Repository navigation
Releases
v1.4.3
A fix for the any-category load splitter (Duskfade-LoadSplitter.asl). The Save Editor and the any% splitter are unchanged apart from the version number.
Bug fix:
- Auto-start is now reliable. The load splitter only started the timer if the main menu was followed directly by the intro cutscene, but the game always passes through a brief loading step in between, so it often didn't start at all. It now starts the moment you leave the main menu, exactly the same moment as the any% splitter, so times from both splitters line up.
Good to know:
- Pressing Continue outside a run can also start the timer now. That isn't a real run, so just reset. During a run nothing changes: the timer is already running, and quitting to the menu and continuing still won't split or reset.
- Auto-reset is off by default in this splitter, so if you abandon an attempt by quitting to the menu, reset LiveSplit before your next New Game, or the timer won't auto-start (it's still running from the old attempt).
Updating: download the new Duskfade-LoadSplitter.asl (attached below, or from the repo) and point your Scriptable Auto Splitter component at it.
No save format changes.
v1.4.2
A second LiveSplit autosplitter, for categories other than any%. The Save Editor is unchanged apart from the version number.
New: Duskfade-LoadSplitter.asl, for 100%, all achievements, and anything else that doesn't follow the fixed any% route.
- Starts on New Game. Pressing Continue on a save never starts it, since a run is one save from New Game to the credits.
- Splits every time you arrive in a different level, revisits included. Coming back to TickTown for the third time splits just like the first. Dying or retrying in the same level doesn't split.
- Ends on the credits.
- Quitting to the main menu and continuing doesn't split or reset. The timer just keeps running. (Auto-reset on the menu is off by default in this one.)
- One checkbox per level under "Split every time you enter:". A checked level splits on every visit and an unchecked one never splits.
- Load removal works the same as in the any% splitter: compare against Game Time.
Your splits file needs one segment for every arrival at a checked level (count every revisit), plus the credits.
Not yet tested in a full live run, so reports from 100% runners are very welcome.
Which one to use: Duskfade.asl for any%, Duskfade-LoadSplitter.asl for everything else. Only use one at a time, or every split fires twice. Both are attached below and in the repo, and setup is in the README.
Also: Duskfade.asl's comments were tidied up. Its behavior is unchanged.
No save format changes.
v1.4.1
Another autosplitter-only release. The Save Editor is unchanged apart from the version number.
Bug fix:
- Wrong warp out of Guayota no longer skips the TickTown split. Teleporting out of Guayota with the wrong warp drops you at TickTown's default spawn without the game writing a save, so the "Ticktown (post-Volcano)" split never fired. The autosplitter now also splits when the game loads the next zone on your route, even if no save was written. A normal exit still splits on the save as before, with no double splits. This works the same way for any future skip that reaches the next zone on your route without saving. It's on by default and can be turned off in the autosplitter settings under "Also split on level load when no checkpoint save happens (wrong warps)".
If you'd removed the Guayota split and were splitting on leaving TickTown as a workaround, you can go back to the normal Guayota split.
Updating the autosplitter: download the new Duskfade.asl (attached below, or from the repo) and point your Scriptable Auto Splitter component at it.
No save format changes.
v1.4.0
This release is all about the LiveSplit autosplitter (Duskfade.asl). The Save Editor itself is unchanged apart from the version number.
New:
- Load removal. The autosplitter now pauses LiveSplit's Game Time during loading screens. To see load-removed time, right-click LiveSplit → Compare Against → Game Time. Contributed by @c3pown in #1, thanks! It reads a fixed memory address, so a future game patch may break it until the script is updated.
Bug fixes:
- No more instant split at 0:00 on a repeat attempt. When you started a new attempt in the same LiveSplit session, the save file's leftover zone from the previous attempt could be mistaken for a new transition. Splits now only fire when the game actually writes a new save.
- Walking back into an earlier zone no longer skips splits. TickTown shows up several times in the route. Backing out of a zone into a TickTown you'd already passed (e.g. Forest1 → TickTown) could jump the tracker ahead to TickTown's next appearance, firing a wrong split and skipping everything in between. Revisits are now ignored.
- Route tracking resets when the timer starts or resets, instead of being re-checked every tick.
Updating the autosplitter: download the new Duskfade.asl (attached below, or from the repo) and point your Scriptable Auto Splitter component at it.
No save format changes, no new settings.
v1.3.1
Bug fixes:
- ASL autosplitter: fixed splits getting silently skipped on a second run after a reset. The starting TickTown checkpoint (before Forest1) wasn't in the split route, and its name collides with 4 later route entries (post-Volcano/Library/Boss3/Boss4). When the split pointer freshly reset to the top for a new run, the forward-scanning matcher could latch onto the wrong later occurrence of "TickTown" and silently skip everything in between (e.g. all of Forest1 through Guayota Boss). Fixed by giving the starting TickTown its own non-splitting route entry so the pointer consumes it correctly instead of leaving it ambiguous.
- Save Editor: the "Loaded"/"Applied" confirmation after Load, Unlocks, Outfit, or Shards is no longer a click-to-dismiss popup. It previously showed even with "Skip confirmations" checked (that setting only ever covered the before prompt) and looked like a generic Windows dialog instead of matching the rest of the app. Now it's a short status message that flashes in the hint row and clears itself after a few seconds.
No save format changes, no new settings.
v1.3.0
Requested feature additions from user feedback.
New
- Skip confirmations checkbox — turns off the "are you sure" dialog before Load/Unlocks/Outfit/Shards (and hotkey-triggered) actions, for anyone doing lots of repeat loads. Off by default; the automatic backup is what actually keeps this safe, not the dialog.
- Hotkeys — assign F1-F12 to instantly load a specific save (right-click a row → "Assign Quick-Load Key...") or toggle a specific ability/gadget/upgrade on your active save (new "Hotkeys" button). E.g. bind F5/F6 to two practice spots to swap between them instantly, or F8 to grant an ability like Crunia's Wings while exploring. Manage/remove every assignment from the Hotkeys dialog.
- The live save folder path moved behind a Save Folder... button instead of always sitting in the top bar, freeing up room for the controls above.
Fixes/tweaks
- Top bar controls reorganized: Save Folder... on the left, Active slot / Lock default slot / Skip confirmations grouped on the right.
- Checkpoint table gained a "Key" column showing any assigned quick-load hotkey.
Both zip and bare exe are self-contained (starter checkpoint library + icon built in). Windows will show a SmartScreen warning on first run — click "More info" → "Run anyway", this is expected for a small unsigned tool.
v1.2.0
What's new
- Safer writes everywhere: Load, Unlocks, Outfit, and Shards now all write atomically (temp file + swap), so an interrupted write can never leave your save half-written.
- Confirmation before every edit: Unlocks, Outfit, and Shards now show the same themed confirmation dialog Load Selected Save already had, spelling out exactly what's about to change before anything is written.
- Backups now auto-prune: each save slot keeps its newest 30 backups (configurable via
backup_retention_countin config.json) and prunes older ones automatically, soBackups\no longer grows forever over a long session. - Manual restore documented: there's no in-app Restore button, but
Backup-README.md(bundled in this release) walks through the short manual steps to put an older backup back in place. - Internal cleanup: several duplicated code paths (backup-before-write, the save-patching logic, dialog boilerplate) were consolidated -- no user-facing change, just less places for a future bug to hide.
Downloading
DuskfadeSaveLoader-v1.2.0.zip-- everything you need: the exe, icon, a starter checkpoint library (113 any%-route checkpoints), and both READMEs. Use this for a fresh download.DuskfadeSaveLoader.exe-- the bare exe, fully self-contained on its own (builds its own Library/config on first run). Only needed if you're letting the in-app updater fetch it for you.
Windows will warn you before running it (unsigned exe from a small community project) -- click "More info" -> "Run anyway".
v1.1.3 - Shards editing
New
- Shards panel — set the exact shard (currency) count on your active save, same backup-first / apply-on-Retry pattern as Unlocks and Outfit.
Install
Grab DuskfadeSaveLoader-v1.1.3.zip, unzip anywhere, run DuskfadeSaveLoader.exe. Already have it installed? The in-app updater will offer this version automatically.
v1.1.2
Renamed the app's display name to "Duskfade Save Editor" -- it does a lot more than load saves now (Unlocks, Outfit). This is display-only: the exe/asset are still named DuskfadeSaveLoader.exe on purpose, so the in-app updater keeps working normally for every existing install with no extra steps.
Also fixed a stale subtitle that still mentioned "your own saved spots" -- that feature (Save Current Spot As...) was removed a while back; only auto-captured checkpoints are browsable now.
No changes to how anything is stored on disk.
v1.1.1
Patch fix for the Unlocks panel introduced in v1.1.0: Ability Upgrades and Gadget Upgrades were mislabeled "Tier 1-4", implying four sequential upgrade levels of one thing. They're actually the upgrade for each individual ability/gadget (same order as the Abilities/Gadgets lists) -- e.g. slot 0 under Ability Upgrades is Hook's upgrade, not "tier 1". Relabeled accordingly.
Minutero and Cuco upgrades really are sequential tiers, so those two keep "Tier 1-4" unchanged.
No changes to how anything is stored on disk -- this is a labeling fix only, existing saves and any Unlocks changes you've already made are unaffected.