Repository navigation
Releases
Releases · ZipEmUp-source/Mimir-releases
Mimir v0.35.0 — Járngreipr
Missions stop honestly
- Stop means stopped. Pressing Stop on a mission now shows "Stopping" until every turn it was running has really ended, instead of calling it stopped at once. Nothing new starts meanwhile, and a turn that finishes after the stop can no longer finish, pass or restart the mission; what it did is kept on record so you can check it. The same goes for a mission whose hours run out mid-turn.
- A restart during a stop never resumes work. If the desktop restarts while a mission is stopping, Mimir finishes the stop by itself only when its record shows every turn had ended. Otherwise it asks you, saying for each cut-off turn whether its process is still running, gone, or unknown, and the mission stays stopping until you confirm. Something a turn started outside its own process, like a render, may still be running, and Mimir says so.
- A failed turn asks before it tries again. A turn that failed after it started may already have changed files, so the mission now asks you to look before another attempt, instead of retrying on its own.
- Reviews must add up. A reviewer's "pass" counts only when every check has exactly one passing entry with evidence; a pass that contradicts its own checks goes back for fixing.
- No two writers on one file. Assignments that own the same file under different spellings (capital letters, backslashes,
./, a trailing dot) now take turns instead of writing at once.
Screen control
- Agents can see and use your screen, on every engine. A new switch in Settings → Agent → Screen control (off by default, and off again whenever Mimir closes) gives every agent tools to look at your monitors, read their text, click, type, press keys and scroll. Claude and Codex see pictures; DeepSeek, Mimir credits and the other text models read the screen's words with their positions, and click by those.
- You stay in charge. Turning it on asks in Mimir's own dialog, and each look and each action still asks unless screen sight and desktop control are on in Settings → Permissions. While an agent is in control a gold frame lies over that screen and a Stop bar sits at the top; Stop, or Escape three times (Windows), turns screen control off at once. Nothing is typed while a Mimir permission dialog is open.
Safer browser pairing
- Mimir asks before a new browser links. After you type the code into the Mimir extension, Mimir shows its own dialog and links the browser only when you say Yes, because any program on your computer could try codes. The extension's popup tells you to answer it. A browser you already paired connects as before.
- Wrong codes slow down, then stop. Each wrong code makes the next try wait longer, and after five, pairing stays closed until you press New code in Settings → Browser, which says so.
- The browser link no longer falls over. A malformed request from another program on your computer made the link restart, and a few in a row stopped it until you turned it off and on. Now such a request is just turned away.
Mimir v0.34.0 — Gungnir
The Mimir browser extension
- Agents can use a browser of their own. A new Mimir extension for Chrome and Edge lets your agents open tabs in a Mimir window and read, click, type, press keys, scroll and take pictures there, much like Claude in Chrome. It works on every engine, DeepSeek and Mimir credits included: agents read a page as a numbered list of its buttons, links and fields, so a model that cannot see pictures can still use it. Claude and Codex also get the screenshots.
- It stays your browser. Agents can only touch the tabs they opened, or a tab you share from the extension's button. Every such tab has a gold frame with a Stop button, the toolbar button has Stop too, and Stop holds until you press Resume. Agents never type into password or payment fields, never open browser pages or the extension store, and only use the browser while "Auto-approve web & network" is on.
- Set it up in Settings → Browser. Turn on the browser link (Mimir asks in its own dialog), load the extension folder it shows in Chrome or Edge, then type the six-digit code into the extension once. It talks only to Mimir on this computer.
- Ask Mimir about any page. The extension's button (or right-click → Ask Mimir about this) sends the page and your question to a new Mimir chat. It also shows the Lounge's song with play and skip buttons, and your credits balance.
Pairing works with the App Store phone app
- The pairing QR opens either phone app. Settings → Phone's QR used to be a link only Mimir Dev understood, so the camera could not hand it to Mimir Mobile from the App Store. It now opens a page on wellmimir.com that offers both apps and shows the address and code to type by hand. The address and code stay in the part of the link the browser never sends to the site.
Mimir v0.33.0 — Muninn
Council reviews you can pick up again
- An agent's ask keeps going when the asker stops waiting. When one phone agent asks another (a council review, research, a build), the ask gets its id and its chat at once and keeps working if the asker's turn ends or its wait runs out. Waiting too long now says "still working, not a failure" instead of stopping the ask, and losing touch with the link says the state is unknown instead of calling it failed.
- Answers that come late are not lost. The next message in the asking chat hands the agent what its earlier asks came to, by id: the answer once it is in, "still working" while it is not, or "interrupted" after a restart, so it reconciles instead of asking the same thing again. Nothing is rerun on its own.
- A council is one chat. A chat the phone opens for a council is filed under that council (its question and id), titled " · council: ", so the phone shows the whole council as one chat holding every agent's answer.
- Agents can check on and stop their asks. Two new tools beside
ask_agent:ask_statusreads where one ask, or every ask of the chat, stands (it changes nothing), andask_cancelis the one way to stop an ask.ask_agentcan also start an ask without waiting, so several agents answer side by side. Stopping the asker's run still stops what it asked for.
A setup guide, and bug reports that reach us
- A picture-by-picture setup guide. After the first-run greeting, Mimir walks you through the window in seven short pages, each with a drawing of the part it is about lit up: the message box, the model picker, the workspace and Artifacts, the approval card, pairing a phone, and reporting bugs. Everyone already set up sees it once too; Settings → Tidings → Open the setup guide shows it again.
- Bug reports now reach Mimir's developers. Until now, report in the status bar only kept the report on your computer. Signed in to a Mimir account, it now also goes to the developers, with names, emails, addresses and paths taken out. The local copy stays.
- Automatic error reports. Settings → Tidings → "Send error reports automatically" (the guide asks, with the switch on): every five minutes Mimir checks its error log and sends any new kind of error, scrubbed the same way. Never a chat or a file. The same error is counted, not sent again and again.
Messages from Mimir's makers
- A word from the people who make Mimir, and your answer. Settings → Account has a new Messages section: Mimir's developers can write to you (or to everyone) from their own page, and you can answer, or write first with an idea or a problem. The status bar says "a message for you" until you have read it, and Mimir Mobile has the same thread under Settings → Messages. Messages are free (they never use credits) and plain text, not sealed like your vault.
Mimir v0.32.2 — Huginn
Fixed
- A stopped phone run keeps its worker until it has really ended. Ten seconds after Stop, the link used to give the run's worker to the next job even when the agent was still running, so new work could start beside it. It now waits for the run to end, and Activity says "Stop requested · waiting for the agent to finish ending" meanwhile; restarting Mimir still ends it as Interrupted.
- Stopped means the same however the agent ends. A run that ended quietly after Stop now carries the same "check any partial changes" note as one that ended with an error, and its old step line is cleared.
- Real progress is told apart from signs of life. Each phone run now reports when it last made progress (words or a step), apart from the lane's own routing lines, and the snapshot gives exact counts of waiting and stopping runs, so the phone never counts from the newest 150 alone.
Mimir v0.32.1 — Huginn
Agents send GIFs that pop up
- An agent's GIF shows as a picture, like yours. When an agent puts a GIF address in its reply, as an image, a link or the bare address, the GIF is fetched into the chat and pops up in its bubble on the phone and in the window, with the words beside it kept and the link gone; an address that could not be fetched stays a link.
- Agents can search for a GIF. On the phone link, every agent has a
gif_searchtool: a few words in, real GIPHY addresses out, searched by desktop Mimir with the key you pasted (the key never reaches the agent). The Well engine and the Claude and Codex lanes all have it; Kimi, Gemini and Ares do not.
Fixed
- A message resent into a mission's chat is taken once. When a phone lost the answer to a message it wrote in a mission's chat and sent it again under the same request, the change of direction was filed twice. The link now remembers the request and answers the resend with the change it already took (a different message under the same request is refused, as in every other chat).
Mimir v0.32.0 — Huginn
A GIF button, like Messages
- GIFs from a drawer, not a pasted link. A GIF button sits beside the message box on the desktop and on the phone: type a word, see the GIFs, tap one and it is sent, with whatever words were in the box. The search runs on GIPHY with a free key of your own, pasted once under Settings → General → GIFs on the PC. The key stays in the protected store and the search runs in Mimir itself, for the window and for your phones alike; a phone never sees it. A GIF sent from the drawer shows as the picture alone, and agents read it (with its frames) as before.
- Paste the GIPHY key from your phone. Mimir Mobile's Settings → Desktop has a GIPHY key field: the key goes over the link to desktop Mimir, which files it in its protected store exactly as Settings would, so the drawer can be set up when nobody is at the PC.
Fixed
- A run stopped before it started no longer says "Waiting for the desktop" — Activity on the phone showed the queue line under Stopped; the link now says "Stopped before it started", and the phone says the same for an older desktop.
Mimir v0.29.2 — Thing
Fixed
- Each phone keeps its own "Call me by" name — the name, standing instructions and swearing setting on Mimir Mobile's Identity screen now belong to the phone that saved them, so two phones signed in to the same Tailscale account, or two people sharing one, each keep the name they set. A phone message in a desktop chat, and in other phones' chats, now shows that phone's chosen name. A phone that has not saved one yet starts from what it had before.
Mimir v0.29.1 — Thing
Fixed
- Round-table agents no longer time out before they speak — a round table starts every seat at once, and each mirror had only 30 seconds to come up and accept its turn (Codex: 20 seconds to start, then 30 for its thread). With several CLIs launching side by side, and Windows scanning each one as it starts, seats failed with "timed out waiting for initialize" or "thread/start" without saying a word. They now get two minutes to start, the same patience the main Codex lane has, and if one still does not come up the message says it never started.
Mimir v0.28.5 — Bifröst
New
- Game view: Mimir sees your game, and can keep watching it — Panels & tools → Game view docks beside your chats. Pick the game's window from the list (or type the path of its .exe or Steam/Epic .url shortcut under "Start a game" and Mimir picks the window when it opens) and its live picture shows in Mimir. Mimir reads only that one window, after you say yes, until you press Let go. Show Mimir puts the picture on your next message; Link to this chat sends a fresh picture with every message in that chat. Keep watching starts a chat of its own that is sent a new picture every 30 s to 10 min (by default only when the picture changed) and answers with what changed, what looks wrong and what to fix, while you keep working in your other chats; it runs until you stop it, the game closes, or three turns fail in a row. The game stays its own window: games drawn full screen break when another program pulls them inside, so Mimir watches the window instead. A game that draws black through the window route is read from the screen under it while it is visible.
Fixed
- A terminal window opened when a phone agent on Codex answered — Mimir started Codex through npm's
codex.js, which starts the realcodex.exewithout hiding it, and since Mimir runs without a console Windows gave Codex a visible terminal of its own (a Windows Terminal tab on Windows 11), right over a game. Mimir now starts thatcodex.exeitself, hidden, for phone agents, desktop chats, sign-in and the model list. The desktop's command tool, the computer-ID check and cancelling a command no longer flash a console either.
Mimir v0.28.3 — Bifröst
New
- Animation tests for voxel models — the Voxels tab (and the 3D stage's object settings) has an Animation menu: Idle, Walk / drive, Hop, Fly, Spin jump and Look around, played on every model at once so you can watch how the cubes, the shading and the shadows hold up in motion. Legs swing in a trot, heads turn and nod, tails wag, ears twitch, wings flap, wheels roll and a propeller spins, each about its own joint; Hop squashes and stretches, Fly lifts off and banks. The built-in animals and vehicles come rigged, and Mimir tags the parts of its own designs the same way (a
boneon each part; the guide says how). Mimir Mobile's Voxels screen has the same tests.
Fixed
- The Creative Studio closed when you asked Mimir for a design — Ask Mimir to design it, Improve and Fix put the request in the chat box and closed the Studio so you could press Send. The request now starts right away while the Studio stays open: in the chat you were in when it is idle with an empty box, otherwise in a new chat, so nothing you were writing is touched. The Voxels tab shows how Mimir is doing, lets you Allow or Deny what it asks for right there, and has a Go to chat button; a new design comes onto the stage by itself when Mimir writes it.