Repository navigation
softswitch v0.6.0
Added
- L3 interfaces:
interface vlanN ip address A.B.C.D/N(SVIs),ip arp timeout,show ip interface,show arp,clear arp. sw1 owns 10.0.10.1/24 and 10.0.20.1/24 in the test
topology and hosts route through them. l3::Router(pure): answers ARP and pings for SVI addresses, keeps the neighbour cache (RFC 826
merge rules), builds ICMP time-exceeded, queues packets per unresolved next hop with ARP
retries, and computes the route table (connected + static).- Data plane: in SVI VLANs broadcast ARP is punted as a copy and flooded; frames to the router
MAC are punted (ARP, IPv4 to an SVI address).fuzz_routertarget. - Inter-VLAN routing in the data plane: longest-prefix match, next-hop neighbour lookup, MAC
rewrite, TTL decrement with an incremental checksum update, and L2 forwarding in the egress
VLAN with its tagging. Neighbour misses are resolved by the control plane (ARP, packets queued
and released); TTL expiry is answered with ICMP time exceeded. [no] ip routing,[no] ip route PREFIX NEXTHOP,show ip route.
Install on Raspberry Pi OS / Debian bookworm (arm64)
sudo apt install ./softswitch_0.6.0_arm64.debVerify downloads with sha256sum -c SHA256SUMS.