v1.9.3

Fix

• Input model selector: removed the plugin-side width cap. The max-width patch we added on 2026-08-21 to work around an upstream responsive bug is no longer needed — the input bar now lays out correctly with long model names, so the cap is gone and the selector renders at its natural width.
• Git status now refreshes inside worktrees / submodules. Those checkouts store .git as a file (gitdir: <path>) instead of a directory. Our HEAD watcher resolved join(dir, '.git', 'HEAD'), which failed with ENOTDIR and was silently swallowed — so switching branches in a worktree never triggered a HUD refresh. We now read the gitdir: pointer and watch the real HEAD.

Compatibility matrix

• dsh.compatibility.dshReleases now also records "0.2.1-rc.1": "compatible" and "0.2.1-rc.2": "compatible".

Version compatibility

• DSH 0.1.7 and later, including 0.2.x — this release (v1.9.3): peer range ^0.1.7-rc.1 || ^0.2.0-rc.1.
• DSH 0.1.5 and older — install v1.4.1: that line keeps the old behavior and uses no 0.1.7-only API.
• Maintenance policy: this plugin keeps evolving with the latest DSH releases; compatibility with older DSH versions is best-effort only and not guaranteed going forward.

中文说明

• 输入区模型选择器：移除插件侧的宽度上限。2026-08-21 加的那个 max-width 补丁是为了绕过官方响应式 bug，官方已修复 —— 现在长模型名也能正常单行显示，补丁已删除。
• Git worktree / submodule 下也能自动刷新了。这类工作区分支把 .git 存成文件（内容 gitdir: <path>），我们原来监听 join(dir,'.git','HEAD') 会 ENOTDIR 且被静默吞掉，导致 worktree 里切分支 HUD 不刷新。现在先解析 gitdir: 指针，再监听真实 HEAD。
• 兼容矩阵补录 "0.2.1-rc.1" / "0.2.1-rc.2" = compatible。

版本兼容

• DSH 0.1.7 及以后（含 0.2.x）—— 本版（v1.9.3）：peer 范围 ^0.1.7-rc.1 || ^0.2.0-rc.1。
• DSH 0.1.5 及更早 —— 装 v1.4.1：那条线保留旧行为，且不使用任何 0.1.7 才有的 API。
• 维护策略：本插件将持续跟随 DSH 最新版本演进；对旧版 DSH 的兼容仅是尽力而为、不保证长期有效。

HUD v1.9.2 — 父行 = 整组开关（状态合并）

Fix

• The group parent row and the group's expanded state are now one single state: its arrow, its own file section and the list of sub-repos open and close together. Previously they were two independent states, so the row could look collapsed while the sub-repos were still listed, and an expanded group could not be collapsed with one click.
• Your manual choice is still remembered (localStorage) — if you had expanded a group before, one click on the parent row now collapses it back to the single ✓ N repos line.

中文说明

• 整组父行与整组展开状态合并为同一个状态：父行箭头、它自己的文件区、子仓库列表三者同开同合。此前是两套状态，会出现箭头看着是收起的、子仓库却还列着，而且展开后点一下收不回去。
• 手动选择照旧记住（localStorage）：你此前展开过的那一组，现在点一下父行就能收回一行 ✓ N 仓。

HUD v1.9.1 — 修：整组展开后收不回去

Fix

• The parent row is now a real group toggle: clicking it while collapsed expands the whole group, and clicking it again collapses everything back to the single ✓ N repos line. Previously only the expand direction was wired, so an expanded group could not be collapsed again.

中文说明

• 父行改成真正的整组开关：收起态点开 = 展开整组；展开态再点 = 连子仓库一起收回一行。此前只接了展开这一半，导致展开后收不回去。

HUD v1.9.0 — 整组折叠 + 按需刷新

Features

• Group folding in the repo tree. Sub-repos under the same workspace / watched repo now form one group: when everything is clean only the parent row is shown (with ✓ N repos) and no sub-folder names are listed at all; when something is dirty only the dirty sub-repos are listed and the rest collapse into a single ▸ N more clean repos row. Clicking the parent row expands the whole group, and your manual toggles are still remembered (localStorage).
• Refresh on demand. File changes now go through a cheap fingerprint (one shell call returning each repo's change count / branch / ahead-behind / HEAD): a full refresh runs only when the fingerprint changed, or — while something is dirty — at most once every 5 seconds so +/- details stay fresh. A clean multi-repo workspace now costs one shell call per change instead of one shell call per repo.

Version compatibility

• DSH 0.1.7 and later (including 0.2.0-rc.2) — this release (v1.9.0): peer range ^0.1.7-rc.1 || ^0.2.0-rc.1; dsh.compatibility.dshReleases marks 0.1.7-rc.1 / 0.1.7-rc.2 / 0.2.0-rc.1 / 0.2.0-rc.2 as compatible.
• DSH 0.1.5 and older — previous tag v1.4.1 (dsh plugin add github:a903067276-rgb/dsh-hud#v1.4.1): keeps the old behavior and uses no 0.1.7-only API.
• Compatibility with older DSH versions is best-effort only; this plugin tracks the latest DSH releases.

中文说明

• 文件树整组折叠。 同一"工作区 / 关注仓库"下的子仓库现在算一组：全干净时只留父仓库一行（右侧 ✓ N 仓），子文件夹名字一个都不列；有改动时只列有改动的子仓库，其余收成一行「▸ 另外 N 个干净仓库」。点父行可展开整组，手动开关照旧记住（localStorage）。
• 刷新按需升级。 文件变化先走"轻量指纹"（一次 shell 拿回各仓库的改动数 / 分支 / 领先落后 / HEAD）：只有指纹变了才拉全量；有脏仓库时最多每 5 秒补一次全量（保证 +/- 明细新鲜）。干净的多仓工作区现在每次变化只花 1 次 shell（此前是每个仓库 1 次）。

版本兼容

• DSH 0.1.7 及以后（含 0.2.0-rc.2）—— 装本版（v1.9.0）：peer 范围 ^0.1.7-rc.1 || ^0.2.0-rc.1；矩阵中 0.1.7-rc.1 / 0.1.7-rc.2 / 0.2.0-rc.1 / 0.2.0-rc.2 均为 compatible。
• DSH 0.1.5 及更早 —— 装上一版 tag v1.4.1：保持旧行为，不含 0.1.7 专用 API。
• 旧版 DSH 兼容为 best-effort（尽力而为、不保证）；本插件跟随 DSH 最新版本演进。

v1.8.1

Fix

• DSH 0.2 support. Since 0.2 the host gates profile bundles on peer compatibility: a plugin whose declared peer range misses the running host is skipped entirely (skipping profile bundle), which silently removes its tools and routes. The @deepseek-ai/dsh peer is now ^0.1.7-rc.1 || ^0.2.0-rc.1, and dsh.compatibility.dshReleases declares "0.2.0-rc.1": "compatible" after verification on a real 0.2.0-rc.1 host and a shadow instance.
• Removed a dead settings.plugin.item client registration (no shipped host declares that slot — the live entries are the settings.section page and the Plugins page's plugins.bundle.config), together with the component that only it used.
• Removed the long-dead apiProxy lookup (the host removed apiProxy back in 0.1.2); the panel's model field stays null and renders as —.

Version compatibility

• DSH 0.1.7 and later (including 0.2.0-rc.1) — this release (v1.8.1): peer range ^0.1.7-rc.1 || ^0.2.0-rc.1; dsh.compatibility.dshReleases marks 0.1.7-rc.1 / 0.1.7-rc.2 / 0.2.0-rc.1 as compatible.
• DSH 0.1.5 and older — previous tag v1.4.1 (dsh plugin add github:a903067276-rgb/hud-simple#v1.4.1): keeps the old behavior and uses no 0.1.7-only API.
• Compatibility with older DSH versions is best-effort only; this plugin tracks the latest DSH releases.

中文说明

• 兼容 DSH 0.2。 0.2 起宿主按 peer 范围门禁 profile bundle：范围不覆盖当前运行时的插件会被整包跳过（日志 skipping profile bundle），插件工具与路由会一起静默消失。现将 @deepseek-ai/dsh peer 改为 ^0.1.7-rc.1 || ^0.2.0-rc.1，并在 dsh.compatibility.dshReleases 声明 "0.2.0-rc.1": "compatible"（已在 0.2.0-rc.1 真机与影子实例上验证）。
• 删掉无效的 settings.plugin.item 客户端注册（官方两版都没有这个插槽；真正生效的是 settings.section 页面与插件页的 plugins.bundle.config）及其专属组件。
• 删掉 0.1.2 起就被官方移除的 apiProxy 死路径（面板的模型字段保持 null，显示 —）。

版本兼容

• DSH 0.1.7 及以后（含 0.2.0-rc.1）—— 装本版（v1.8.1）：peer 范围 ^0.1.7-rc.1 || ^0.2.0-rc.1；矩阵中 0.1.7-rc.1 / 0.1.7-rc.2 / 0.2.0-rc.1 均为 compatible。
• DSH 0.1.5 及更早 —— 装上一版 tag v1.4.1：保持旧行为，不含 0.1.7 专用 API。
• 旧版 DSH 兼容为 best-effort（尽力而为、不保证）；本插件跟随 DSH 最新版本演进。

v1.8.0 — 设置页可改（提交条数 / 余额三档 / 预设）

把之前只在插件 Config 里、设置页看不到的选项做成了卡片：提交记录条数、余额模式（关/官方/自定义）、余额预设与自定义字段。保存即时生效、不用重启。

v1.7.0 — 余额三档可选 + 提交记录可配 + 按改动自动折叠

• 余额三档：balanceMode = off / official / custom（balanceUrl/Header/TokenEnv/Path/Currency），另有 balancePreset 预设 kimi / siliconflow / openrouter / zai / one-api / deepseek 一键带好地址与路径
• one-api 系 quota 单位换算 balanceScale、OpenRouter 两字段相减 balanceSubtractPath、DMXAPI 第二个头 balanceExtraHeader
• 安全闸：自定义地址必须 https（本机除外）、不跟随 302、key 只走请求头、200 但解析不到时提示一次
• 提交记录由 commitCount 配（默认 10，1~50），默认收起
• 折叠按改动走：干净仓库收一行（带 ↑↓），有改动自动展开到文件层，手动选择记住

HUD v1.6.1 — 点进插件就能看到设置

DSH 0.1.7+.

Fixed

• The settings card is now also rendered on the package page (one click into the plugin), not only on the component row page: registered through the keyed slot (key = package name).

中文

• 设置卡现在点进插件的第一级（包详情页）就能看到，不必再钻到组件行：走 keyed 槽 （键 = 包名）。原来只挂了组件行那级，观感像点进去没有详细设置。

HUD v1.6.0 — 设置卡进官方插件区

DSH 0.1.7+. On DSH ≤ 0.1.5 install the previous tag.

Added

• The full settings card now also renders inside the official Plugins page: Plugins → HUD → component row → Configure. Registered through the keyed plugins.row.config slot (key dsh-hud#<entry>), reusing the same card component as the Settings page (inCard).

中文

• 完整设置卡现同时在官方插件区渲染：插件 → HUD → 组件行 → Configure；走 keyed 槽 plugins.row.config（键 = 包名#条目id），与设置页共用同一组件。

v1.5.2 — 图标优化

图标重画：小尺寸可读性 + 与同类插件区分（详见提交信息）。DSH 0.1.7+；≤0.1.5 请装旧 tag。