalling keeps your recordings (#23)
- HTC trackers now expose their power, menu, grip, trigger and thumb inputs and haptics, so pogo pin accessories should work
- Wired devices should now send their inputs properly
- Learned IMU calibration from SteamVR's lighthousedb.json is used when a device's own config doesn't have it (#69).
- Added support for Shiftall FlipVR controllers Other controllers with mapped inputs should work too (#86)
- Unplugging a receiver now releases its device, so it can be paired to another receiver (#87)
- Fixed the viewer using a lot of GPU power
- The log now tells which basestation refused a device's light and by how much, which makes tracking issues a lot easier to find
- Fixed the linux installer crashing Steam
Tools and Building
- Windows builds (again...) natively with MSVC (I hate MSVC long live mingw) (#24).
- GLFW is found through pkg-config when CMake can't find it, and a warning names any missing viewer dependency (#77)
- The shell scripts are marked executable (#78)
- Fixed the tests writing into the real room map and host frame files
lhtool inputsprints each device's inputs as they change, live or from a recording (#86)
lhbs (1.0 Base station firmware)
- The laser power loop now waits for each current write to reach the laser driver. It used to run ahead of the driver, and that likely caused the red blinking laser fault some stations showed after a while (#57)
- Bad calibration value no longer bricks a station. A bad saved gibphase value used to hang the base station on every boot (#56)
- Huge number in set no longer freezes it. A huge exponent typed into a set command is now rejected instead of freezing the station (#56)
GitHub Auto Generated Changelogs
- Release a receiver's device when it disconnects, so another can be paired by @lindaobie in #87
- Fix tracker pose rejection and improve OpenVR compatibility for external tracking clients by @fnoji in #83
- Mixed basestations: steadier tracking and fewer jumps by @Zakhazerd in #85
- Shiftall FlipVR as controllers, and the stock driver's lighthouse_scale.json by @Stefan7573 in #86
New Contributors
- @lindaobie made their first contribution in #87
- @Stefan7573 made their first contribution in #86
Full Changelog: v1.0.2...v1.0.3
Release v1.0.2
openhouse v1.0.2
This release contains a bunch of new changes and necessary fixes to the driver as well as the basestation firmware.
TL;DR, if you've been having issues with 1.0 lighthouses blinking red light, or tracking being weird or broken, this release should fix most, if not all of your problems! (hopefully)
This version implements an update notifier. Unless you update to this version, you won't get notified when new versions of openhouse are released! So make sure to update to this version!!
1.0 Basestation Firmware (lhbs)
- Updated the installer to not allow flashing this firmware on 2.0 basestations
- Fixed an APC bug that caused the laser diodes to be driven too high or not enough, which resulted in blinking red light. Should be fixed
- Support for sync cables on A/B/C modes has been added
Tracking
- Moved basestations are now handled much more better. They normally wouldn't get resolved on their own. This should fix the issue of the basestation not working when it is moved
- Basestations now lock when they're accurate within 20mm at least.
- Accelerometer limits have been increased to get rid of the IMU complaining about accelerometer limits
- Headset jittering and back and forth movement should be fixed (needs more testing)
- Repeated reacquires are throttled so it doesn't continuously try to adjust it
- 2.0 lighthouses were dropping hits when the beam words were missed. Now they are no longer dropped which should improve tracking
- Added more logs to show when lights are rejected
SteamVR Driver
- Headsets not coming back from standby SHOULD be fixed (needs testing)
- SteamVR was switching to the stock lighthouse universe while playing, making the playspace move mid session. This is now fixed
- Fixed an issue where monado would crash on a missing steamvr setting key
- Added extra logs around SteamVR's automatic controller poweroff to diagnose the issue (anyone that doesn't have automatic controller poweroff working, send me your vrserver.txt log file by creating an issue here)
- Record Session are now replayable (they were broken)
Installers
- Windows installer now uses a custom installer instead of a powershell script
- Installers now carry metadata about the software which should hopefully help with false detections by Windows Defender
- Move-Item failed issues should be now fixed. The installer will warn if Steam or any other app that could be holding the driver open is running
- A new updater has been implemented which will warn users when there is a new version of openhouse available
Known issues
- Sometimes, devices bounce back and forth which I'm not fully sure if it is fixed.
- Vive 2.0 trackers have no models visible. I forgot about fixing that issue and I don't really have more time to work on for today, so this release has to be without the fix. If your devices do not appear in SteamVR view, it is fine as they should appear in games!
- If you're having issues with jittering, and you use a space calibration software (like SpaceSync or SpaceCalibrator), disable prediction and smoothing under the openhouse category in SteamVR settings!
If you encounter any issues, please create an issue or contact me on either twitter (@marquina_osu) or discord (sergiomarquina), though I'd prefer if you could make an issue here first
GitHub Automatic Release Note Generation
- lhbs: sync cable support for channels A/b/c (stock-compatible) by @waveform2k in #11
- Added the reject reason to the tracking log by @ComfyChloe in #8
- Fixed Windows installer failing while Steam is open by @ComfyChloe in #5
- Support MacOs by @rohitsangwan01 in #13
- Dropped an unseen revolution's hits when an LH2 beam word is missed by @ragesaq in #16
New Contributors
- @waveform2k made their first contribution in #11
- @ComfyChloe made their first contribution in #8
- @rohitsangwan01 made their first contribution in #13
- @ragesaq made their first contribution in #16
Full Changelog: v1.0.1...v1.0.2
Release v1.0.1
This is a new driver release that is to fix the custom basestation firmware breaking the laser calibration which resulted in the basestations going into fault mode, along with basestation solver locking the basestations with bad certaintiies. Both of which is fixed with this release.
Initial Release v1.0
This is the initial release of openhouse driver with Windows and Linux driver along with 1.0 lighthouse firmware! Both drivers install by their respective scripts, which is Install-Driver.bat for Windows and install-driver.sh for Linux. The basestation firmware contains per-platform scripts like the driver installers as well. The firmware flasher does contain instructions when it is being ran, so follow those instructions!