Skip to content

Releases

Open GHub 0.1.2

Choose a tag to compare

@github-actions github-actions released this 20 Oct 10:38

What's new

On-board memory

  • View the profiles stored inside your mouse: DPI levels, report rate, button bindings and the factory profile (Device settings → On-board memory).
  • Edit a slot's DPI levels, starting level and report rate. These settings work even with Open GHub closed, in on-board memory mode.
  • Every write is backed up first and verified by reading it back. You can save a backup to a file and restore it at any time.

Other changes

  • The installer now shows a privacy notice. Update checks can be turned off in App settings.
  • Releases are built by GitHub Actions, ready for code signing through the SignPath Foundation.
  • A new README, contributing guide and issue forms. Device reports are welcome!

Tip: quit G HUB while using Open GHub. On-board memory writes are refused while G HUB's agent is running.

Open GHub 0.1.1

Choose a tag to compare

@abidr abidr released this 20 Oct 09:43

What's new

  • Automatic updates. Open GHub now checks this repository's releases shortly after it starts and every 6 hours, even while it's in the tray. When a new version is available you get a notification, an "Install update" item in the tray menu, and an Install button in App settings. Updates are signed, and Open GHub verifies each download before installing it.
  • App settings (gear icon, top right): see your version, check for updates now, and choose whether updates install automatically (off by default).
  • Your profile is reapplied when the mouse reconnects. Settings applied in software mode are lost when the mouse powers off. Open GHub now applies your active profile again at startup, after the mouse is switched off and on, and after it wakes up.
  • License: Open GHub is now free software under GPL-3.0-or-later. The installer shows the license.

Fixes

  • When started with Windows (minimized to the tray), Open GHub didn't detect the mouse until it reconnected.
  • A mouse that was asleep during a device scan wasn't picked up when it woke.
  • Repeated identical reports from the mouse, such as G HUB polling the battery every few seconds, no longer trigger extra work.

Install

Updating from 0.1.0: version 0.1.0 has no updater, so install this version manually once. Download Open-GHub_0.1.1_x64-setup.exe below and run it; your profiles and settings are kept. Later versions will update automatically.

It installs for the current user and doesn't need administrator rights. Requires Windows 10 or 11 (64-bit). Quit G HUB from the system tray while using Open GHub, or it may reapply its own settings.

Windows SmartScreen may warn that the app is unrecognized, because the installer isn't code-signed. Choose More info → Run anyway if you trust this release.


Licensed under GPL-3.0-or-later. Open GHub is an independent project and is not affiliated with, endorsed by or supported by Logitech. Logitech, Logitech G, G HUB and LIGHTSPEED are trademarks of Logitech.

Open GHub 0.1.0

Choose a tag to compare

@abidr abidr released this 20 Oct 00:15

First release of Open GHub, a lightweight, standalone configurator for Logitech gaming mice. It talks to the mouse directly over HID++ and does not need G HUB.

Features

  • Device detection for mice connected by cable or through a LIGHTSPEED / Unifying receiver, named from a built-in table of 110 Logitech G products
  • DPI: up to 5 levels, separate X/Y and lift-off distance on mice that support them
  • Report rate: 125 to 8000 Hz, depending on the mouse
  • On-board memory / software mode switch
  • Profiles per game, with automatic switching when the game comes to the foreground, and optional import from G HUB
  • System tray: battery and active profile, quick profile switching, Start with Windows
  • Low-battery notifications at 15% and 5%
  • Lightweight: about 27 MB of RAM in the tray, with no WebView2 processes running while the window is closed. Event-driven, so idle CPU use is close to zero.

Install

  1. Download Open GHub_0.1.0_x64-setup.exe below and run it. It installs for the current user and doesn't need administrator rights.
  2. Quit G HUB from the system tray if it's running. Otherwise it may reapply its own settings.

Requires Windows 10 or 11 (64-bit). The WebView2 runtime is preinstalled on Windows 11 and is downloaded by the installer if missing.

Windows SmartScreen may warn that the app is unrecognized, because the installer isn't code-signed yet. Choose More info → Run anyway if you trust this release.

SHA-256: 22f6c07840cae7a67c5656af727d19c4eea93357babdf59d66f34544ebed9e00

Known limitations

  • Tested on a PRO X SUPERLIGHT. Other HID++ 2.0 mice should work, but haven't been tested.
  • Newer models (PRO X SUPERLIGHT 2, G502 X, PRO 2) show their firmware name until they're added to the device table.
  • Profiles are applied in software. Settings aren't yet written to the mouse's on-board memory, and button remapping isn't supported yet.

Open GHub is an independent project and is not affiliated with, endorsed by or supported by Logitech. Logitech, Logitech G, G HUB and LIGHTSPEED are trademarks of Logitech.